HANNLOMAX HX-132CR Alarm Clock Radio User Manual

Introduction

Thank you for purchasing the HANNLOMAX HX-132CR Alarm Clock Radio. This device combines a digital alarm clock, PLL FM radio, and convenient charging solutions for your mobile devices and smartwatches. Please read this manual carefully before use to ensure proper operation and to maximize your experience.

Safety Information

• Do not expose the unit to rain or moisture to prevent fire or shock hazards.
• Ensure the power adapter is compatible with your local power supply.
• Do not disassemble the unit. Refer all servicing to qualified personnel.
• Keep the unit away from direct sunlight, heat sources, and excessive dust.
• Place the unit on a stable, flat surface.

Product Features

• PLL FM Radio with 20 Preset Stations
• Digital Clock with Dual Alarms (Buzzer or Radio Wake-up)
• Dual USB Charging Ports: 1x USB Type-A (5V~1A) and 1x USB Type-C (5V~1A)
• Integrated Smartwatch Charging Holder (compatible with Apple and Samsung smartwatches)
• Adjustable Display Brightness

Package Contents

• HANNLOMAX HX-132CR Alarm Clock Radio
• AC Power Adapter
• User Manual

Product Overview

Front Panel Controls and Display

Image: Front view of the HANNLOMAX HX-132CR with a smartwatch in the charging holder.

1. AL1 / VOL- Button: Adjusts Alarm 1, decreases volume.
2. AL2 / VOL+ Button: Adjusts Alarm 2, increases volume.
3. ▶/▌ / AL. RESET / CLK. Button: Power On/Off, Alarm Reset, Clock Set.
4. PRESET / DIM. Button: Radio Preset, Display Dimmer.
5. NIGHT LIGHT Button: Activates/Deactivates Night Light.
6. ▶▶ / HR. Button: Tune Up / Next Track, Hour Adjustment.
7. SNOOZE / SLEEP Button: Snooze, Sleep Timer.
8. ◀◀ / MIN. Button: Tune Down / Previous Track, Minute Adjustment.
9. Digital LED Display: Shows time, alarm status, radio frequency.
10. Smartwatch Charging Holder: Integrated holder for smartwatch charging cable.

Rear Panel Connections

Image: Rear view of the HANNLOMAX HX-132CR showing power and USB ports.

11. DC-in Jack: For connecting the AC power adapter.
12. USB Type-C Port: For charging external devices (5V~1A).
13. USB Type-A Port: For charging external devices (5V~1A).
14. Battery Compartment: For backup batteries (not included).
15. Speaker: For audio output.

Setup

Power Connection

1. Insert the DC plug of the supplied AC power adapter into the DC-in Jack on the rear of the unit.
2. Plug the AC adapter into a standard wall outlet. The unit will power on and the display will light up.

Battery Backup (Optional)

For time and alarm settings backup during a power outage, install 2 x AAA batteries (not included) into the battery compartment on the rear of the unit. Ensure correct polarity (+/-).

Smartwatch Charging Holder Setup

Image: Smartwatch charging holder with Apple and Samsung watches.

1. Open the drawer-type smartwatch charging holder located on the side of the unit.
2. Carefully route your smartwatch's charging cable (not included) through the designated channels within the holder.
3. Secure the charging puck in the holder's recess.
4. Connect the USB end of your smartwatch charging cable to either the USB Type-A or USB Type-C port on the rear of the alarm clock.
5. Place your smartwatch onto the charging puck in the holder.

Operation

Setting the Clock Time

1. In standby mode, press and hold the ▶/▌ / AL. RESET / CLK. button until the hour digits flash.
2. Press the ▶▶ / HR. button to adjust the hour.
3. Press the ◀◀ / MIN. button to adjust the minute.
4. Press the ▶/▌ / AL. RESET / CLK. button again to confirm and exit time setting mode.

Setting Alarms (Alarm 1 and Alarm 2)

The unit features two independent alarms.

1. To Set Alarm 1: Press and hold the AL1 / VOL- button until the alarm hour digits flash.
2. Use the ▶▶ / HR. and ◀◀ / MIN. buttons to set the desired alarm time.
3. Press AL1 / VOL- again to select the alarm source (Buzzer or Radio). The corresponding indicator (Buzzer AL1 or Radio AL1) will light up.
4. Press AL1 / VOL- once more to confirm and activate Alarm 1.
5. To Set Alarm 2: Follow the same steps using the AL2 / VOL+ button.

FM Radio Operation

1. Power On/Off: Press the ▶/▌ / AL. RESET / CLK. button to turn the radio on or off.
2. Manual Tuning: In radio mode, press the ▶▶ / HR. or ◀◀ / MIN. buttons briefly to fine-tune the frequency.
3. Auto Scan: Press and hold the ▶▶ / HR. or ◀◀ / MIN. buttons to automatically scan for the next available station.
4. Volume Adjustment: Use the AL1 / VOL- and AL2 / VOL+ buttons.
5. Setting Presets (20 stations):
   • Tune to your desired station.
   • Press and hold the PRESET / DIM. button until "P01" flashes.
   • Use the ▶▶ / HR. or ◀◀ / MIN. buttons to select a preset number (P01-P20).
   • Press PRESET / DIM. again to save the station.
6. Recalling Presets: Briefly press the PRESET / DIM. button to cycle through saved stations.

USB Charging

The unit provides two USB ports for charging external devices:

• USB Type-A Port: 5V, 1A output.
• USB Type-C Port: 5V, 1A output.

Connect your device's USB charging cable (not included) to the appropriate port on the rear of the alarm clock. Charging will begin automatically.

Display Dimmer

Press the PRESET / DIM. button repeatedly to adjust the brightness of the LED display to your preference.

Night Light

Press the NIGHT LIGHT button to turn the integrated night light on or off.

Snooze Function

When an alarm sounds, press the SNOOZE / SLEEP button to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period.

Sleep Timer

While the radio is playing, press the SNOOZE / SLEEP button repeatedly to set a sleep timer (e.g., 10, 20, 30, 60, 90 minutes). The radio will automatically turn off after the selected time.

Maintenance

• Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: If using battery backup, replace batteries annually or when the unit experiences frequent power outages.
• Storage: If storing the unit for an extended period, disconnect it from power and remove backup batteries.

Troubleshooting

Specifications

• Model: HX-132CR
• Power Input: DC (via AC adapter)
• Battery Backup: 2 x AAA batteries (not included)
• FM Frequency Range: Standard FM range (e.g., 87.5 - 108 MHz)
• USB Type-A Output: 5V, 1A
• USB Type-C Output: 5V, 1A
• Dimensions (W x H x D): 13.5 cm x 10.8 cm x 6.5 cm (excluding smartwatch holder)
• Weight: 260 Grams
• Material: Plastic

Image: Unit dimensions diagram.

Warranty and Support

HANNLOMAX products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official HANNLOMAX website. Please retain your proof of purchase for warranty claims.