Introduction
Thank you for choosing the EBELLO Manual Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions thoroughly before use and retain them for future reference.
Image: The EBELLO Manual Recliner Chair, brown faux leather, fully assembled in a living room.
Important Safety Instructions
- Maximum Weight Capacity: This recliner is designed to support a maximum weight of 350 pounds (158 kg). Do not exceed this limit to prevent damage or injury.
- Keep hands and feet clear of the reclining mechanism during operation.
- Ensure the chair is placed on a level surface to maintain stability.
- Do not allow children to play on or around the recliner unsupervised.
- Avoid standing on the recliner or using it as a step stool.
Package Contents
Before assembly, verify that all components are present:
- Recliner Backrest (1)
- Recliner Seat Base with Armrests (1)
- Assembly Hardware (e.g., bolts, washers, Allen wrench - typically pre-attached or in a small bag)
If any parts are missing or damaged, please contact customer support.
Assembly Instructions
Assembly of the EBELLO Manual Recliner Chair is designed to be straightforward and typically takes less than 15 minutes. No additional tools are usually required.
- Unpack Components: Carefully remove all parts from the shipping box. Place them on a soft, clean surface to prevent scratches.
- Attach Backrest: Align the metal grooves on the backrest with the corresponding brackets on the seat base. Slide the backrest down firmly until it clicks securely into place. Ensure both sides are fully engaged.
- Verify Connection: Gently push and pull on the backrest to confirm it is securely attached and does not wobble.
Image: A close-up view of the recliner's internal metal frame and footrest mechanism, illustrating the robust construction.
Operating Instructions
The EBELLO Manual Recliner Chair offers a simple and comfortable reclining experience.
Reclining Function
- Engage Footrest: Locate the latch on the side of the recliner (typically on the right side). Pull the latch to release the footrest. The footrest will extend automatically.
- Recline Backrest: Once the footrest is extended, lean back into the chair with gentle pressure. The backrest will recline smoothly to your desired angle. The chair supports multiple reclining positions, from approximately 90 degrees to 160 degrees.
- Return to Upright Position: To return to the upright position, push your body forward while simultaneously pushing the footrest down with your legs until it locks into place. The backrest will return to its original position.
Image: An illustration demonstrating the adjustable angles of the recliner, suitable for reading, watching TV, and napping, ranging from 90 to 160 degrees.
Hidden Cup Holders
This recliner features two concealed cup holders for convenience.
- To access a cup holder, gently lift the armrest cover on either side of the chair.
- Place your beverage securely in the holder.
- To conceal, simply lower the armrest cover back into place.
Image: A visual representation of the recliner's hidden cup holder, integrated into the armrest for discreet storage.
Care and Maintenance
Proper care will extend the life and appearance of your recliner.
- Cleaning: For general cleaning, wipe the faux leather surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading and material degradation.
- Inspection: Periodically check all connections and hardware to ensure they remain tight. Tighten if necessary.
Image: A detailed close-up of the brown faux leather material, highlighting its texture and finish.
Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not recline smoothly. | Mechanism obstruction or loose connections. | Check for any objects obstructing the mechanism. Ensure all assembly connections are tight. |
| Footrest does not extend or retract. | Latch not fully engaged or mechanism stuck. | Ensure the side latch is pulled completely. Check for any foreign objects preventing movement. |
| Chair feels unstable or wobbly. | Loose assembly bolts or uneven floor. | Verify all assembly bolts are tightened. Ensure the chair is on a flat, even surface. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | EBELLO |
| Model Name | RR5064AF51D |
| Color | Brown |
| Product Dimensions (Upright) | 37"D x 37"W x 41"H (94cm D x 94cm W x 104cm H) |
| Seat Dimensions | 22"L x 24"W x 16"H (56cm L x 61cm W x 41cm H) |
| Maximum Weight Recommendation | 350 Pounds (158 kg) |
| Material | Faux Leather, Foam Fill |
| Frame Material | Solid Metal Frame |
| Special Features | Arm Rest, Hidden Cup Holders, Foot Rest |
| Reclining Position Count | 2 (Upright, Reclined) |
| Item Weight | 92.6 pounds (42 kg) |
Image: A technical diagram illustrating the various dimensions of the recliner chair, including height, width, depth, and seat measurements.
Warranty and Support
Warranty Information
This EBELLO recliner chair comes with a 1-year guarantee from the date of purchase, covering manufacturing defects. This warranty does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For any questions, concerns, or assistance with your product, please contact EBELLO customer support. Our team is available to provide support and resolve any issues you may encounter.
Please refer to your purchase documentation or the EBELLO brand store for specific contact details.
Note: Keep your proof of purchase for warranty claims.