Introduction
Thank you for choosing the VGR V-331 Professional Men's Shaver. This manual provides essential information for the safe and effective use, maintenance, and care of your new shaver. Please read these instructions thoroughly before first use and retain them for future reference.
Product Features
- Double Foil Premium Blade: Features a high-strength, ultra-thin metal net slice combined with an ultra-thin reciprocating floating blade for a speedy, close, and clean shave.
- USB Rechargeable: Equipped with a USB Type-C charging port for convenient recharging. A full charge takes approximately 8 hours and provides up to 50 minutes of continuous use.
- IPX4 Waterproof: Designed for both comfortable dry shaving and refreshing wet shaving with cream or gel. The shaver is fully washable under running water for easy cleaning.
- Sensitive Skin Design: Engineered to reduce friction, providing a smooth shave without irritation, adapting to facial contours.
- Compact and Portable: Slim, pocket-sized design for easy portability, ideal for home use or travel.
- Powerful Motor: Ensures quick and efficient shaving performance.
Package Contents
Upon unpacking, please ensure all the following items are present:
- VGR V-331 Shaver
- Type-C Charging Cable
- Storage Bag
- Hair Cleaning Brush
- Replacement Shaver Head
- User Manual Book (this document)
Setup
Charging the Shaver
Before first use, fully charge the shaver. Ensure the shaver is turned off during charging.
- Locate the USB Type-C charging port on the shaver.
- Connect the provided Type-C charging cable to the shaver's port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, USB wall adapter).
- The charging indicator light will illuminate. A full charge takes approximately 8 hours.
- Once fully charged, disconnect the shaver from the power source.
Image: Charging specifications for the VGR V-331 shaver, showing 600mAh battery, 8 hours charge time, and 50 minutes work time.
Image: Overview of the VGR V-331 shaver's key components, including the protection cap, ON/OFF switch, dual independent flexing foils, and USB charging port.
Operating Instructions
General Shaving Tips
- For best results, shave before washing your face.
- Ensure your skin is clean and dry for a dry shave, or apply shaving cream/gel for a wet shave.
Using the Shaver
- Remove the protective cap from the shaver head.
- Press the ON/OFF switch to turn on the shaver.
- Hold the shaver at a right angle (90 degrees) to your skin.
- Stretch your skin with your free hand to make the hairs stand upright.
- Move the shaver slowly against the direction of hair growth, using light pressure. The floating foils will adapt to your facial contours.
- After shaving, press the ON/OFF switch to turn off the shaver.
- Replace the protective cap to prevent damage to the foils.
Image: Illustration of the VGR V-331 shaver's professional blades and independent floating shaving system for effective hair removal.
Image: Front view of the VGR V-331 Professional Men's Shaver, showcasing its design.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your shaver.
Daily Cleaning (After Each Use)
- Turn off the shaver.
- Remove the shaver head by gently pulling it upwards.
- Tap the shaver head gently to remove loose hair.
- Use the provided cleaning brush to brush away any remaining hair from the foils and the shaver body.
- Rinse the shaver head and the inner part of the shaver under running tap water. Ensure no water enters the charging port.
- Allow all parts to air dry completely before reattaching the shaver head and replacing the protective cap.
Image: The VGR V-331 shaver with its detachable head, illustrating how it can be easily removed for cleaning.
Replacing the Shaver Head
For optimal shaving performance, it is recommended to replace the shaver head every 6-12 months, depending on usage. A replacement shaver head is included in your package.
- Ensure the shaver is turned off and disconnected from any power source.
- Gently pull the old shaver head upwards to remove it.
- Align the new shaver head with the shaver body and press down gently until it clicks into place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver for 8 hours. |
| Poor shaving performance. | Shaver head is dirty or worn. | Clean the shaver head thoroughly. If performance does not improve, replace the shaver head. |
| Shaver pulls hair. | Shaver head is worn or damaged. | Replace the shaver head. Ensure the shaver is fully charged. |
| Irritation after shaving. | Incorrect shaving technique or sensitive skin. | Ensure you are shaving against the grain with light pressure. Consider using a wet shave with shaving cream/gel. If irritation persists, consult a dermatologist. |
Specifications
- Model: VGR V-331
- Power Source: Battery Powered (1 Lithium Ion battery included)
- Battery Capacity: 600 mAh (Ni-MH)
- Charge Time: Approximately 8 hours
- Runtime: Up to 50 minutes
- Waterproof Rating: IPX4 (Fully washable)
- Blade Material: Stainless Steel
- Product Dimensions (LxWxH): 11 x 6 x 2 cm
- Item Weight: 50 g
- Color: Black
Warranty and Support
The VGR V-331 Professional Men's Shaver comes with a 12-month quality warranty from the date of purchase.
If you encounter any issues or are not satisfied with this product, please contact VGR customer care for assistance. Our customer service team aims to respond within 24 hours to provide a satisfactory resolution.
Contact Information:
- Email: customercare@vgrofficial.in
- Phone: 9667796740
- Website: www.vgrofficial.in
- Operating Hours: 10:00 AM to 6:00 PM, Monday to Saturday
