sodastream Pepsi Beverage Mix 440ml

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

SodaStream® Pepsi® Beverage Mix User Manual

Model: Pepsi Beverage Mix 440ml (Pack of 4)

Introduction

This manual provides essential information for the proper use and care of your SodaStream® Pepsi® Beverage Mix. This product allows you to transform plain sparkling water into a refreshing Pepsi-flavored drink using your SodaStream sparkling water maker.

Each 14.9 Fl Oz (440ml) bottle of concentrate is designed to create approximately 2-2.5 Gallons of bold, refreshing Pepsi Cola. This pack contains four bottles, providing the concentrate to make up to 9.5 Gallons of Pepsi.

Four bottles of SodaStream Pepsi Beverage Mix

Image: Four 440ml bottles of SodaStream Pepsi Beverage Mix, each with a blue and white label featuring the Pepsi logo and SodaStream branding. Each bottle indicates it makes about 9 liters of drink.

Setup and Preparation

Before preparing your Pepsi beverage, ensure you have a SodaStream sparkling water maker and a SodaStream carbonating bottle filled with cold water.

  1. Carbonate Water: Fill your SodaStream carbonating bottle with cold water up to the fill line. Carbonate the water using your SodaStream machine according to its specific instructions. It is crucial to always fizz your water before adding the beverage mix.
  2. Measure Mix: Open the SodaStream Pepsi Beverage Mix bottle. The cap of the mix bottle can be used as a measuring cup. Pour the beverage mix into the inner middle line of the measuring cup (the cap).
  3. Add Mix to Water: Tilt the carbonating bottle containing the freshly carbonated water. Slowly pour the measured beverage mix into the carbonated water.
  4. Gently Mix: Close the cap of the carbonating bottle. Gently shake the bottle to mix the concentrate with the carbonated water. Avoid vigorous shaking to prevent excessive fizzing.
  5. Serve: Pour into a glass with ice and enjoy your homemade Pepsi!
Step-by-step instructions for making SodaStream Pepsi

Image: A visual guide showing five steps to prepare the SodaStream Pepsi beverage: 1. Fill SodaStream bottle with cold water. 2. Fizz water. 3. Pour beverage mix into measuring cup. 4. Tilt bottle and add mix, then gently shake. 5. Enjoy the drink.

Operating Tips

  • Cold Water is Key: Always use very cold water for carbonation, as cold water absorbs CO2 more effectively, resulting in better fizz.
  • Add Mix After Carbonation: Never add the beverage mix before carbonating the water. This can damage your SodaStream machine and create a mess.
  • Adjust to Taste: You can adjust the amount of concentrate to suit your personal taste preference. Start with the recommended amount and add more if you desire a stronger flavor.
  • Storage After Mixing: Store the prepared beverage in the refrigerator. For best fizz and flavor, consume within a few days.
SodaStream machine with Pepsi mix and prepared drink, indicating it makes about 24 cans

Image: A SodaStream sparkling water maker on a counter next to a bottle of Pepsi beverage mix and a glass of prepared Pepsi with ice. A graphic overlay indicates that the mix "Makes about 24 cans" of soda.

Maintenance and Storage

  • Bottle Care: After use, rinse the SodaStream carbonating bottle thoroughly. Refer to your SodaStream machine's manual for specific cleaning instructions for the carbonating bottle.
  • Mix Storage: Store the SodaStream Pepsi Beverage Mix bottles in a cool, dry place, away from direct sunlight. Refrigeration is not required for the concentrate before opening.
  • After Opening: Once opened, the concentrate should be consumed within the recommended period (typically within 6 weeks) for optimal flavor. Ensure the cap is tightly sealed after each use.

Troubleshooting

  • Weak Flavor: If the Pepsi flavor is too weak, ensure you are using the correct amount of concentrate. You may add a little more mix to taste.
  • Not Fizzy Enough: Ensure your water is very cold before carbonation. Also, check your SodaStream machine's CO2 cylinder to ensure it is not empty. Always carbonate water thoroughly before adding the mix.
  • Excessive Foam/Overflow: This usually happens if the water is not cold enough, or if the mix is added before carbonation. Always add mix to carbonated cold water.
  • Mix Not Dissolving: Ensure you gently shake the bottle after adding the mix. If the water is too cold, the mix might take slightly longer to dissolve.

Specifications

AttributeDetail
Brandsodastream
Item FormLiquid
FlavorPepsi Regular
Number of Items4 bottles
Package InformationBottle
Volume per Bottle14.9 Fl Oz (440ml)
Yield per BottleApproximately 2-2.5 Gallons (7.5-9.5 Liters)
Total Yield (4-pack)Up to 9.5 Gallons (36 Liters)

Ingredients

SUGAR, WATER, CARAMEL COLOR, INVERT SUGAR, PHOSPHORIC ACID, SODIUM CITRATE, NATURAL FLAVOUR, SUCRALOSE, CAFFEINE, CITRIC ACID, ACESULFAME POTASSIUM, SODIUM BENZOATE (PRESERVES FRESHNESS). CONTAINS SULFITES.

Dimensions

Dimensions of a SodaStream Pepsi Beverage Mix bottle

Image: A single bottle of SodaStream Pepsi Beverage Mix with measurements indicating a height of 7.7 inches and a width of 2.8 inches (excluding cap and label).

  • Height: Approximately 7.7 inches
  • Width: Approximately 2.8 inches
  • Bottle Material: Made with 100% recycled plastic (excluding cap & label)

Warranty and Support

Specific warranty information for the SodaStream Pepsi Beverage Mix is not provided in this manual. For details regarding product warranty, returns, or further support, please refer to the official SodaStream website or contact SodaStream customer service directly.

You can typically find support information on the SodaStream Official Store on Amazon or their main corporate website.

© 2024 SodaStream. All rights reserved.

This manual is for informational purposes only. Always follow the instructions on the product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.