RUNNA Classic Twin-Over-Full Bunk Bed

RUNNA Classic Twin-Over-Full Bunk Bed with Storage Staircase Instruction Manual

Model: Classic Twin-Over-Full Bunk Bed

1. Important Safety Information

Please read and understand all instructions before assembling and using this bunk bed. Keep this manual for future reference.

  • Weight Capacity: The upper bed has a maximum weight capacity of 400 lbs. The bottom bed has a maximum weight capacity of 600 lbs. Do not exceed these limits.
  • Age Restriction: The upper bunk is not suitable for children under 6 years of age.
  • Mattress Thickness: For the upper bed, use a mattress with a thickness of 4-6 inches. For the bottom bed, use a mattress with a thickness of 6-8 inches. Ensure the mattress on the upper bunk is below the top edge of the guardrails.
  • Guardrails: Always use the guardrails on the upper bunk. Ensure they are securely fastened.
  • Ladder/Staircase: Use the provided ladder or staircase for entering and exiting the upper bunk. Do not use alternative methods.
  • Assembly: Ensure all connections are tight and secure before use. Periodically check and tighten hardware as needed.
  • Ventilation: Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed, for example, but not limited to, hooks, belts, and jump ropes.
  • Location: Place the bunk bed on a level surface. Avoid placing it near windows or cords where children could become entangled.

2. Setup and Assembly

This bunk bed requires assembly. All necessary tools are included with your purchase. It is recommended that two adults assemble this product.

2.1 Unpacking and Part Identification

  • Carefully unpack all components and hardware from the packaging.
  • Refer to the included assembly instruction guide to identify all parts and hardware. Do not discard packaging until assembly is complete and all parts are accounted for.

2.2 Assembly Steps

Follow the detailed, step-by-step instructions provided in the separate assembly guide included in your package. Ensure each step is completed accurately before proceeding to the next.

The ladder and staircase can be installed on either the left or right side of the bed, depending on your room layout.

Diagram showing the dimensions of the RUNNA Classic Twin-Over-Full Bunk Bed.

This diagram illustrates the overall dimensions of the bunk bed, including length, width, height, and specific measurements for the upper and lower beds, ladder, staircase, and drawers. All measurements are in inches.

RUNNA Classic Twin-Over-Full Bunk Bed in a bedroom setting, showing the gray finish, ladder, and storage staircase.

A view of the assembled RUNNA Classic Twin-Over-Full Bunk Bed in a bedroom. It features a gray finish, a ladder on the left, and a storage staircase with shelves on the right, along with three under-bed drawers.

3. Operating Instructions

The RUNNA Classic Bunk Bed is designed for versatile use and provides comfortable sleeping arrangements along with integrated storage.

3.1 Sleeping Arrangements

  • The upper bunk accommodates a twin-sized mattress.
  • The lower bunk accommodates a full-sized mattress.
  • Always ensure mattresses are properly sized and positioned within the bed frames.

3.2 Storage Features

  • Under-Bed Drawers: Three spacious drawers are located under the bottom bed, ideal for storing bedding, clothes, toys, or other personal items. Pull the knobs to open and push to close.
  • Staircase Shelves: The integrated staircase features shelves of varying sizes, providing convenient storage for books, decorative items, or small personal belongings.
  • Upper Bedside Rack: A small rack is located on the upper bedside, suitable for holding small objects like a phone or a book.
Close-up view of the RUNNA Classic Bunk Bed's storage features, including open drawers and staircase shelves.

A detailed view highlighting the storage capabilities of the bunk bed. It shows the three spacious drawers pulled out from under the lower bed and the integrated shelves within the staircase, designed for books or decorative items.

3.3 Separating the Beds

This bunk bed can be separated into two individual beds: one twin-sized bed and one full-sized bed. Refer to the assembly guide for instructions on how to safely disassemble the bunk bed configuration and reassemble it into two separate beds.

RUNNA Classic Bunk Bed separated into a twin bed and a full bed.

This image demonstrates the versatility of the bunk bed, showing it configured as two separate beds: a twin-sized bed and a full-sized bed, both with the gray finish and under-bed drawers.

