VINGLI Rattan Nightstand with Charging Station

1. Safety Information

Please read all safety instructions carefully before assembly and use. Retain this manual for future reference.

• Weight Limits: Do not exceed a weight of 121 lbs (55 kg) for the tabletop. Each drawer has a maximum weight capacity of 44 lbs (20 kg). Exceeding these limits may cause structural damage or injury.
• Anti-Tip Anchor: Properly anchor the nightstand to the wall using the included anti-tip bracket. This prevents accidental tipping, especially important in households with children or pets.
• Assembly Caution: Assembly involves small parts and tools. Keep all components out of reach of children during assembly to prevent choking hazards. Adult supervision is recommended.
• Electrical Safety: Ensure the power cord is not pinched or damaged. Do not overload the electrical outlets. Disconnect from power before cleaning or if the charging station is damaged.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Nightstand Panels (Top, Sides, Bottom, Back)
• Drawer Components (Fronts with Rattan, Sides, Back, Bottom)
• Legs with Brass Caps
• Charging Station (Pre-installed in top panel)
• Hardware Kit (Screws, dowels, drawer slides, anti-tip anchor, brushed brass knobs, brushed brass feet)
• Assembly Instruction Manual

3. Setup and Assembly Instructions

This nightstand requires assembly. All necessary tools are included. Follow the detailed steps provided in the separate assembly instruction manual for proper construction.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Refer to the included assembly instruction manual to identify each part and hardware piece. All pieces are labeled.
3. Assemble Frame: Follow the step-by-step diagrams in the manual to assemble the main frame of the nightstand. Ensure all connections are secure.
4. Install Drawer Slides: Attach the metal ball bearing drawer slides to the nightstand frame and drawer sides as indicated in the instructions.
5. Assemble Drawers: Construct the three drawers, attaching the rattan fronts and brushed brass knobs. Insert the assembled drawers into the nightstand frame.
6. Attach Legs: Securely fasten the solid wood legs with brass caps to the bottom of the nightstand.
7. Install Anti-Tip Anchor: For safety, attach the anti-tip wall anchor to the back of the nightstand and to a wall stud using the provided hardware.

Image: Key components including the anti-tip wall anchor, brushed brass knobs, brushed brass feet, and solid drawer panel.

4. Operating Instructions

4.1. Charging Station

The nightstand features a recessed power strip on the top surface for convenient device charging.

• Power Connection: Plug the nightstand's 4.9 ft (1.5 m) power cord into a standard wall outlet.
• USB Charging: Use the two integrated USB ports to charge compatible devices such as cell phones, tablets, and other USB-powered electronics.
• AC Outlets: Utilize the two standard AC outlets for powering lamps, alarm clocks, or other small appliances.

Image: The integrated charging station on the nightstand's top surface, showing USB and AC outlets in use.

4.2. Drawer Usage

The nightstand includes three spacious drawers for storage.

• Opening/Closing: Gently pull the brushed brass knobs to open the drawers. The metal ball bearing tracks ensure smooth and quiet operation.
• Storage: Use the drawers to store personal items, books, or other bedside essentials. Each drawer measures 15" (W) x 11.2" (D) x 4.3" (H).

Image: An open drawer revealing its interior and the smooth ball bearing drawer slides.

5. Maintenance

Proper care will extend the life and appearance of your nightstand.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish. For the rattan, use a soft brush to remove dust.
• Spills: Immediately wipe up any spills to prevent staining or damage to the wood and rattan.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure, which can cause fading or discoloration of the wood and rattan.
• Hardware: Periodically check and tighten any loose screws or hardware to maintain stability.

6. Troubleshooting

If you encounter any issues, refer to the following common solutions:

7. Specifications

Detailed product specifications for the VINGLI Rattan Nightstand (Model N0RMCM).

Image: Product dimensions and weight capacities.

• Brand: VINGLI
• Model: N0RMCM
• Product Dimensions (D x W x H): 15.7" x 18.9" x 27" (40 cm x 48 cm x 68.5 cm)
• Item Weight: 33 lbs (15 kg)
• Maximum Weight Recommendation: Tabletop: 121 lbs (55 kg), Each Drawer: 44 lbs (20 kg)
• Frame Material: Engineered Wood, Metal
• Drawer Front Material: Natural Rattan
• Color: Black (for this variant)
• Number of Drawers: 3
• Charging Station: 2 AC Outlets, 2 USB Ports, 4.9 ft (1.5 m) Power Cord
• Assembly Required: Yes

8. Warranty Information

The VINGLI Rattan Nightstand (Model N0RMCM) is covered by a 3-Year Quality Warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from misuse, accident, unauthorized modification, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

9. Customer Support

For any questions, assistance with assembly, missing parts, or warranty claims, please contact VINGLI customer service. We are committed to providing professional support and typically respond within 24 hours.

Contact Information:

• Email: support@vingli.com (Example email, please refer to your purchase documentation for actual contact details)
• Website: Visit the VINGLI Store on Amazon