1. Introduction
Thank you for choosing the Blomus FAROL Mobile Rechargeable LED Floor Lamp. This lamp is designed to provide versatile ambient lighting for both indoor and outdoor environments. Its robust construction from powder-coated aluminum ensures durability, while the integrated rechargeable battery offers cordless operation. Please read this manual carefully to ensure proper use and maintenance of your FAROL lamp.
2. Safety Instructions
- Always use the provided USB charging cable or a certified equivalent.
- Do not expose the lamp to extreme temperatures, direct sunlight for prolonged periods, or open flames.
- Avoid disassembling the lamp or attempting repairs yourself. Contact qualified personnel for service.
- Keep the lamp away from water sources when charging. While suitable for outdoor use, avoid submerging it in water.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- This product contains a rechargeable battery. Dispose of the battery responsibly according to local regulations.
3. Package Contents
- Blomus FAROL Mobile Rechargeable LED Floor Lamp
- USB Charging Cable
- Instruction Manual
4. Setup
4.1 Unpacking
Carefully remove all components from the packaging. Inspect the lamp for any signs of damage. Retain packaging for future transport or storage.
4.2 Initial Charging
Before first use, fully charge the lamp. Connect the provided USB charging cable to the charging port located at the base of the lamp. Connect the other end to a suitable USB power adapter (not included) or a powered USB port. The charging indicator light will illuminate during charging and change color or turn off when fully charged.
The lamp's charging port is located at the base, where the USB cable connects for recharging.
4.3 Placement
The FAROL lamp is designed for both indoor and outdoor use. Place it on a flat, stable surface. Ensure the area is clear of obstructions that could block the light or cause the lamp to fall.
The FAROL floor lamp provides ambient lighting and complements modern interior designs.
5. Operating Instructions
5.1 Power On/Off and Brightness Adjustment
The FAROL lamp features a touch control mechanism located on the top surface of the lamp head. To operate:
- To Turn On: Lightly tap the touch control area once. The lamp will illuminate at its lowest brightness setting.
- To Adjust Brightness: Tap the touch control area repeatedly to cycle through the three available brightness levels.
- To Turn Off: After cycling through all brightness levels, tap the touch control area one more time to turn the lamp off.
This image illustrates the touch control feature on the top of the FAROL lamp, used for power and brightness adjustment.
5.2 Battery Life
A full charge provides approximately 8 to 40 hours of illumination, depending on the selected brightness level. Higher brightness settings will consume battery power more quickly.
5.3 Official Product Video
Official product video demonstrating the features and design of the Blomus FAROL Mobile LED Lamp, including its portability and light settings.
6. Maintenance
6.1 Cleaning
To clean the lamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the metallic finish. Ensure the charging port is dry before connecting the USB cable.
6.2 Battery Care
To prolong battery life, avoid fully discharging the lamp frequently. If storing the lamp for an extended period, charge it to approximately 50% and recharge every few months.
7. Troubleshooting
- Lamp does not turn on: Ensure the lamp is charged. Connect it to the USB charging cable and allow it to charge for at least 30 minutes before attempting to turn it on again.
- Lamp does not charge: Verify that the USB cable is securely connected to both the lamp and the power source. Try a different USB power adapter or port.
- Short battery life: Battery life varies significantly with brightness settings. Ensure the lamp is fully charged. If the issue persists after a full charge, contact customer support.
- Light flickers: This may indicate a low battery. Recharge the lamp. If flickering continues after a full charge, contact customer support.
8. Specifications
| Model Number | 66221 |
| Dimensions (H x D) | 45.3" x 5.9" (115 cm x 15 cm) |
| Material | Powder-coated Aluminum |
| Finish Type | Metallic (Gunmetal Metallic) |
| Light Source Type | LED |
| Lumen Output | 115 lumens |
| Color Temperature | 3000 K |
| Power Source | Battery Powered (Rechargeable via USB) |
| Battery Run Time | 8-40 hours (depending on brightness) |
| Control Method | Touch |
| Wattage | 1.5 watts |
| Voltage | 5 Volts |
| Item Weight | 23.6 Kilograms |
| Usage Environment | Indoor or Outdoor |
9. Warranty and Support
The Blomus FAROL Mobile Rechargeable LED Floor Lamp is covered by a 2-year manufacturer defect warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or technical support, please contact Blomus customer service through their official website or your retailer. Please have your proof of purchase and model number (66221) available when contacting support.