4. Maintenance

Proper maintenance will ensure the longevity and safety of your RUNNA bunk bed.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
  • Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Tighten any loose hardware immediately to prevent instability and potential hazards.
  • Structural Integrity: Regularly check for any signs of wear, damage, or structural weakness. Do not use the bed if any part is broken or missing.

5. Troubleshooting

If you encounter any issues with your bunk bed, refer to the following common solutions.

  • Squeaking Noises: Squeaking can often be resolved by tightening all assembly hardware. Ensure the bed is on a level surface.
  • Loose Parts: If any parts feel loose, re-tighten the corresponding screws or bolts. Do not overtighten.
  • Missing Parts: If you discover any missing parts during assembly, do not proceed with assembly. Contact customer support immediately.
  • Difficulty with Drawers: Ensure the drawer slides are clean and free of obstructions. Check that the drawers are properly aligned on their tracks.

For issues not covered here, or if problems persist, please contact customer support.

6. Specifications

Product TypeBunk Bed
SizeTwin-Over-Full
ColorGray
Overall Product Dimension93.4"L x 59"W x 60.65"H
MaterialPlywood, MDF, Pinewood
Upper Bed Weight Capacity400 LBS
Bottom Bed Weight Capacity600 LBS
Recommended Upper Mattress Thickness4-6 inches
Recommended Bottom Mattress Thickness6-8 inches
Number of Slats (Upper/Bottom)14 / 14
Assembly RequiredYes
Country of OriginVietnam

7. Product Warranty

This RUNNA bunk bed comes with a one-year product warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

The warranty does not cover damage resulting from improper assembly, misuse, abuse, accidents, alterations, or normal wear and tear. Please retain your proof of purchase for warranty claims.

8. Customer Support

If you have any questions regarding assembly, missing parts, product quality issues, or require further assistance, please do not hesitate to contact our customer service representatives.

We are committed to providing a satisfactory solution and will respond to your inquiries within 24 hours.

Please refer to your purchase documentation or the retailer's website for specific contact information for RUNNA customer support.

Related Documents - Classic Twin-Over-Full Bunk Bed

Preview Alaine Twin Size Bunk Bed BW00443: Assembly & Safety Guide
Detailed assembly and installation instructions for the Alaine Twin Size Bunk Bed (Model BW00443). This wood bunk bed, suitable for Twin over Twin or Twin XL over Full configurations, features a built-in wardrobe, four drawers, and full-length guardrails, offering a space-saving solution. Includes comprehensive safety warnings and part lists.
Preview Assembly Instructions for L-Shaped Bunk Bed with Storage Drawers and Staircase - Models WF291898, WF291899, WF291900
Detailed assembly guide for the L-shaped bunk bed, including safety warnings, comprehensive part and hardware lists, and step-by-step instructions for models WF291898, WF291899, and WF291900. This manual ensures proper construction of the twin-over-full bunk bed with integrated storage drawers and staircase.
Preview Bunk Bed Assembly Instructions - FU291TCPC
Comprehensive assembly instructions for the FU291TCPC bunk bed, including safety warnings, part lists, hardware lists, and step-by-step assembly guides for various configurations.
Preview ModernLuxe Castle Style Bunk Bed Assembly Instructions
Comprehensive assembly guide for the ModernLuxe Castle Style Bunk Bed, including safety precautions, a detailed parts list, hardware identification, and step-by-step visual instructions translated into English. This manual provides all necessary information to safely assemble the bunk bed.
Preview 17 Stories BW00321 Bunk Bed Assembly Instructions
Comprehensive assembly instructions for the 17 Stories BW00321 bunk bed, including safety warnings, parts list, hardware list, and step-by-step guidance for assembly.
Preview Assembly Instructions for Full over Twin & Twin Bunk Bed with Slide and Storage Staircase - WF290964-WF290965-WF290966
Detailed assembly instructions, safety warnings, part lists, and hardware information for the GIGACLOUD TECHNOLOGY bunk bed. Includes step-by-step guidance for assembling the Full over Twin & Twin bunk bed with slide and storage staircase. Model numbers: WF290964, WF290965, WF290966.