WZYBUTA 7R 230W Moving Head Beam Stage Light User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your WZYBUTA 7R 230W Moving Head Beam Stage Light. Please read these instructions carefully before installation, operation, or maintenance. Retain this manual for future reference.

2. Safety Instructions

To prevent electric shock, fire, or injury, always follow these basic safety precautions:

• Electrical Safety: Ensure the power supply voltage matches the device's requirements (240V AC). Always connect to a grounded outlet. Disconnect power before any service or maintenance.
• Installation: Mount the fixture securely using appropriate hardware. Ensure adequate ventilation around the unit to prevent overheating. Do not operate in wet or damp locations.
• Eye Protection: Avoid direct eye exposure to the light source. The intense light can cause eye damage.
• Maintenance: Refer all servicing to qualified personnel. Do not attempt to repair the unit yourself.
• Operating Environment: Do not operate the fixture near flammable materials. Maintain a safe distance from people and objects.

3. Package Contents

Verify that all components are present and in good condition upon unpacking:

• 2 x WZYBUTA 7R 230W Moving Head Beam Stage Light fixtures
• 2 x Power Cords (1.2m each)
• 2 x DMX Cables
• 4 x Mounting Hooks
• 1 x User Manual

Figure 3.1: Product and included accessories. Each light comes with one power cord, one DMX cable, and two mounting hooks.

4. Product Features

The WZYBUTA 7R 230W Moving Head Beam Stage Light offers a range of dynamic lighting effects:

• Light Source: 7R 230W Discharge Lamp (Non-LED)
• Optical System: High-precision optical lens for large diameter light output, high brightness, and clear patterns.
• Gobo Wheel: 17 static gobos + open white, with shake effect.
• Color Wheel: 14 dichroic colors + open white, with rainbow effect and half-color adjustment.
• Prism: 8-facet rotating prism, forward and backward rotation with prism positioning function.
• Strobe: Variable electronic strobe (1-25 flashes per second).
• Dimmer: Smooth electronic dimming.
• Pan/Tilt Movement: X-axis (Pan) 540°, Y-axis (Tilt) 270° with 160-bit precision scanning.
• Control Modes: DMX512, Auto, Sound Activated, Master-Slave.
• Cooling: Integrated fan system for efficient heat dissipation and extended lamp life.
• Construction: Durable aluminum alloy and ABS housing.

Figure 4.1: Overview of light effects and control options.

Figure 4.2: Examples of color changes and gobo patterns.

5. Setup

Follow these steps to set up your moving head beam light:

1. Unpacking: Carefully remove the fixture and all accessories from the packaging. Inspect for any damage during transit.
2. Mounting: The fixture can be mounted in various orientations (truss, wall, floor). Use the provided mounting hooks to secure the light to a truss or suitable structure. Ensure the mounting surface can support the weight of the fixture. For floor placement, ensure it is on a stable, level surface.
3. Power Connection: Connect the included power cord to the 'POWER IN' socket on the rear of the fixture and then to a grounded power outlet.
4. DMX Connection (Optional): If using DMX control, connect a DMX cable from your DMX controller's 'DMX OUT' to the fixture's 'DMX IN' port. For multiple fixtures, daisy-chain them by connecting the first fixture's 'DMX OUT' to the second fixture's 'DMX IN', and so on.

Figure 5.1: Rear panel connections including DMX and power.

Figure 5.2: Product dimensions for installation planning.

6. Operating Instructions

The WZYBUTA 7R 230W Moving Head Beam Stage Light offers four primary control modes:

• DMX512 Control: Connect the fixture to a DMX controller. The light uses 16 DMX channels. Refer to the DMX channel chart (usually provided separately or on the product display) for specific control functions such as Pan, Tilt, Color, Gobo, Prism, Strobe, and Dimmer. Adjust the DMX address on the fixture's display panel to match your controller's settings.
• Automatic Mode: The fixture will run through pre-programmed light sequences automatically. Select this mode via the display panel.
• Sound Activated Mode: The light will react to ambient sound or music, changing patterns and colors in sync with the beat. Select this mode via the display panel.
• Master-Slave Mode: Connect multiple fixtures via DMX cables. Set one fixture as the 'Master' and the others as 'Slave'. The slave units will mirror the master unit's movements and effects.

Pan and Tilt Movement: The fixture offers a wide range of motion with 540° pan (horizontal) and 270° tilt (vertical) movement. Fine adjustments for X/Y axis can be made through the DMX control channels.

Figure 6.1: Pan (540°) and Tilt (270°) movement range.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your fixture:

• Cleaning: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspection: Regularly check all cables, connections, and mounting hardware for signs of wear or damage. Replace any damaged components immediately.
• Ventilation: Ensure the cooling fan and ventilation openings are free from dust and obstructions to maintain proper airflow.
• Lamp Replacement: The 7R 230W discharge lamp has a limited lifespan. Refer to a qualified technician for lamp replacement. Always use the specified lamp type.

8. Troubleshooting

If you encounter issues, consult the following table before contacting support:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the retailer or manufacturer's official website. Keep your purchase receipt as proof of purchase.