BLACK+DECKER Dual Charger (BDDC201B) Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BLACK+DECKER Dual Charger (BDDC201B). This dual charger is designed to charge two BLACK+DECKER 20V MAX* batteries simultaneously, minimizing downtime and ensuring your POWERCONNECT products are ready for use. Please read this manual thoroughly before initial use and retain it for future reference.

Important Safety Information

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions: Before using the charger, read all instructions and cautionary markings on the charger, battery pack, and product using the battery pack.
• Indoor use only: Do not expose the charger to rain or wet conditions. It is intended for indoor use only.
• Use only recommended batteries: Charge only BLACK+DECKER 20V MAX* Lithium-Ion battery packs. Other types of batteries may burst, causing personal injury and damage.
• Proper ventilation: Ensure adequate ventilation around the charger during operation. Do not block ventilation openings.
• Avoid damage: Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged. Take it to an authorized service center.
• Unplug when not in use: Unplug the charger from the outlet when not in use or before cleaning.
• Do not short-circuit: Never attempt to short-circuit the charger terminals.
• Supervision: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Setup

Unpacking

Carefully remove the BLACK+DECKER Dual Charger from its packaging. Inspect the charger for any signs of damage during transit. If any damage is observed, do not use the charger and contact customer support.

Connecting the Charger

1. Locate a stable, dry surface for the charger.
2. Plug the charger's power cord into a standard 120V AC electrical outlet. The charger is now ready to accept batteries.

Image: The BLACK+DECKER Dual Charger (BDDC201B) with its attached power adapter. The charger unit is black with orange accents and features two battery slots and LED indicators. The power adapter is a compact black block with a standard two-prong plug.

Operating Instructions

Charging Batteries

The BDDC201B Dual Charger is designed to charge one or two BLACK+DECKER 20V MAX* Lithium-Ion batteries simultaneously.

1. Ensure the charger is plugged into a working electrical outlet.
2. Slide a 20V MAX* battery pack into one of the charging ports on the charger. Ensure the battery is fully seated.
3. Repeat for the second battery pack if charging two simultaneously.
4. The LED indicators on the charger will illuminate to show the charging status.

Image: The BLACK+DECKER Dual Charger shown alongside two 20V MAX* Lithium-Ion batteries. This visual demonstrates how the charger can accommodate two batteries for simultaneous charging, highlighting its dual functionality.

LED Indicator Status

Approximate Charging Times

• One 20V 1.5 Ah battery: Approximately 1.5 hours
• Two 20V 1.5 Ah batteries: Approximately 3 hours

Note: Charging times may vary based on battery condition, ambient temperature, and power source.

Maintenance

Cleaning

Unplug the charger before cleaning. Use a soft, dry cloth to wipe the exterior surfaces of the charger. Do not use water or harsh cleaning agents. Keep the charging ports free of dust and debris.

Storage

Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store battery packs in the charger for extended periods. Store battery packs separately in a cool, dry place.

Troubleshooting

If your BLACK+DECKER Dual Charger is not functioning as expected, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, please contact BLACK+DECKER customer support for assistance.

Specifications

• Model: BDDC201B
• Input Voltage: 5 Volts (as per product specifications)
• Output Voltage: 20 Volts (2E+1 Volts as per product specifications)
• Charging Current: 1 Amp (Dual charger)
• Product Dimensions: 7.64 x 2.56 x 7.24 inches (D x W x H)
• Item Weight: 9.2 ounces
• Manufacturer: BLACK+DECKER
• Country of Origin: Vietnam

Warranty and Support

Warranty Information

For detailed warranty information regarding your BLACK+DECKER Dual Charger (BDDC201B), please refer to the warranty card included with your product or visit the official BLACK+DECKER website. Warranty terms and conditions may vary by region.

Customer Support

If you have any questions, require technical assistance, or need to report an issue with your charger, please contact BLACK+DECKER customer support. You can find contact information and additional resources on the official BLACK+DECKER website:

Visit the Official BLACK+DECKER Store