Image: The complete Alohappy Dining Table Set for 4.
Introduction
Thank you for choosing the Alohappy Dining Table Set for 4. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining set. Please read these instructions carefully before beginning assembly and retain them for future reference.
This 4-piece set includes one rectangular dining table, two chairs, and one bench, designed for small spaces with a modern farmhouse industrial style. It is constructed from 100% solid pinewood for durability and stability.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the weight capacity: Table: 440 lbs (200 kg), Chairs: 330 lbs (150 kg) each. Bench: 330 lbs (150 kg).
- Keep small parts away from children during assembly.
- Avoid standing on the table, chairs, or bench.
- Use caution when moving the assembled set to prevent damage or injury.
Package Contents
Please verify that all components are present before beginning assembly.
- 1 x Rectangular Dining Table
- 2 x Dining Chairs
- 1 x Dining Bench
- Assembly Hardware (screws, bolts, Allen wrench)
Image: Overview of the 4-piece dining set components.
Setup and Assembly Instructions
Assembly typically requires two adults. Ensure you have adequate space and all parts are accounted for before starting.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Identify each part using the provided parts list (if included in your physical manual).
- Assemble the Table Frame: Attach the table legs to the table top using the provided hardware. Ensure all connections are finger-tightened first.
- Assemble the Chairs: For each chair, attach the backrest to the seat, then attach the legs. Ensure crossbars are installed for stability.
- Assemble the Bench: Attach the bench legs to the bench seat. Ensure the crossbar is securely fastened for stability.
- Final Tightening: Once all components are assembled, carefully place the table, chairs, and bench upright. Systematically tighten all screws and bolts with the Allen wrench until secure. Do not overtighten.
Image: Detail of bench construction, showing structural elements.
Image: Key design features including rounded corners and ergonomic backrests.
Operating Instructions
The Alohappy Dining Table Set is designed for versatile use in various settings.
- Placement: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent wood damage.
- Space-Saving Design: When not in use, the two chairs and the bench can be conveniently placed underneath the table to maximize space in smaller rooms.
- Multifunctional Use: This set can serve as a dining table, a computer desk, a gaming desk, or a breakfast nook table.
Image: Demonstration of the space-saving design, showing chairs and bench stored under the table.
Maintenance
Proper care will extend the life and appearance of your dining set.
- Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Spills: Clean spills immediately to prevent staining.
- Protection: Use coasters or placemats to protect the table surface from hot items, scratches, and moisture.
- Regular Checks: Periodically inspect all connections and tighten any loose hardware to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wobbly table/chairs/bench | Loose hardware; uneven floor. | Check and tighten all screws and bolts. Ensure the set is on a level surface. |
| Difficulty during assembly | Misaligned parts; missing pre-drilled holes. | Review the assembly steps carefully. If parts are misaligned, gently adjust. For missing holes or significant issues, contact customer support. |
| Minor surface damage (scratches, dents) | Impact during shipping or assembly. | For minor scratches, wood repair markers or furniture polish may help. For significant damage, contact customer support. |
Specifications
- Model: Dining Table Set4700
- Material: 100% Solid Pine Wood
- Color: Orange + Grey
- Table Dimensions (L x W x H): 43.3" x 25.5" x 28.7" (110 cm x 64.8 cm x 72.9 cm)
- Chair Dimensions (L x W x H): 16.5" x 15.7" x 35.4" (41.9 cm x 39.9 cm x 89.9 cm)
- Bench Dimensions (L x W x H): 34.7" x 11.8" x 17.7" (88.1 cm x 30 cm x 45 cm)
- Table Weight Capacity: 440 lbs (200 kg)
- Chair Weight Capacity: 330 lbs (150 kg) per chair
- Bench Weight Capacity: 330 lbs (150 kg)
- Item Weight: Approximately 50 lbs (22.7 kg)
Image: Detailed product dimensions for the table, chairs, and bench.
Warranty and Support
Alohappy is committed to providing quality products. While specific warranty details are not included in this manual, please retain your proof of purchase.
For any questions regarding assembly, missing parts, or product issues, please contact Alohappy customer support through your retailer or the official Alohappy website. Provide your model number (Dining Table Set4700) and purchase date for efficient service.
Visit the Alohappy Store for more information.