Introduction
Thank you for choosing the vidaXL Queen Size Platform Bed Frame. This manual provides comprehensive instructions for the safe assembly, proper operation, routine maintenance, and effective troubleshooting of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
- Always assemble the bed frame on a soft, clean surface to prevent damage to the product or your floor.
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Tighten all fasteners securely, but do not overtighten. Periodically check and retighten fasteners as needed.
- Do not exceed the maximum weight recommendation of 617 pounds (280 kg).
- This bed frame is designed for use with a mattress directly on the slats; a box spring is not required.
- Do not stand or jump on the bed frame.
Package Contents
Please verify that all components listed below are included in your package:
- Upholstered Side Rails (2)
- Upholstered End Rails (2)
- Center Support Beam (1)
- Support Legs (6)
- Plywood Slats (set)
- Hardware Pack (bolts, washers, Allen key)
Assembly Instructions
Follow these steps for a quick and easy assembly. It is recommended to have two people for assembly.
Step 1: Prepare the Components
Unpack all components and lay them out on a clean, soft surface. Identify each part using the package contents list. Refer to the dimensions image below for an overview of the bed frame's size.
Step 2: Assemble the Frame
Connect the upholstered side rails and end rails to form the rectangular bed frame. Ensure the connection points are aligned and secure them using the provided hardware. Attach the six support legs to the designated points on the frame. The video below demonstrates the general assembly process.
Step 3: Install the Center Support and Slats
Place the center support beam along the middle of the assembled frame, connecting it to the end rails. Then, unroll or place the plywood slats across the frame, ensuring they are evenly spaced and secured according to the instructions in your hardware pack. The slats provide essential support for your mattress.
Step 4: Final Checks
Once all components are assembled, double-check that all bolts are tightened and the frame is stable. Ensure the support legs are firmly on the ground. The bed frame is now ready for your mattress.
Operation
This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your Queen size mattress (recommended size 59.8" x 80") onto the assembled plywood slats. Ensure the mattress is centered and fully supported by the slats. The bed frame has a maximum weight capacity of 617 pounds (280 kg), including the mattress and occupants.
Maintenance
To ensure the longevity and appearance of your vidaXL bed frame, follow these maintenance guidelines:
- Cleaning the Fabric: For general cleaning, gently vacuum the upholstered fabric to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For tougher stains, use a mild fabric cleaner following the product's instructions, testing on an inconspicuous area first. Do not use harsh chemicals or abrasive cleaners.
- Frame Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary to maintain stability and prevent squeaking.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the fabric to fade.
- Weight Distribution: Ensure weight is evenly distributed across the bed frame to prevent stress on specific areas.
Troubleshooting
If you encounter any issues with your bed frame, refer to the following common problems and solutions:
- Squeaking Noises:
Solution: Check all bolts and connections. Tighten any loose fasteners. Ensure the support legs are firmly in contact with the floor. If the noise persists, try lubricating the connection points with a silicone spray or placing felt pads between metal-on-metal contact points. - Bed Frame Feels Unstable:
Solution: Verify that all assembly steps were followed correctly and all hardware is securely tightened. Ensure the bed frame is on a level surface. Adjust the support legs if they are uneven. - Slats Sagging or Breaking:
Solution: Ensure the mattress weight does not exceed the maximum capacity. Check if the center support beam is properly installed and supporting the slats. Replace any damaged slats immediately to prevent further issues.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 81.1 x 61.02 x 13.78 inches (L x W x H) |
| Item Weight | 52.5 pounds (23.8 kg) |
| Manufacturer | vidaXL |
| Item Model Number | 347108 |
| Assembly Required | Yes |
| Batteries Required | No |
| Size | Queen |
| Color | Dark Gray |
| Maximum Weight Recommendation | 617 Pounds (280 kg) |
Warranty and Support
For warranty information, product support, or to order replacement parts, please visit the official vidaXL website or contact their customer service directly. Keep your purchase receipt and model number (347108) handy for any inquiries.
Contact Information:
Please refer to the contact details provided on your purchase documentation or the official vidaXL website for the most up-to-date support information.
