1. Product Overview
The Akozon 8 LED Lighting System Kit is designed to enhance the realism and visibility of your RC aircraft and helicopters. This kit simulates various aircraft lights, providing a more immersive and functional experience for your remote-controlled models.
Key Features:
- Comprehensive Lighting: Includes 2 white landing gear lights, 1 red left wing light, 1 green right wing light, 1 red anti-collision light, and 3 flashing white lights.
- Wide Compatibility: Suitable for RC airplanes and helicopters.
- Flexible Installation: Features a 600mm (23.6 inch) cable length to accommodate various model sizes and installation requirements.
- Dual Control Modes: Supports both manual and remote control operation for versatile use.
- Transmitter Compatibility: Compatible with FUTABA, JR, KO, 2.4G, and other standard RC transmitters.
- Low Voltage Detection: Integrated function ensures safe return by flashing all lights quickly when receiver voltage drops below 4.9V.
2. Package Contents
Please verify that all components listed below are included in your package. If any items are missing or damaged, please contact customer support.
Figure 2.1: Complete package contents of the Akozon 8 LED Lighting System Kit.
- 1 x 8 LED Lighting System Kit (pre-wired)
- 1 x Control Box
- 2 x Adhesive Tapes
- 1 x User Manual (this document)
3. Installation Guide
Follow these steps to properly install the LED lighting system on your RC model.
3.1 Component Identification
Figure 3.1: The 8 LED light strands and the main control box.
Figure 3.2: The LED control box.
The kit consists of a central control box and eight individual LED lights pre-wired with color-coded connectors. The control box has a power input connector and multiple output ports for the LED lights.
3.2 Wiring Instructions
- Plan Placement: Determine the optimal locations for each of the 8 LED lights on your RC aircraft or helicopter. Refer to standard aircraft lighting configurations:
- 2 white lights for landing gear (typically on the underside or landing struts).
- 1 red light for the left wingtip.
- 1 green light for the right wingtip.
- 1 red anti-collision light (often on top or bottom fuselage).
- 3 flashing white lights (position as desired for visibility, e.g., tail, fuselage).
- Mount LEDs: Securely attach each LED light to its designated position using the provided adhesive tape or other suitable mounting methods. Ensure the wires are routed neatly and do not interfere with moving parts.
- Connect to Control Box: Plug the connectors from each LED light into the corresponding ports on the control box. The connectors are typically color-coded or labeled to match the light type (e.g., 'RED' for red lights, 'WHITE' for white lights).
- Connect Power: Connect the power input cable from the control box to an available channel on your RC receiver or a dedicated power source (e.g., a BEC or separate battery) that provides appropriate voltage (typically 4.8V-6V). Ensure correct polarity.
- Secure Control Box: Mount the control box in a secure location within your RC model, away from heat sources or excessive vibration, using adhesive tape or zip ties.
- Test System: Before flight, power on your RC model and transmitter. Verify that all LED lights illuminate and function correctly according to their type (steady, flashing).
Figure 3.3: The lighting system is compatible with various RC transmitters.
4. Operating Instructions
The Akozon LED Lighting System offers flexible control options.
4.1 Control Modes
- Manual Mode: If connected directly to a power source or a simple switch, the lights will activate upon power-up.
- Remote Control Mode: When connected to an auxiliary channel on your RC receiver, the lights can be switched on/off or have their modes changed (if applicable) via a switch or knob on your RC transmitter. Consult your transmitter's manual for channel assignment and configuration.
4.2 Low Voltage Detection
The system includes a low voltage detection feature to help prevent unexpected power loss during flight. If the receiver voltage drops below 4.9V, all lights will begin to flash rapidly. This serves as a visual warning to land your RC model safely.
Figure 4.1: Low voltage detection warning.
5. Maintenance
To ensure the longevity and optimal performance of your LED lighting system, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the LED lenses and control box with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
- Wiring Inspection: Periodically check all wiring connections for any signs of wear, fraying, or loose connections. Secure any loose wires.
- Environmental Protection: While designed for outdoor use, avoid prolonged exposure to extreme moisture or direct impact.
- Storage: When not in use, store the RC model with the lighting system in a cool, dry place.
6. Troubleshooting
If you encounter any issues with your Akozon LED Lighting System, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power, incorrect wiring, faulty control box/LED. | Check power connection to receiver/battery. Verify all LED connectors are securely plugged into the control box. Ensure correct polarity for power input. Test with a different power source if possible. |
| Some lights are not working. | Loose connection, damaged LED, faulty port on control box. | Check the connection of the specific non-working LED to the control box. Inspect the LED for visible damage. Try plugging the LED into a different port on the control box (if available) to isolate the issue. |
| Lights flash rapidly unexpectedly. | Low receiver voltage. | This is a low voltage warning. Land your RC model immediately and check your battery charge or power supply. |
| Lights are dim. | Insufficient power, dirty LED lenses. | Ensure your power source provides adequate voltage and current. Clean the LED lenses with a soft cloth. |
7. Product Specifications
Detailed technical specifications for the Akozon 8 LED Lighting System Kit.
| Specification | Detail |
|---|---|
| Brand | Akozon |
| Model Number | Akozon6mxpe2fqh9 |
| Material | Plastic |
| Power Source | External Battery (via RC receiver) |
| Operating Voltage | Typically 4.8V - 6V (standard RC receiver voltage) |
| Operating Modes | Manual, Remote Control |
| Usage Environment | Outdoor |
| LED Cable Length | 600mm (23.6 inches) |
| LED Diameter | 5mm |
| Compatibility | FUTABA / JR / KO / 2.4G and other standard RC transmitters/receivers |
| Special Features | Low voltage detection (flashes below 4.9V) |
Figure 7.1: LED cable length measurement.
8. Warranty and Support
Akozon products are manufactured to high-quality standards. For warranty information, technical support, or assistance with product issues, please refer to the seller's return policy or contact the retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.