1. Introduction
The CAMRY CR 1150 is a versatile alarm clock designed for clear time, date, and room temperature display. This device offers multiple alarm settings and can be powered via USB or batteries, providing flexibility for various environments. This manual details the setup, operation, and maintenance of your CR 1150 alarm clock.
Image 1.1: The CAMRY CR 1150 Alarm Clock displaying time, reflecting a modern workspace.
2. Package Contents
Please verify that all items are present in the package:
- CAMRY CR 1150 Alarm Clock
- USB Power Cable
- 3 x AAA Batteries
3. Product Overview
Familiarize yourself with the buttons and features of your alarm clock:
Image 3.1: Top view of the alarm clock, highlighting the control buttons.
- MODE Button: Used to cycle through time, date, and alarm settings.
- SNZ/LIGHT Button: Activates snooze function during an alarm; adjusts display brightness/backlight.
- UP Button: Increases values during setting; navigates menus.
- DOWN Button: Decreases values during setting; navigates menus.
- ALARM Button: Used to set and activate/deactivate alarms.
Image 3.2: Angled view of the alarm clock, showing the clear digital display.
4. Setup
4.1 Powering the Device
The CAMRY CR 1150 alarm clock can be powered by either the included USB cable or AAA batteries.
Image 4.1: Rear view of the alarm clock, showing the battery compartment and USB input.
USB Power:
- Connect the small end of the USB cable to the DC 5V port on the back of the alarm clock.
- Connect the larger end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
Battery Power:
- Open the battery compartment cover on the back of the alarm clock.
- Insert 3 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Note: Using both USB and battery power simultaneously is possible. Batteries can serve as a backup in case of power outage when using USB power.
5. Operating Instructions
5.1 Setting Time
- Press the MODE button once to enter time setting mode. The hour digits will flash.
- Use the UP or DOWN buttons to adjust the hour.
- Press MODE again to set the minutes. The minute digits will flash.
- Use the UP or DOWN buttons to adjust the minutes.
- Press MODE a third time to confirm and exit time setting mode.
5.2 Setting Date
- From normal display mode, press the MODE button twice to enter date setting mode. The year digits will flash.
- Use the UP or DOWN buttons to adjust the year.
- Press MODE to set the month.
- Use the UP or DOWN buttons to adjust the month.
- Press MODE to set the day.
- Use the UP or DOWN buttons to adjust the day.
- Press MODE a final time to confirm and exit date setting mode.
5.3 Setting Alarm
The device supports 3 alarm modes.
- Press the ALARM button once to enter alarm setting mode. The alarm hour digits will flash.
- Use the UP or DOWN buttons to adjust the alarm hour.
- Press ALARM again to set the alarm minutes. The minute digits will flash.
- Use the UP or DOWN buttons to adjust the alarm minutes.
- Press ALARM a third time to confirm the alarm time.
- To activate or deactivate the alarm, press the ALARM button repeatedly in normal display mode until the alarm icon appears (activated) or disappears (deactivated).
5.4 Snooze Function
When the alarm sounds, press the SNZ/LIGHT button to activate the snooze function. The alarm will pause for a preset duration (1 to 60 minutes, adjustable) and sound again after the snooze period. To stop the alarm completely, press any other button.
5.5 Room Temperature Display
The alarm clock automatically displays the ambient room temperature. This feature is always active and does not require manual setting.
Image 5.1: The alarm clock displaying room temperature.
5.6 Display Brightness / Backlight
Press the SNZ/LIGHT button in normal display mode to adjust the brightness of the LED display. Cycle through available brightness levels to suit your preference.
6. Maintenance
6.1 Cleaning
To clean the alarm clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.
6.2 Battery Replacement
If using battery power, replace all three AAA batteries when the display dims or the clock functions become erratic. Ensure correct polarity when inserting new batteries.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock runs slow or loses time. | Low battery power; internal clock synchronization issue. | Replace batteries or ensure stable USB power. Reset the time. |
| Display is dim or not visible. | Low battery power; brightness setting too low; no power. | Replace batteries or connect to USB power. Press SNZ/LIGHT to adjust brightness. |
| Alarm does not sound. | Alarm not activated; alarm volume too low (if adjustable); incorrect alarm time. | Ensure alarm icon is displayed. Verify alarm time settings. |
| Buttons are unresponsive. | Temporary software glitch; low power. | Remove and reinsert batteries, or disconnect and reconnect USB power to reset the device. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CR 1150 |
| Dimensions (L x W x H) | 8.3 x 3.81 x 8.3 cm |
| Weight | 160 g |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Power Source | 3 x AAA Batteries (included) or USB (cable included) |
| Display Type | Digital LED |
| Special Features | 3 Alarm Modes, Date Display, Room Temperature Indicator, Snooze Function |
Image 8.1: Dimensions of the CAMRY CR 1150 Alarm Clock.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
