Verbatim Rechargeable Multi-Device Wireless Optical Mouse (Model 70755)

1. Introduction

The Verbatim Multi-Device Wireless Rechargeable Optical Mouse is designed for seamless connectivity across multiple devices. It supports both Bluetooth 5.0 and 2.4Ghz USB wireless receiver modes, allowing quick switching between up to three connected devices. Its contoured design provides a comfortable grip, and the integrated rechargeable battery offers an eco-friendly power solution.

Image: Top view of the Verbatim Multi-Device Wireless Optical Mouse, showcasing its sleek black design with a scroll wheel and DPI button.

2. Package Contents

Please verify that all items listed below are included in your package:

• One (1) Multi-Device Wireless Rechargeable Optical Mouse
• One (1) AA Rechargeable Battery (pre-installed or included separately)
• One (1) USB-C to USB-A Charging Cable
• One (1) Nano Receiver (stored inside the mouse)

Image: The Verbatim Multi-Device Wireless Optical Mouse displayed alongside its included accessories: a USB-C to USB-A charging cable and a nano receiver.

3. Setup

3.1. Charging the Mouse

The mouse comes with a rechargeable AA battery. To charge the mouse:

1. Connect the small end of the USB-C charging cable to the USB-C port on the front of the mouse.
2. Connect the larger USB-A end of the charging cable to a powered USB-A port on your computer or a USB wall adapter.
3. The LED indicator on the mouse will show charging status (refer to LED indicator section for details).

3.2. Accessing the Nano Receiver and Battery

The top cover of the mouse is magnetically attached for easy access to the nano receiver storage compartment and the battery.

1. Gently lift the rear part of the top cover to detach it.
2. The nano receiver is stored in a dedicated slot. Remove it for 2.4Ghz wireless connection.
3. The rechargeable AA battery is located beneath the cover. Ensure it is properly inserted.
4. Replace the top cover, ensuring it snaps securely into place.

3.3. Connecting via 2.4GHz Wireless (USB Nano Receiver)

1. Remove the nano receiver from its storage compartment inside the mouse.
2. Plug the nano receiver into an available USB-A port on your computer.
3. Turn on the mouse using the ON/OFF switch located on the bottom of the mouse.
4. Press the 'Connect' button on the bottom of the mouse until the indicator light for '2.4G' illuminates. The mouse should now be connected.

3.4. Connecting via Bluetooth 5.0 (BT1 / BT2)

1. Turn on the mouse using the ON/OFF switch on the bottom.
2. Press the 'Connect' button on the bottom of the mouse to select either 'BT1' or 'BT2' channel. The corresponding indicator light will flash rapidly, indicating pairing mode.
3. On your device (computer, tablet, etc.), navigate to Bluetooth settings.
4. Search for new devices and select "Verbatim Mouse" from the list.
5. Once paired, the indicator light will stop flashing and remain solid for a few seconds before turning off. The mouse is now connected.
6. Repeat these steps for a second Bluetooth device using the 'BT2' channel.

Image: The underside of the Verbatim mouse, showing the ON/OFF switch, the 'Connect' button for switching between 2.4G, BT1, and BT2 modes, and the optical sensor.

4. Operating Instructions

4.1. Switching Between Connected Devices

The mouse allows quick switching between up to three connected devices (one 2.4Ghz USB and two Bluetooth devices).

• To switch, simply press the 'Connect' button on the bottom of the mouse.
• Each press will cycle through the available channels: 2.4G > BT1 > BT2.
• The corresponding indicator light on the mouse will briefly illuminate to show the active connection mode.

4.2. Adjusting DPI (Dots Per Inch)

The DPI button, located on the top of the mouse below the scroll wheel, allows you to adjust the cursor sensitivity.

• Press the 'DPI' button to cycle through different sensitivity settings.
• Each press will change the DPI level, allowing you to find the preferred cursor speed for your tasks.

Image: A hand operating the Verbatim Multi-Device Wireless Optical Mouse on a desk, demonstrating its ergonomic fit during use.

5. Maintenance

5.1. Battery Care

The mouse uses a rechargeable AA battery. To ensure optimal battery life:

• Charge the mouse fully before first use.
• Avoid completely draining the battery frequently.
• If the mouse will not be used for an extended period, turn it off using the ON/OFF switch.
• The magnetic top cover allows for easy access to replace the rechargeable battery if needed.

5.2. Cleaning

To clean your mouse:

• Ensure the mouse is turned off.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
• Avoid using harsh chemicals or abrasive materials.
• Do not allow moisture to enter any openings.

Image: The Verbatim mouse positioned on a wooden surface, emphasizing its design and the concept of eco-friendly power through its rechargeable battery.

6. Troubleshooting

• Mouse not responding: Ensure the mouse is turned on. Check battery level and charge if necessary. For 2.4Ghz, ensure the nano receiver is securely plugged into a USB port. For Bluetooth, ensure the mouse is paired and the correct BT channel (BT1/BT2) is selected. Try restarting your computer/device.
• Cursor movement is erratic or slow: Clean the optical sensor on the bottom of the mouse. Ensure you are using the mouse on a suitable surface (non-reflective, non-transparent). Adjust the DPI setting using the DPI button.
• Cannot pair via Bluetooth: Ensure the mouse is in pairing mode (BT1 or BT2 indicator flashing rapidly). Make sure your device's Bluetooth is enabled and discoverable. Try removing previous pairings for the mouse on your device and re-pairing.
• Connection drops frequently: Ensure the mouse is within range of your device (typically up to 10 meters for Bluetooth/2.4Ghz). Minimize interference from other wireless devices.

7. Specifications

Image: Side profile of the Verbatim mouse, illustrating its slim design and key dimensions: 4.05 inches length, 2.7 inches width, and 1.34 inches height.

8. Warranty and Support

The Verbatim Multi-Device Wireless Rechargeable Optical Mouse (Model 70755) is backed by a 1-Year Limited Lifetime Warranty from Verbatim Americas LLC.

For technical support or warranty claims, please refer to the official Verbatim website or contact their customer service directly. Keep your proof of purchase for warranty validation.

Image: A blue and white circular seal indicating a "1-Year Limited Warranty" from Verbatim.