Introduction
Thank you for choosing the EUGAD 0179ZZ Narrow Bedside Table. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
Important Safety Precautions:
- Ensure correct installation and handling to prevent injury or the table tipping over.
- Avoid direct contact with liquids, as the table is not designed to be stain-resistant. Promptly wipe any spills.
- Do not exceed the maximum weight recommendation of 9 kg for the tabletop.
- Keep small parts and assembly hardware out of reach of children.
Product Components
The EUGAD 0179ZZ Narrow Bedside Table consists of the following main components:
- Tabletop
- Side storage compartments (2 open)
- Drawer with metal runners and rounded knob
- Raised base
- Non-slip feet
- Assembly hardware (screws, dowels, etc.)
Figure 1: Key storage features of the bedside table.
Assembly Instructions
Assembly of the EUGAD 0179ZZ bedside table is designed to be straightforward. Please follow the detailed illustrated manual and use the numbered accessories provided in the packaging.
Required Tools (Not Included):
- Phillips head screwdriver
- Hammer (optional, for dowels)
Step-by-Step Assembly:
- Unpack and Verify: Carefully unpack all components and hardware. Compare them against the parts list in the included manual to ensure all pieces are present and undamaged.
- Assemble the Main Frame: Follow the numerical sequence in the provided manual to connect the side panels, top, and bottom panels using the designated screws and dowels. Ensure all connections are secure but do not overtighten.
- Install Shelves: Insert the fixed shelves into the designated slots within the main frame.
- Assemble the Drawer: Construct the drawer box according to the manual. Attach the metal runners to the drawer sides and the corresponding runners to the table frame. Install the rounded knob onto the drawer front.
- Attach the Base and Feet: Secure the raised base to the bottom of the table. Mount the non-slip feet onto the bottom of the base to protect your floor and reduce noise.
- Final Check: Once assembled, gently test the stability of the table and the smooth operation of the drawer.
Note: Exercise caution during assembly, as particle board can be damaged if excessive force is applied to screws.
Operation
The EUGAD 0179ZZ bedside table is designed for convenient storage and display.
- Tabletop: Use the top surface for lamps, alarm clocks, or decorative items. Ensure items do not exceed the maximum weight capacity of 9 kg.
- Open Compartments: The two open compartments are ideal for books, magazines, or small decorative objects, keeping them easily accessible.
- Drawer: The bottom drawer provides concealed storage for personal items. The smooth metal runners ensure easy opening and closing.
Figure 2: Details of the tabletop, drawer knob, and runners.
Maintenance and Care
Proper care will extend the life and appearance of your bedside table.
- Cleaning: Wipe the surface with a damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the melamine coating.
- Moisture Protection: The raised base helps protect the bottom drawer from moisture. However, avoid placing the table in excessively damp environments.
- Stability: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Floor Protection: The non-slip feet are designed to protect your floor from scratches and reduce noise when moving the table.
Figure 3: Features for protection and stability.
Troubleshooting
If you encounter any issues with your bedside table, refer to the following common solutions:
- Table feels wobbly: Check all assembly screws and ensure they are securely tightened. Make sure the table is placed on a flat, even surface.
- Drawer does not slide smoothly: Verify that the metal runners are correctly installed and aligned on both the drawer and the table frame. Ensure no debris is obstructing the runners.
- Missing parts: If any parts are missing upon unboxing, please contact customer support with your purchase details.
Specifications
Detailed specifications for the EUGAD 0179ZZ Narrow Bedside Table:
| Feature | Detail |
|---|---|
| Model Number | 0179ZZ |
| Overall Dimensions (L x W x H) | 30 x 25 x 66 cm (11.8 x 9.8 x 26.0 inches) |
| Drawer Dimensions (L x W x H) | 17 x 24 x 11.5 cm (6.7 x 9.4 x 4.5 inches) |
| Material | 15 mm thick chipboard (E1 class) with melamine coating |
| Color | White |
| Item Weight | 21 kg (46.3 lbs) |
| Maximum Weight Recommendation (Tabletop) | 9 kg (19.8 lbs) |
| Special Features | Storage, Raised Base, Non-slip Feet |
Figure 4: Product dimensions overview.
Warranty Information
Specific warranty details for the EUGAD 0179ZZ Narrow Bedside Table are not provided in this manual. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.
Customer Support
For further assistance, missing parts, or inquiries not covered in this manual, please contact EUGAD customer support through the retailer's platform or the official EUGAD website.