1. Introduction
Thank you for choosing the BoxWave FineTouch Capacitive Stylus. This manual provides essential information for the proper setup, operation, and maintenance of your stylus. The FineTouch Capacitive Stylus is designed for precise interaction with capacitive touch screens, including devices like the Canon EOS R7.
Figure 1: BoxWave FineTouch Capacitive Stylus and a compatible device.
2. Product Overview
The BoxWave FineTouch Capacitive Stylus is a precision input device for capacitive touch screens. It features a clear disc tip for enhanced visibility and accuracy.
2.1 Key Features
- Clear Disc Tip: Provides vision-enhancing precision, allowing users to see exactly where the stylus is interacting with the screen.
- Universal Compatibility: Works with all capacitive touch screens, including the Canon EOS R7.
- No Bluetooth Required: Operates without pairing, functioning immediately upon contact with the screen.
- Integrated Clip: A built-in metal clip allows for convenient attachment to clothing or cases.
- Compact Design: Designed in a pen-like form factor for comfortable handling and portability.
Figure 2: Key features of the FineTouch Capacitive Stylus.
2.2 Components
The stylus consists of the following main components:
- Stylus Body: The main shaft of the stylus.
- Clear Disc Tip: The transparent, conductive tip for screen interaction.
- Protective Cap: Covers the clear disc tip when not in use.
- Metal Clip: For securing the stylus.
Figure 3: Stylus tip with protective cap removed.
Figure 4: Threaded cap for tip protection.
3. Setup
The BoxWave FineTouch Capacitive Stylus requires no complex setup or pairing. It is ready for use immediately out of the packaging.
- Unpack: Carefully remove the stylus from its packaging.
- Remove Cap: Gently unscrew or pull off the protective cap from the stylus tip.
- Ready for Use: The stylus is now ready to interact with your capacitive touch screen device.
Note: The FineTouch Capacitive Stylus does not require batteries, Bluetooth pairing, or any software installation. It does not support palm rejection or pressure sensitivity.
4. Operating Instructions
Using the BoxWave FineTouch Capacitive Stylus is intuitive and similar to using your finger, but with enhanced precision.
- Hold the Stylus: Hold the stylus as you would a regular pen or pencil for comfortable control.
- Interact with Screen: Gently touch the clear disc tip to the capacitive touch screen of your device. The clear disc allows you to see the exact point of contact.
- Perform Actions: Use the stylus to tap, swipe, draw, or write on your screen as needed. The stylus simulates the touch of your finger.
Figure 5: Using the stylus for screen interaction.
Figure 6: The clear disc tip provides precise contact.
5. Maintenance
Proper care will ensure the longevity and optimal performance of your stylus.
- Cleaning: Wipe the stylus body and tip with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Storage: Always replace the protective cap over the clear disc tip when the stylus is not in use to prevent damage. Store the stylus in a clean, dry place.
- Handling: Avoid dropping the stylus or applying excessive force to the tip, as this may damage the clear disc.
6. Troubleshooting
If you encounter issues with your BoxWave FineTouch Capacitive Stylus, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stylus not responding | Protective cap still on, damaged tip, or screen protector interference. | Ensure the cap is removed. Inspect the clear disc tip for damage. Test on a different capacitive screen or remove any thick screen protectors. |
| Inaccurate input | Dirty screen or tip, damaged tip. | Clean the device screen and the stylus tip with a soft cloth. Ensure the clear disc tip is intact and not bent. |
| Stylus feels sticky or drags | Dirty screen or tip. | Clean both the device screen and the stylus tip thoroughly. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | FineTouch Capacitive Stylus |
| Brand | BoxWave |
| Compatibility | All capacitive touch screens, including Canon EOS R7 |
| Tip Type | Clear Disc Tip |
| Power Source | Passive (no batteries required) |
| Special Features | Integrated metal clip, lightweight design |
| Item Weight | 1 ounce |
| ASIN | B0BVNVDSYY |
8. Warranty and Support
BoxWave products are designed for quality and reliability. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official BoxWave website.
For technical support or further assistance, please contact BoxWave customer service. Limited third-party technical support for your device (up to 3 inquiries via messaging) is included, as noted in the product description.
Disclaimer: BoxWave is not affiliated with or endorsed by Canon.
