Introduction
Welcome to the user manual for your new Reboot M2 True Wireless Stereo (TWS) Earbuds. These earbuds are designed to provide a superior audio experience with crystal clear sound, powerful bass, and seamless connectivity. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your device to ensure optimal performance.
What's in the Box
Please check the contents of your package. If any items are missing or damaged, please contact customer support.
- Reboot M2 Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- User Manual
Product Overview
Familiarize yourself with the components of your Reboot M2 TWS Earbuds.
Figure 1: Reboot M2 TWS Earbuds in their open charging case, showcasing the sleek white design.
Figure 2: A close-up view of a single Reboot M2 earbud, highlighting its comfortable and super lightweight design for extended wear.
Figure 3: Diagram illustrating the seamless Bluetooth 5.0 connectivity, IPX4 sweat resistance, and smooth touch control features of the Reboot M2 earbuds.
Figure 4: Image emphasizing the Super Bass Sound Effect and the 10mm Drivers that deliver Reboot Signature Sound.
Setup
1. Initial Charging
Before first use, fully charge the earbuds and the charging case.
- Place both earbuds into the charging case.
- Connect the USB charging cable to the charging port on the case and plug the other end into a USB power adapter (not included) or a computer's USB port.
- The indicator lights on the case will show charging status. Ensure the case is fully charged before first use.
- Charging Time: Approximately 20 minutes for earbuds, 1 hour for the case.
2. Bluetooth Pairing
Pair your Reboot M2 earbuds with your device (smartphone, tablet, etc.) for the first time.
- Ensure the earbuds are charged and placed inside the charging case.
- Open the charging case lid. The earbuds will automatically enter pairing mode, indicated by a flashing light on one of the earbuds.
- On your device, go to Bluetooth settings and turn Bluetooth ON.
- Search for available devices and select "Reboot M2" from the list.
- Once connected, the earbud indicator light will stop flashing, and your device will confirm the connection.
- The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
Operating Instructions
Power On/Off
- Power On: Open the charging case lid, and the earbuds will automatically power on. Alternatively, long-press the touch control area on both earbuds for 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging. Alternatively, long-press the touch control area on both earbuds for 5 seconds.
Music Playback (Touch Control)
- Play/Pause: Single tap on either the Left (L) or Right (R) earbud.
- Next Track: Double tap on the Right (R) earbud.
- Previous Track: Double tap on the Left (L) earbud.
- Volume Up: Triple tap on the Right (R) earbud.
- Volume Down: Triple tap on the Left (L) earbud.
Call Management (Touch Control)
- Answer/End Call: Single tap on either the Left (L) or Right (R) earbud.
- Reject Call: Long press on either the Left (L) or Right (R) earbud for 2 seconds.
Voice Assistant
- Activate Voice Assistant (Siri/Google Assistant): Long press on either the Left (L) or Right (R) earbud for 3 seconds.
Charging
The Reboot M2 earbuds and their charging case are designed for convenient power management.
Figure 5: Diagram illustrating the total playback time of 24 hours (4 hours per charge + 20 hours with case) and fast charging capabilities: 10 minutes charge for 60 minutes playtime.
Charging the Earbuds
- Place the earbuds into the charging case. They will automatically begin charging.
- A full charge provides up to 4 hours of music playtime.
Charging the Case
- Connect the USB cable to the charging port on the case and a power source.
- The 300mAh charging case provides an additional 24 hours of playtime for the earbuds.
- Fast Charging: 10 minutes of charging the case can provide up to 60 minutes of playback for the earbuds.
Maintenance
Proper care will extend the lifespan of your Reboot M2 earbuds.
- Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use harsh chemicals or abrasive materials.
- Water Resistance: The earbuds are IPX4 sweat and water resistant, meaning they can withstand splashes and sweat. Do not submerge them in water or expose them to heavy rain. Dry them thoroughly before placing them back in the charging case.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Avoid extreme temperatures.
Troubleshooting
If you encounter issues with your Reboot M2 earbuds, try the following solutions:
| Problem | Solution |
|---|---|
| Earbuds not pairing with device. |
|
| Only one earbud playing sound. |
|
| Earbuds not charging. |
|
| Low volume or poor sound quality. |
|
Specifications
Key technical specifications for your Reboot M2 TWS Earbuds:
- Model Name: M2
- Headphone Type: In-Ear
- Connectivity Technology: Wireless (Bluetooth 5.0)
- Driver Size: 10mm
- Battery Capacity (Case): 300mAh
- Music Playtime: Up to 4 hours per charge, additional 24 hours with case
- Charging Time (Earbuds): Approx. 20 minutes
- Charging Time (Case): Approx. 1 hour
- Control Method: Touch Control
- Water Resistance Level: IPX4 (Sweat and Water Resistant)
- Microphone: Built-In
- Material: ABS+PC
- Item Weight: 300 Grams (likely including packaging/case)
- Special Features: Fast Charging, Microphone Included, Sweatproof
Warranty and Support
Your Reboot M2 TWS Earbuds come with a 1 Year Warranty from the date of purchase, covering manufacturing defects.
For warranty claims, technical support, or any other inquiries, please contact Reboot customer service:
- Email: support@reboot.com
- Website: www.reboot.com/support
Please have your purchase receipt and product model number (M2) ready when contacting support.
