Introduction
This manual provides essential information for the setup, operation, and maintenance of your Scalextric 1967 Daytona 24 Triple Pack slot race cars. This limited edition set features three highly detailed 1:32 scale models, replicating the podium finishers from the iconic 1967 Daytona 24 Hours race.
The set includes:
- Car #23: 330 P2/4
- Car #24: 330 P4 Coupe
- Car #26: 412P
Image: The Scalextric 1967 Daytona 24 Triple Pack box, showcasing the three detailed slot cars.
Safety Information
WARNING: Not suitable for children under 3 years due to small parts – choking hazard. Recommended for ages 8 and up. Please remove all packaging materials before use.
Package Contents
Upon opening the box, verify that all components are present and undamaged. Your Scalextric 1967 Daytona 24 Triple Pack should contain:
- One (1) Scalextric 1:32 Slot Race Car #23 (330 P2/4)
- One (1) Scalextric 1:32 Slot Race Car #24 (330 P4 Coupe)
- One (1) Scalextric 1:32 Slot Race Car #26 (412P)
Image: The three slot cars neatly presented within their display box.
Setup
- Track Assembly: Ensure your 1:32 scale analog slot car race track (e.g., Scalextric ARC ONE, ARC AIR compatible tracks) is correctly assembled and powered according to its own instruction manual.
- Car Preparation: Gently remove each car from its packaging. Inspect the braids (electrical contacts) located underneath the front of the car to ensure they are clean and properly aligned.
- Placement on Track: Carefully place each car onto the track, aligning the guide blade into the slot. Ensure the braids make good contact with the metal rails on either side of the slot.
Image: The three slot cars positioned on a race track, ready for operation.
Operating Instructions
- Power On: Turn on the power to your slot car track system.
- Controller Use: Use your hand controller to apply power to the car. Gradually increase the throttle to move the car forward.
- Steering: The cars are guided by the slot. Adjust your speed to navigate corners without derailing. The built-in magnatraction feature helps improve grip.
- Features: These cars are equipped with working headlights and taillights, which illuminate when power is applied.
Image: The three slot cars lined up at a starting grid on a race track.
Image: The three slot cars navigating a curve on a race track, demonstrating dynamic movement.
Maintenance
- Braid Maintenance: The cars feature an 'easy change braid' system. If a car loses power or runs erratically, check the braids for wear or damage. Replace them as needed by gently pulling the old braids out and inserting new ones.
- Cleaning: Regularly clean the car's wheels, guide blade, and braids to remove dust and debris. Use a soft, dry cloth. Avoid using harsh chemicals. Keep the track rails clean for optimal electrical contact.
- Storage: When not in use, store the cars in their original packaging or a protective case to prevent damage from dust and impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move or moves intermittently. | No power to track, dirty track rails, worn/misaligned braids, loose wiring in car. | Check track power supply. Clean track rails with a non-abrasive cleaner. Inspect and adjust/replace braids. Contact support if internal wiring is suspected. |
| Car frequently derails on corners. | Excessive speed, dirty tires, track unevenness. | Reduce speed when entering corners. Clean car tires. Ensure track sections are securely connected and level. |
| Headlights/Taillights not working. | No power to car, damaged LED/wiring. | Ensure car is receiving power. If power is present and lights still fail, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | C4391A |
| Scale | 1:32 |
| Product Dimensions | 12 x 9 x 3.5 inches (Box) |
| Item Weight | 1.57 pounds (Total) |
| Manufacturer Recommended Age | 14 years and up |
| Features | Working headlights, working taillights, easy change braid, magnatraction |
| Compatibility | 1:32nd scale Analog slot car race tracks (e.g., ARC ONE, ARC AIR) |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Scalextric website. The manufacturer of this product is Hornby Hobbies.
You can also visit the Scalextric Store on Amazon for additional product information and resources.
