Yale Assure Lever Wi-Fi Keypad Smart Lock (Model YRL216-WF1-0BP) Instruction Manual

Introduction

The Yale Assure Lever is a smart lever lock designed for key-free entry. It integrates Wi-Fi and Bluetooth connectivity, allowing users to manage access remotely via a mobile application. This lock also supports automatic locking and unlocking, and can be controlled using voice assistants. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting of your Yale Assure Lever.

Setup and Installation

Tools Required:

• Phillips Head Screwdriver

Door Preparation Requirements:

• Cross Borehole: 2-1/8 inches in diameter.
• Edge Borehole: 1 inch in diameter.
• Backset: 2-3/8 inches or 2-3/4 inches.
• Door Thickness: Between 1-3/8 inches and 1-3/4 inches.
• Ensure any existing hardware is removed.

Installation Steps:

1. Determine Latch Orientation: Refer to the door template to ensure the latchbolt curve faces the correct direction.
2. Install Latch: Slide the latch into the door, ensuring the horizontal rectangular hole is centered in the cross borehole. Secure with two wood screws.
3. Install Strike Plate: Install the strike plate on the door frame using two wood screws.
4. Position Exterior Keypad: Place the exterior keypad flush on the outside of the door, guiding the cable under the latch. Ensure the tailpiece is vertical with the arrow facing upward.
5. Install Interior Mounting Bracket: Guide the cable through the hole in the mounting bracket. Ensure the bracket is flush and straight, then secure with two long through bolts. Do not overtighten.
6. Connect Cable and Install Interior Lever: Attach the cable to the adapter on the interior side of the lock, ensuring ridges face outwards. Seat the cable under the cable hook. Mount the interior side of the lock onto the mounting plate, being careful not to pinch the cable. Ensure the thumb turn is horizontal. Secure with two small black screws.
7. Insert Key-Free Cylinder: Insert the key-free cylinder into the opening on the keypad side, ensuring the bar faces the opposite direction of the latch.
8. Attach Levers: Snap the interior and exterior levers into place. Push in the spring clips using the battery key or screwdriver as you slide the levers.
9. Test Latchbolt: Rotate the lever from both sides to ensure proper function.
10. Insert Smart Module (if applicable): If your model includes a Yale Smart Module, insert it into the slot above the battery compartment before inserting batteries. Ensure pins are on the bottom right corner.
11. Insert Batteries: Insert four AA batteries into the battery compartment.
12. Install Battery Cover: Secure the battery cover.
13. Set Master Entry Code: Wake the keypad, press the gear icon, press '1', press the gear icon again, then enter a 4-8 digit master code and press the gear icon to complete.

Visual Installation Guide:

Image: Installing the interior unit of the Yale Assure Lever lock. The battery compartment is open, showing the internal components and screws being tightened.

Operating Instructions

Key-Free Entry:

To unlock the door without a physical key, simply enter your programmed access code on the backlit keypad. The lock will disengage, allowing you to open the door.

Image: A user entering an access code on the Yale Assure Lever keypad for key-free entry.

Automatic Locking and Unlocking:

The Assure Lever can be configured to unlock automatically as you approach the door with your smartphone and relock once the door is closed. This feature provides seamless entry and enhanced security.

Image: The Yale Assure Lever automatically unlocks as a user approaches with their phone, offering convenient key-free access.

Remote Access and Monitoring:

Utilize the Yale Access App to lock or unlock your door, share access with others, and monitor entry and exit activity from any location. No additional hub is required for this functionality.

Image: The Yale Access App interface on a smartphone, demonstrating remote control and monitoring of the lock status.

Voice Assistant Integration:

The lock is compatible with Amazon Alexa, Hey Google, and Siri. You can use voice commands to lock, unlock, and check the status of your Yale Assure Lever.

Maintenance

Battery Replacement:

The Yale Assure Lever requires four AA batteries. When the battery level is low, the lock will provide notifications. Replace all four batteries simultaneously with new, high-quality alkaline batteries for optimal performance. Refer to the installation video for guidance on accessing the battery compartment.

Cleaning:

Clean the keypad and exterior surfaces with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components.

Troubleshooting

• Keypad Unresponsive: Check battery levels and replace if necessary. Ensure the keypad is clean and free from debris.
• Lock Not Engaging/Disengaging: Verify that the door is properly aligned and the latch is not obstructed. Re-check installation steps to ensure all components are correctly assembled and tightened.
• App Connectivity Issues: Ensure your Wi-Fi network is stable and the lock is within range. Restart your router and the Yale Access App.
• Forgotten Code: Refer to the Yale Access App for code management or reset the lock to factory settings and reprogram.

Specifications

Warranty and Support

Warranty Information:

The Yale Assure Lever comes with a Lifetime limited warranty on Finish and Mechanical components, and a One-year warranty on Electronics.

Customer Support:

For further assistance, technical support, or warranty claims, please visit the official Yale website or contact their customer service department. Keep your purchase receipt and product model number handy for quicker service.