1. Introduction
Thank you for choosing the Ledvion 10x LED Batten T8 Tube. This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
Always adhere to the following safety guidelines to prevent injury or damage:
- Electrical Safety: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or cleaning.
- Voltage: Verify that the supply voltage matches the voltage specified on the product label (230 Volts).
- Handling: Handle the LED battens with care to avoid damage. Do not bend or twist the fixture excessively.
- Environment: These fixtures are designed for indoor use in dry locations. Do not expose to water or high humidity unless specifically rated for such conditions.
- Heat: Although LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixture. Do not cover the fixture with insulating material.
- Disposal: Dispose of the product and its components responsibly, following local waste disposal regulations for electronic waste.
3. Package Contents
The Ledvion 10x LED Batten T8 Tube package (Model LV40003-10pack) includes the following items:
An organized display of the package contents: 10 LED battens, 20 easy connectors, 20 clips, 20 screws, 20 plugs, and 1 manual.
- 10x LED Batten T8 Tubes (150cm, 40W, 4000K)
- 20x Easy Connectors
- 20x Mounting Clips
- 20x Screws
- 20x Wall Plugs
- 1x Instruction Manual
4. Product Overview
The Ledvion LED Batten T8 Tube is an energy-efficient lighting solution designed for various applications, including garages, workshops, and retail spaces. It features an ultra-slim profile and integrated LED technology for optimal performance.
A set of ten Ledvion LED Batten T8 Tubes, each 150cm long, designed for efficient lighting.
Key Features:
- Integrated LED System: The light source is built directly into the fixture, ensuring a sleek design and easy installation.
- High-Quality LED Chips: Equipped with advanced Samsung LED chips for exceptional brightness and durability, offering a long lifespan of 30,000 hours.
- Energy Efficiency: With a power consumption of 40W and a light output of 5600 lumens, it achieves 140 lumens per Watt, contributing to significant energy savings.
- Flicker-Free: Provides consistent and comfortable illumination without noticeable flicker.
- Ultra-Slim Design: Features an ultra-thin height of only 2.4 cm (25mm), allowing for discreet installation.
- Neutral White Light: Emits a 4000K color temperature, providing a balanced and clear light suitable for various environments.
Detail shot emphasizing the high-performance Samsung LED chips within the Ledvion LED Batten, along with a 'Warranty 5 Years' label.
A view of the ultra-thin design (25mm height) of the Ledvion LED Batten, noting available wattages (15/30/40W), color temperatures (4000/6500K), and a 120-degree beam angle.
5. Setup and Installation
Follow these steps for proper installation of the LED Batten T8 Tube:
- Safety First: Before starting any installation, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Marking: Determine the desired mounting location for the LED batten. Use the batten itself or measure the distance between the mounting holes to mark the drilling points on the ceiling or wall.
- Drilling: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
- Mounting Clips: Secure the mounting clips to the wall or ceiling using the provided screws. Ensure the clips are firmly attached.
- Wiring: Connect the electrical wires to the easy connector. The easy connector allows for a toolless setup. Ensure correct polarity (Live, Neutral, Earth) according to local wiring standards.
A quick connector device, indicating toolless setup for easy installation of the LED Batten to the main power supply.
- Attach Batten: Carefully align the LED batten with the mounted clips and snap it into place. Ensure it is securely fastened.
- Power On: Once the batten is securely installed and wired, restore power to the circuit.
- Testing: Turn on the light switch to verify proper operation.
Illustration of two Ledvion LED Batten T8 Tubes installed in a garage, providing bright and uniform illumination.
An example of Ledvion LED Batten T8 Tubes used as overhead lighting in a modern retail store setting.
6. Operating Instructions
The Ledvion LED Batten T8 Tube operates via a standard wall switch connected to its power supply. Simply toggle the switch to turn the light fixture on or off.
7. Maintenance
Minimal maintenance is required for the Ledvion LED Batten T8 Tube:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
- No User-Serviceable Parts: The LED light source is integrated and not designed to be replaced by the user. Attempting to open or modify the fixture will void the warranty.
8. Troubleshooting
If you encounter issues with your Ledvion LED Batten, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty switch | Check circuit breaker and wall switch. Ensure power is restored. Verify all wiring connections are secure (with power off). Test the switch with another device or consult an electrician. |
| Light is dim or flickers | Incorrect voltage Loose connection Product defect | Confirm supply voltage matches product specifications. Check wiring connections (with power off). If issues persist, contact customer support. |
| Physical damage | Impact during installation or use | Do not attempt to repair. Disconnect power and replace the damaged unit. |
If the problem cannot be resolved using the above steps, please contact Ledvion customer support.
9. Specifications
Detailed technical specifications for the Ledvion LED Batten T8 Tube (Model LV40003-10pack):
A diagram illustrating the physical dimensions of the 1500mm long Ledvion LED Batten, including its 71mm width.
| Feature | Specification |
|---|---|
| Brand | Ledvion |
| Model Number | LV40003-10pack |
| Dimensions (L x W x H) | 153 x 30 x 15 cm (individual batten: 1500mm x 71mm x 25mm) |
| Weight (per item) | Approx. 0.64 kg (6.4 kg for 10-pack) |
| Power Consumption | 40 Watts |
| Luminous Flux | 5600 lumens |
| Luminous Efficacy | 140 lumens/Watt |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Average Lifespan | 30,000 Hours |
| Voltage | 230 Volts |
| Material | Plastic |
| Beam Angle | 120 degrees |
| Energy Efficiency Class | E |
| Energy Consumption | 40 kWh/1000h |
| Country of Origin | China |
The EU energy label for the Ledvion LV40003 LED Batten, indicating an energy efficiency class of E and 40 kWh/1000h consumption. For more details, visit the EPREL database.
10. Warranty and Support
Ledvion provides a 5-year warranty for this product, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Ledvion customer support through your retailer or the official Ledvion website.
