Hot Wheels Mazda 787B Retro Racers 4/10 Instruction Manual

Introduction

This manual provides essential information for the Hot Wheels Mazda 787B, part of the Retro Racers 4/10 series. This 1:64 scale die-cast model is designed for collectors and enthusiasts, offering a detailed replica of the iconic race car.

Image: Hot Wheels Mazda 787B Retro Racers 4/10 in its original blister packaging, showcasing the car and series details.

Setup

The Hot Wheels Mazda 787B comes pre-assembled in its packaging. To set up your model car for display or play, carefully remove it from the blister pack. No additional assembly is required.

1. Locate the perforated edges or opening tab on the packaging.
2. Carefully tear or cut along the designated lines to open the blister pack.
3. Gently slide the Mazda 787B model car out of its plastic tray.
4. Dispose of packaging materials responsibly according to local recycling guidelines.

Operating Instructions

This Hot Wheels model is a static or free-rolling die-cast car. It is designed for imaginative play or display. Simply place the car on a flat, clean surface and push it to roll. No batteries or complex controls are involved.

• Ensure the play surface is smooth and free of obstacles to allow for optimal rolling.
• Avoid excessive force when pushing the car to prevent damage to the wheels or axles.
• For display, place the car on a stable surface where it will not be easily knocked over.

Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe the car and remove dust. Avoid abrasive cleaners or harsh chemicals, as these can damage the paint and decals.
• Storage: Store the model in a cool, dry place away from direct sunlight to prevent fading or material degradation.
• Handling: Handle the car with care to avoid scratching the paint or bending small parts like the spoiler.

Troubleshooting

As a simple die-cast model, the Hot Wheels Mazda 787B typically requires minimal troubleshooting. If the wheels do not roll smoothly, check for any debris or obstructions. Ensure the car is used on clean, flat surfaces.

• Wheels not rolling: Inspect the axles and wheels for any trapped lint, hair, or small particles. Gently remove any obstructions.
• Scratches or paint chips: These are typically cosmetic and do not affect the car's function. Avoid rough play or contact with abrasive surfaces to minimize such damage.

Specifications

Safety Information

Image: Back of the Hot Wheels Mazda 787B packaging, detailing safety warnings, warranty, and manufacturer information.

WARNING: Not suitable for children under 36 months. Small parts may be generated.

This product conforms to the safety requirements of ASTM F963.

Limited Lifetime Warranty

Mattel, Inc. warrants that any Hot Wheels Basic 1:64 scale car purchased in a single pack after January 1, 2013, will be free from defects in material or workmanship for the original purchaser's lifetime. If defective, contact Mattel to make a claim. Mattel, in its sole discretion, may require proof of the product defect. Mattel will replace any defective car with a replacement car chosen in Mattel's sole discretion or with a voucher for a new Hot Wheels Basic 1:64 scale single-pack car. This warranty does not cover damage resulting from accident, misuse, or abuse. This warranty is VALID ONLY IN THE U.S.A. and gives you specific legal rights, and you may also have other rights which vary from state to state.

Customer Support

For assistance, please visit service.mattel.com or call 1-800-524-8697 (US and Canada only).

Recycling Information

Please dispose of packaging materials responsibly. The packaging includes:

• Paper Card
• Plastic Tray

Check local recycling guidelines for proper disposal. More information can be found at how2recycle.info.