1. Product Overview
The CareSens N Blood Glucose Test Strips are designed for quantitative measurement of glucose in fresh capillary whole blood samples. These strips are intended for self-testing by individuals with diabetes and for use by healthcare professionals as an aid in monitoring the effectiveness of diabetes management.
Each test strip requires a small blood sample of 0.5 µL and provides results in 5 seconds. The strips utilize advanced technology to detect, analyze, and correct variables in each blood sample, ensuring reliable readings.
Image 1.1: CareSens N Blood Glucose Test Strips packaging, showing the box and two vials of 50 strips each.
Compatibility
These test strips are exclusively compatible with the following CareSens N family blood glucose meters:
- CareSens N Blood Glucose Monitoring System
- CareSens N Feliz Blood Glucose Monitoring System
- CareSens N PLUS BT Blood Glucose Monitoring System
Do not use these test strips with any other brand or model of blood glucose meter.
Image 1.2: CareSens N Meter
Image 1.3: CareSens N Feliz Meter
Image 1.4: CareSens N PLUS BT Meter
2. Setup and Preparation
Before You Begin
- Ensure you have a compatible CareSens N family blood glucose meter.
- Check the expiration date on the test strip vial. Do not use expired strips.
- Wash and dry your hands thoroughly before handling the test strips and performing a test.
- Gather all necessary supplies: blood glucose meter, test strip vial, lancing device, and lancets.
Inserting a Test Strip
- Remove one test strip from the vial. Immediately close the vial cap tightly to protect the remaining strips from moisture.
- Insert the test strip into the test strip port of your CareSens N family meter. The meter will automatically turn on.
- The meter display will show a blood drop symbol, indicating it is ready for a blood sample.
Note: CareSens N test strips are 'No Coding' strips, meaning no manual coding is required for the meter, simplifying the testing process.
Image 2.1: A CareSens N meter with a test strip correctly inserted into the port.
3. Operating Instructions
Performing a Blood Glucose Test
- Prepare your lancing device according to its instructions.
- Puncture the side of your fingertip to obtain a blood drop.
- Touch the tip of the test strip to the blood drop. The blood will be automatically drawn into the strip. Ensure the blood sample completely fills the reaction area of the strip. Do not apply blood to the top of the strip.
- The meter will begin counting down from 5 seconds.
- After the countdown, your blood glucose result will appear on the meter display.
- Record your result if necessary, then remove and dispose of the used test strip and lancet safely in a sharps container.
Image 3.1: A close-up view of a CareSens N meter displaying a blood glucose reading after a test.
4. Maintenance and Storage
Test Strip Storage
- Store test strips in their original vial with the cap tightly closed.
- Keep the vial in a cool, dry place, away from direct sunlight and heat. Do not refrigerate.
- Do not transfer test strips to any other container.
- Use test strips within the expiration date printed on the vial. Once the vial is opened, use the strips within the period specified in your meter's user manual (typically 3-6 months). Write the discard date on the vial when first opened.
Disposal
Dispose of used test strips and lancets in an appropriate sharps container to prevent accidental needle sticks or injury. Follow local regulations for proper disposal of medical waste.
5. Troubleshooting
If you encounter issues during testing, refer to your meter's user manual for specific error codes and troubleshooting steps. Common issues related to test strips include:
- "ERROR!!" Message: This can occur if the blood sample is insufficient, the strip is not inserted correctly, or the strip is damaged or expired. Ensure you apply enough blood, the strip is fully inserted, and check the expiration date.
- Inaccurate Readings: This may be due to expired strips, improper storage, contamination, or incorrect testing technique. Always ensure strips are stored correctly and used within their validity period.
- Meter Not Turning On: Ensure the test strip is inserted correctly and the meter's batteries are functional.
If problems persist, contact CareSens customer service or your healthcare provider.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | CareSens N Blood Glucose Test Strips |
| Brand | CareSens |
| Model Compatibility | CareSens N, CareSens N Feliz, CareSens N PLUS BT meters |
| Sample Volume | 0.5 µL |
| Test Time | 5 seconds |
| Coding | No Coding required |
| Number of Pieces (per pack) | 100 |
| Special Feature | Self Test |
| Specific Uses | Blood Glucose Test |
| Product Dimensions | 3.25 x 1.38 x 2.5 inches |
| Product Weight | 1.76 ounces |
| Manufacturer | i-SENS |
7. Warranty Information
For detailed warranty information regarding CareSens N Blood Glucose Test Strips, please refer to the documentation included with your purchase or contact the manufacturer directly. Warranty terms typically cover manufacturing defects.
8. Support and Contact
If you have questions or require assistance with your CareSens N Blood Glucose Test Strips or compatible meter, please contact CareSens Customer Service.
- Customer Service Hours: 9 AM - 5 PM PST
- Manufacturer: i-SENS
- Online Resources: Visit the official CareSens website or the i-SENS USA Store on Amazon for additional product information and support.