Himimi Gaming Desk 160x75 cm Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Himimi Gaming Desk 160x75 cm. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.

Safety Information

• The maximum load capacity of the desk is 130 kg. Do not exceed this weight limit.
• Assembly requires two people for safe handling and installation.
• Ensure all screws are tightened completely before use to maintain stability.
• Place the desk on a flat, stable surface. Use the adjustable feet to level the desk if necessary.
• Keep liquids away from electronic equipment on the desk. The carbon fiber surface is waterproof, but electronics are not.
• Avoid sharp objects on the desk surface to prevent scratches, despite its anti-scratch properties.

Package Contents

Please verify that all components are present before beginning assembly.

• Desk tabletop (carbon fiber surface, 2 pieces)
• Desk legs (2 pieces, T-shaped)
• Transversal bars (2 pieces, A and B)
• Inclined support rods (2 pieces)
• Headphone hook
• Cup holder
• Gaming handle rack
• Cable management box
• Adjustable feet (4 pieces)
• Large mouse pad
• Assembly hardware (screws, washers, tools)
• Instruction manual

Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for this process.

Step 1: Install Transversal Bars

Connect the two transversal bars (A and B) at the groove. Secure them with screws. Ensure the two bars are different, one having protrusions.

Image description: A diagram illustrating the connection of two transversal bars, labeled A and B, with screws.

Step 2: Attach Transversal Bars to Legs

Adjust the two table legs to ensure they are straight. Then, fix the installed transversal bars to the table legs. Fully tighten the screws.

Image description: A diagram showing the desk frame with two legs and the connected transversal bars, indicating where to attach them.

Step 3: Install Inclined Support Rods

Install the inclined support rods. The orientation of both rods should be the same. When installing the rod on the other side, it must be rotated for proper installation. Fully tighten the screws.

Image description: A diagram illustrating the attachment of inclined support rods to the desk frame.

Step 4: Prepare the Desktop

Place a layer of foam paper on the floor first. Then, place the carbon fiber desktop pieces on the foam paper to protect the desk surface during assembly.

Image description: A diagram showing the two carbon fiber desktop pieces, highlighting the importance of placing foam underneath for protection.

Step 5: Connect Desktop Pieces

Install the two iron pieces to connect the carbon fiber desktop sections.

Image description: A diagram showing how two desktop pieces are joined together using metal plates and screws.

Step 6: Attach Desktop to Frame

With the help of two people, carefully flip the table legs and align them with the pre-drilled holes on the desktop. Secure the desktop to the frame by fully tightening all screws.

Image description: A diagram illustrating two people carefully flipping the assembled desk frame onto the desktop, emphasizing the need for two people.

Step 7: Install Cable Management Box

Install the cable management box. Fix the clip and the frame with two S4 screws. After fixing the left and right sides, install it under the desk.

Image description: A diagram showing the cable management box being installed underneath the desk.

Step 8: Install Accessories

Install the cup holder, headphone hook, and the four adjustable feet.

Image description: A close-up image highlighting the cup holder, headphone hook, adjustable feet, and gaming handle rack.

Step 9: Final Touches

Cover the desk with the large mouse pad. Install the two wire management grommets into the desktop holes.

Image description: The Himimi Gaming Desk with the large mouse pad covering the surface and showing the cable holes.

Installation Video

Video description: A short preview video demonstrating the assembly process of the Himimi Gaming Desk.

Operating Instructions

Cable Management

Utilize the two cable holes on the desktop and the dedicated cable management box underneath to organize your power cords and other cables. This helps maintain a clean and tidy workspace.

Image description: A view of the desk highlighting the cable holes and the dedicated cord collector underneath, showing how cables can be neatly managed.

Using Accessories

• Headphone Hook: Hang your gaming headset on the integrated hook to save desk space and keep it easily accessible.
• Cup Holder: Place your beverage in the cup holder to prevent spills and keep it within reach.
• Gaming Handle Rack: Store your game controllers on the rack for organized access.
• Adjustable Feet: Use the adjustable feet to ensure the desk is stable and level on uneven surfaces.

Maintenance

Cleaning the Desktop

The carbon fiber surface is waterproof and anti-scratch. For cleaning, wipe the surface with a damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.

Image description: A close-up image showing water droplets on the carbon fiber surface and a hand wiping it clean, demonstrating its waterproof and easy-to-clean properties.

General Care

• Regularly check all screws and connections to ensure they remain tight.
• Avoid placing extremely hot items directly on the desk surface without protection.
• Do not drag heavy objects across the desk surface to prevent potential damage.

Troubleshooting

Desk is Unstable

• Ensure all assembly screws are fully tightened.
• Adjust the leveling feet at the bottom of the desk legs to compensate for uneven floor surfaces.
• Verify that the inclined support rods are correctly installed and secured.

Cables are Disorganized

• Utilize the integrated cable holes and the cable management box to route and conceal wires.
• Consider using additional cable ties or sleeves for a tidier setup.

Specifications

Warranty and Support

Himimi offers a 3-year free warranty for this gaming desk. If you encounter any quality issues, we provide free replacement accessories or tables. Our customer support team is available 24 hours a day to assist you.

For support, please contact your retailer or visit the official Himimi website.