Emliviar WE215BM BK

Emliviar Farmhouse 25 Inch Outdoor Wall Lantern Sconce (Model WE215BM BK) Instruction Manual

Model: WE215BM BK

Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Emliviar Farmhouse 25 Inch Outdoor Wall Lantern Sconce, Model WE215BM BK. This outdoor light fixture features a durable aluminum construction with water grain glass and a black finish, designed for wet locations.

Emliviar Farmhouse 25 Inch Outdoor Wall Lantern Sconce

Image: The Emliviar Farmhouse 25 Inch Outdoor Wall Lantern Sconce, showcasing its design and black finish.

Safety Information

  • Always turn off the power at the main fuse or circuit breaker box before beginning installation.
  • Consult a qualified electrician if you are unsure about the installation process.
  • Ensure all electrical connections are secure and comply with local codes and ordinances.
  • Do not exceed the maximum wattage specified for the bulb.
  • Handle glass components with care to prevent breakage.

Package Contents

Verify that all components are present before beginning installation.

  • 1 x Emliviar Outdoor Wall Lantern Sconce (Model WE215BM BK)
  • Mounting Hardware (screws, wire nuts, mounting plate)
  • Instruction Manual

Note: Bulb is NOT included.

Setup and Installation

This fixture is designed for easy installation and comes with all necessary mounting hardware. No need to install glass components separately.

  1. Turn off Power: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker.
  2. Prepare Mounting Surface: Ensure the wall surface is clean and suitable for mounting.
  3. Attach Mounting Plate: Secure the mounting plate to the junction box using the provided screws.
  4. Make Electrical Connections: Connect the fixture's wires to your household wiring according to standard electrical codes (black to black, white to white, ground to ground). Use wire nuts to secure connections.
  5. Mount Fixture: Carefully align the fixture with the mounting plate and secure it with the provided screws.
  6. Install Bulb: Insert one E26 base bulb (Max. 60W) into the socket. (Bulb not included).
  7. Restore Power: Turn the power back on at the circuit breaker.
Installation steps for Emliviar outdoor wall light

Image: Visual representation of the Emliviar outdoor wall light, highlighting easy installation, aluminum frame, hard-wired connection, and water grain glass.

Operating Instructions

The Emliviar Outdoor Wall Lantern Sconce is hard-wired and operates via a standard wall switch (not included). It requires one E26 base bulb.

  • Bulb Type: Compatible with LED, Incandescent, or CFL bulbs.
  • Maximum Wattage: Do not exceed 60 watts for the bulb.
  • Power On/Off: Use your existing wall switch to turn the light fixture on or off.
Bulb requirements for Emliviar outdoor wall light

Image: Diagram showing bulb compatibility (Max 60W, CFL, LED, Halogen) and E26 base, with a note that the bulb is not included.

Maintenance

This fixture is weather-resistant and rust-resistant, designed for outdoor use. Regular cleaning will help maintain its appearance and performance.

  • Cleaning: Wipe the fixture with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or glass.
  • Bulb Replacement: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal.
  • Inspection: Periodically check for any loose connections or signs of wear.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on.
  • Power is off at the circuit breaker.
  • Bulb is faulty or not installed correctly.
  • Loose wiring connection.
  • Check the circuit breaker and ensure power is on.
  • Replace the bulb or ensure it is screwed in tightly.
  • Turn off power, then check and secure all wire connections.
Light flickers.
  • Loose bulb.
  • Incorrect bulb type or wattage.
  • Loose wiring connection.
  • Tighten the bulb.
  • Ensure the bulb is E26 base and max 60W.
  • Turn off power, then check and secure all wire connections.

Specifications

Feature Detail
Brand Emliviar
Model Number WE215BM BK
Dimensions (L x W x H) 9" x 13.15" x 25"
Back Plate Dimensions (W x H) 5.3" x 13.8"
Material Aluminum, Water Grain Glass
Finish Black
Power Source AC (Hard-wired)
Voltage 120 Volts
Bulb Base E26
Max Wattage 60W
Light Source Compatibility LED, Incandescent, CFL
Indoor/Outdoor Usage Outdoor (Wet Location Rated)
Special Features Weather-resistant, Rust-resistant
Certification ETL Listed
Detailed dimensions of the Emliviar outdoor wall lantern

Image: Product dimension diagram showing length, width, and height measurements of the Emliviar outdoor wall light.

Product Video

Video: An official product video from Emliviar showcasing the features and design of the 25 Inch Outdoor Wall Light (Model WE215BM BK).

Warranty

This Emliviar product comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Emliviar customer support. Visit the official Emliviar website for contact information or refer to your purchase documentation.

Online Support: Visit the Emliviar Store on Amazon

© 2024 Emliviar. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.