1. Introduction
Thank you for choosing the MOKPR 15W Wireless Car Charger. This device is designed to provide fast and convenient wireless charging for your smartphone while driving, featuring an auto-clamping mechanism and versatile mounting options. Please read this manual carefully before use to ensure proper installation and operation.
2. Package Contents
- MOKPR 15W Wireless Car Charger
- USB Type-C Cable
- Dashboard/Windshield Suction Cup Mount
- Air Vent Clip Mount
- User Manual
3. Product Overview
The MOKPR wireless car charger features a 15W fast charging capability, an intelligent auto-clamping system, and multiple installation methods to suit your vehicle's interior.
Image: The MOKPR 15W Wireless Car Charger displaying its fast charging capabilities for various phone brands, including 7.5W for iPhone, 10W for Samsung, and up to 15W for LG/Google devices. A note indicates the need for a QC 3.0 car charger (not included) for optimal performance.
Key Features:
- 15W Fast Wireless Charging: Equipped with an upgraded MOKPR chip for intelligent and safe charging. Maximum input power is 7.5W for iPhone, up to 10W for Samsung and other Android phones, and up to 15W for LG V50 and similar devices. A QC 3.0 car charger (not included) is recommended for best performance.
- 3-in-1 Mounting Design: Supports installation on the dashboard, windshield, or air vent. The reusable suction cup base is waterproof and can be cleaned with warm water.
- Automatic and Intelligent Clamping: Simply touch the buttons on either side to open the arms. Once a phone is placed, the arms automatically close to secure it and initiate wireless charging. Features Foreign Object Detection (FOD) for safety. An integrated super capacitor allows the arms to open 1-3 times after power loss for easy phone retrieval.
- Adjustable Viewing Angle: A 360° rotating ball joint and a telescopic arm (9 cm to 14.3 cm) allow for optimal phone positioning in both portrait and landscape modes.
- Case Friendly: Charges through phone cases up to 4mm thick. Note: Metal cases, magnets, credit cards, ring holders, and pop sockets may interfere with charging.
- Stable Hold: Features anti-slip rubber pads, a sturdy support frame, and strong anti-scratch claws to ensure a secure grip, even on bumpy roads or during sudden braking.
Image: The MOKPR Wireless Car Charger securely holding a phone on a dashboard, illustrating its stability during various driving conditions such as deceleration zones, sudden braking, and rugged mountain roads.
4. Setup and Installation
Choose your preferred mounting method:
4.1 Dashboard/Windshield Mount
- Clean the desired surface (dashboard or windshield) thoroughly to ensure it is free of dust and grease.
- Attach the suction cup mount to the charger unit.
- Press the suction cup firmly against the clean surface and push down the lock lever to secure it.
- Adjust the telescopic arm and ball joint to your desired viewing angle.
Image: A detailed view of the MOKPR wireless car charger's super power suction cup, highlighting its secure lock button and reusability after washing. The image also shows the adjustable arm and ball joint for flexible positioning.
Image: Visual representation of the three available mounting options for the MOKPR wireless car charger: dashboard, windshield, and air vent. Each option shows the charger mount combined with its respective attachment (suction cup or clip).
4.2 Air Vent Mount
- Attach the air vent clip mount to the charger unit.
- Carefully insert the clip into a suitable air vent slat in your vehicle. Ensure it is securely fastened.
- Adjust the ball joint to your desired viewing angle.
4.3 Power Connection
- Connect the provided USB Type-C cable to the charging port on the bottom of the car charger.
- Plug the other end of the USB cable into a QC 3.0 car charger (not included) for optimal fast charging performance.
5. Operating Instructions
5.1 Placing Your Phone
- Ensure the car charger is powered on. The arms will automatically open slightly, or you can touch the sensor buttons on the sides to open them fully.
- Place your smartphone into the holder. The arms will automatically close to secure your phone and begin wireless charging.
Image: Illustration of the MOKPR wireless car charger's intelligent auto-clamping feature. It shows the arms automatically opening upon power-on (one-touch release) and automatically closing to secure the phone once placed, initiating charging.
5.2 Removing Your Phone
- To remove your phone, simply touch one of the sensor buttons located on the sides of the charger. The arms will open automatically.
- In case of power loss, the built-in super capacitor allows the arms to open 1-3 times, enabling you to retrieve your phone easily.
5.3 Important Notes for Charging
- For optimal charging, ensure your phone is centered on the charging pad.
- Remove any metal objects, magnets, credit cards, ring holders, or thick cases (over 4mm) from your phone before placing it on the charger, as these can interfere with wireless charging.
- The charger supports Qi wireless charging standard.
Image: An illustration demonstrating the MOKPR wireless car charger's compatibility with phone cases up to 4mm thick. It also clearly indicates items that are incompatible with wireless charging, such as ring holders, ring clasps, wallet cases, and ultra-thick cases.
6. Maintenance
- Cleaning: Wipe the charger and mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Suction Cup: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. This will restore its adhesive properties.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on. | No power connection or faulty cable/adapter. | Ensure the USB Type-C cable is securely connected to both the charger and a working QC 3.0 car adapter. Try a different cable or adapter. |
| Phone not charging wirelessly. | Phone not aligned, incompatible case, foreign object, or phone not Qi-compatible. |
|
| Slow charging. | Not using a QC 3.0 car charger or phone's maximum input is lower. |
|
| Suction cup not sticking. | Dirty surface or suction cup. | Clean the dashboard/windshield surface and rinse the suction cup with warm water, then air dry. Ensure the surface is flat and non-porous. |
| Arms not opening/closing automatically. | No power or sensor obstruction. | Ensure the charger is powered. Check for any obstructions around the sensor buttons. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | MOKPR |
| Model Number | 023 (JR-ZS219) |
| ASIN | B0BVBBVBWC |
| UPC | 633690448175 |
| Wireless Charging Standard | Qi |
| Wattage | 15 Watts (Max) |
| Input Voltage | 15 Volts |
| Input Amperage | 3 A |
| Output Voltage | 9 Volts |
| Output Current | 2 A |
| Connector Type | USB Type C |
| Power Source | Corded Electric |
| Compatible Devices | Mobile Phones (iPhone, Samsung, LG, etc.) |
| Mounting Type | Dashboard, Windshield, Air Vent |
| Color | Black |
| Material | Plastic |
| Special Features | Wireless Charging, Auto-Clamping, Adjustable Viewing Angle |
9. Warranty and Support
MOKPR is committed to providing high-quality products and excellent customer service.
- Lifetime Warranty: This product is covered by a lifetime warranty.
- Professional Support: We offer 24/7 professional support to assist you with any questions or issues.
- For assistance, please contact our customer service team. Refer to the contact information provided with your product packaging or visit the official MOKPR website.
