Lasko CT22835 Ceramic Tower Heater User Manual

1. Important Safety Instructions

Please read and save these important safety instructions before using this heater. Failure to follow these instructions could result in fire, electric shock, or injury.

• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• This heater includes an automatic shut-off feature that activates if the unit tips over or overheats, enhancing safety.

2. Product Overview

The Lasko CT22835 is a 1500W ceramic tower heater designed to provide efficient and rapid heating for indoor spaces. It features an oscillating function for wide heat distribution, a digital remote control for convenient operation, and multiple safety features including overheat protection and automatic shut-off.

Image 2.1: The Lasko CT22835 Ceramic Tower Heater, shown with its remote control and indicating heat emission. This image highlights the sleek design and the operational aspect of the heater.

Key Features:

• Maximum Power: 1500W for effective heating.
• Power Levels: Two distinct heat settings to suit your comfort needs.
• Overheat Protection: Automatically shuts off if the unit becomes too hot.
• Adjustable Thermostat: Maintain your desired room temperature.
• Oscillation Mode: Distributes heat evenly across a wider area.
• Digital Remote Control: Convenient operation from a distance.
• Timer Function: Program the heater to operate for a set duration.
• Automatic Shut-off: Safety feature that activates if the unit is accidentally tipped over.

Image 2.2: A direct front view of the Lasko CT22835 Ceramic Tower Heater, showcasing its grille and digital display area.

3. Setup Instructions

3.1 Unpacking

1. Carefully remove the heater from its packaging.
2. Retain the packaging for off-season storage.
3. Ensure all components, including the remote control, are present and undamaged.

3.2 Placement

• Place the heater on a firm, level surface.
• Ensure there is at least 3 feet (0.9 m) of clear space around the heater, especially from walls, furniture, and curtains, to allow for proper airflow and prevent fire hazards.
• Do not place the heater directly below a power outlet.
• Avoid placing the heater in high-traffic areas where it could be easily tripped over.

3.3 Power Connection

• Ensure the heater is turned off before plugging it into an electrical outlet.
• Plug the power cord directly into a 120V AC wall outlet. Do not use extension cords or power strips.

Image 3.1: The Lasko CT22835 heater positioned in a room, demonstrating appropriate placement away from furniture. This illustrates a typical setup scenario.

4. Operating Instructions

The Lasko CT22835 heater can be operated using the control panel on the unit or the included digital remote control.

4.1 Control Panel

Image 4.1: A detailed view of the heater's control panel, showing the digital temperature display and various control buttons.

• Power Button (⏻): Press to turn the heater ON or OFF. The digital display will show the current room temperature when ON.
• Temperature Adjustment (+ / -): Use these buttons to set your desired temperature. The heater will cycle ON and OFF to maintain this temperature.
• Mode Button (M): Cycles through the two heat settings (High/Low).
• Oscillation Button (⟳): Activates or deactivates the oscillation function, allowing the heater to rotate and distribute heat.
• Timer Button (◷): Press to set the auto-off timer. Each press increases the timer by one hour, up to a maximum of 8 hours.

4.2 Remote Control

The remote control provides the same functionality as the control panel for convenient operation.

Image 4.2: The digital remote control for the Lasko CT22835 heater, showing its various buttons for power, temperature, mode, oscillation, and timer functions.

• Ensure the remote control has working batteries (typically 2 x AAA, not included).
• Point the remote control directly at the heater's display panel for optimal response.
• The buttons on the remote correspond to the functions on the control panel.

Image 4.3: The rear view of the Lasko CT22835 heater, highlighting the integrated storage slot for the remote control.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

5.1 Cleaning

• Always unplug the heater before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the heater.
• Do not use gasoline, benzene, paint thinner, or other harsh cleaners, as they may damage the heater's finish.
• Use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
• Never immerse the heater in water or allow water to drip into the interior.

5.2 Storage

• Store the heater in its original carton in a cool, dry place when not in use.
• Ensure the power cord is neatly wrapped and secured to prevent damage.

6. Troubleshooting

If your heater is not operating correctly, refer to the following common issues and solutions:

7. Specifications

Detailed technical specifications for the Lasko CT22835 Ceramic Tower Heater.

Image 7.1: A diagram illustrating the dimensions of the Lasko CT22835 Ceramic Tower Heater, including height, width, and depth.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Lasko customer service directly. Keep your proof of purchase for any warranty claims.

Lasko's official website typically provides contact information and FAQs for their products. Please visit their website for the most up-to-date support resources.