EUGAD Bar Stool Set of 2 Instruction Manual

1. Introduction

Thank you for choosing the EUGAD Bar Stool Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Designed for comfort and versatility, these stools feature height adjustment, 360-degree swivel, an ergonomic backrest, and a sturdy footrest, all upholstered in soft velvet.

Image: The EUGAD Bar Stool Set in Grey.

2. Safety Information

Please read and understand all safety warnings before assembly and use.

• Maximum Weight Capacity: The maximum weight capacity for each stool is 120 kg (approximately 265 lbs). Do not exceed this limit.
• Stable Surface: Always place the bar stool on a stable and flat surface to prevent the risk of tipping or falling.
• Children and Pets: Keep children and pets away from the assembly area. Small parts can be a choking hazard.
• Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
• Proper Use: Do not stand on the stool or use it for purposes other than its intended use as seating.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact EUGAD customer support.

• Seat (2x)
• Gas Lift Cylinder (2x)
• Base (2x)
• Footrest Ring (2x)
• Mounting Hardware (screws, washers, Allen key)
• Instruction Manual

Image: Exploded view of bar stool components and features.

4. Setup and Assembly

Assembly of the EUGAD Bar Stool is designed to be straightforward. Follow the illustrated step-by-step instructions provided in the package. All necessary assembly tools and hardware are included.

1. Attach the Seat: Secure the seat to the top plate of the gas lift mechanism using the provided screws. Ensure all screws are tightened firmly.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the base.
3. Attach Footrest: Slide the footrest ring onto the gas lift cylinder, ensuring it is oriented correctly and secured if applicable.
4. Connect Seat to Base: Carefully place the assembled seat onto the top of the gas lift cylinder. Apply gentle pressure to secure it.
5. Final Check: Verify that all connections are secure and the stool is stable before use.

Image: Illustrating the assembly process.

5. Operating Instructions

Your EUGAD Bar Stool is designed for ease of use and comfort.

• Height Adjustment: To adjust the height, locate the lever under the seat. While seated, pull the lever up to lower the stool. To raise the stool, stand up slightly and pull the lever up; the gas lift will extend. Release the lever at your desired height. The height is adjustable between 62 cm and 84 cm.
• 360° Swivel: The stool seat can freely rotate 360 degrees, allowing for easy movement and conversation without needing to reposition the entire stool.

Image: Detail of the height adjustment lever.

6. Care and Maintenance

Proper care will extend the life and appearance of your bar stools.

• Cleaning Velvet Upholstery: For general cleaning, gently vacuum the velvet fabric to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not rub vigorously.
• Cleaning Metal Parts: Wipe metal parts with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Preventing Scratches: The base includes an anti-slip ring to protect your floor. Ensure this ring is clean and free of debris to prevent scratching.
• Regular Inspection: Periodically inspect all components, especially the gas lift and base, for any signs of wear or damage.

7. Troubleshooting

If you encounter any issues with your bar stool, refer to the following common problems and solutions:

• Stool is Wobbly:
  • Ensure all assembly screws are fully tightened.
  • Check that the stool is on a flat, even surface.
• Height Adjustment Not Working:
  • Ensure the gas lift cylinder is correctly inserted into the base and seat mechanism.
  • Check for any obstructions around the lever mechanism.
  • If the gas lift is faulty, it may need replacement. Contact customer support.
• Squeaking Noises:
  • Tighten all screws.
  • Apply a small amount of silicone spray to moving parts if the noise persists, avoiding contact with fabric.

8. Product Specifications

Image: Detailed dimensions of the bar stool.

9. Warranty and Support

EUGAD products are manufactured with quality and customer satisfaction in mind. For any questions, concerns, or warranty claims, please contact EUGAD customer support through your purchase platform or the official EUGAD website. Please have your model number (1006BY-2) and purchase details ready when contacting support.

For more information, visit the EUGAD Store on Amazon.