Skechers Women's Crenshaw Silicone Digital Watch SR2132 User Manual

Introduction

This manual provides comprehensive instructions for the Skechers Women's Crenshaw Silicone Digital Watch, Model SR2132. Please read this manual carefully to ensure proper use and maintenance of your watch. This digital watch features time display, date, and stopwatch functionality.

Figure 1: Front view of the Skechers Crenshaw Digital Watch (Model SR2132).

Watch Components

Familiarize yourself with the buttons on your watch:

• LIGHT Button: Activates the backlight.
• MODE Button: Cycles through different modes (Time, Stopwatch, Alarm).
• START Button: Used to start/stop functions in stopwatch mode, or adjust settings.
• RESET Button: Used to reset functions in stopwatch mode, or adjust settings.

Figure 2: Side view illustrating the watch buttons.

Setup

Setting Time and Date

1. In normal time display mode, press the MODE button three times to enter time setting mode. The seconds will begin to flash.
2. Press the RESET button to set the seconds to zero.
3. Press the START button to move to the hour setting.
4. Press the RESET button to adjust the hour. Pay attention to AM/PM indicators if present.
5. Press the START button to move to the minute setting.
6. Press the RESET button to adjust the minutes.
7. Continue pressing START to cycle through year, month, and day settings, adjusting each with the RESET button.
8. Once all settings are complete, press the MODE button to return to normal time display.

Operating Instructions

Using the Backlight

Press the LIGHT button to illuminate the display for a few seconds. This is useful in low-light conditions.

Using the Stopwatch

1. From normal time display, press the MODE button once to enter stopwatch mode. The display will show "00:00:00".
2. Press the START button to begin timing.
3. Press the START button again to pause timing.
4. Press the RESET button to clear the stopwatch to "00:00:00".
5. To resume timing after pausing, press the START button.
6. To exit stopwatch mode, press the MODE button.

Setting and Using the Alarm

1. From normal time display, press the MODE button twice to enter alarm setting mode. The hour digits will flash.
2. Press the RESET button to adjust the alarm hour.
3. Press the START button to move to the minute setting.
4. Press the RESET button to adjust the alarm minutes.
5. Press the MODE button to confirm the alarm setting and return to normal time display.
6. To activate/deactivate the alarm, in normal time display, press and hold the RESET button, then press the START button. An alarm icon will appear/disappear on the display.

Maintenance

Water Resistance

This watch is water resistant to 50 meters (5 ATM / 165 feet). This means it is suitable for short periods of recreational swimming and showering. It is not suitable for diving or snorkeling. Do not operate buttons while the watch is wet or submerged, as this can compromise the water resistance.

Cleaning

To clean your watch, wipe it with a soft, dry cloth. For silicone bands, a damp cloth with mild soap can be used, followed by thorough drying. Avoid using harsh chemicals or abrasive materials.

Battery Replacement

The watch uses 1 Lithium Ion battery (included). When the display becomes dim or functions become erratic, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). If the issue persists, the battery may be low, or there could be an internal malfunction.
• Time is incorrect: Re-set the time following the "Setting Time and Date" instructions. Ensure AM/PM is correctly set.
• Water inside the watch: Immediately cease use and take the watch to a qualified technician. Water damage is typically not covered under warranty.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Skechers website. You can also visit the Skechers Store on Amazon for more product details and support resources.

Figure 3: Skechers product packaging.