Miroir M700S 1080p Portable Projector User Manual

1. Introduction

The Miroir M700S is a portable 1080p projector designed for home theater and gaming. It features built-in streaming capabilities, HDR support, Dolby and DTS audio, a built-in speaker, 5G WiFi, and Bluetooth connectivity. Engineered for longevity, its LED lamp offers an impressive lifespan of up to 20,000 hours in Normal Mode and 30,000 hours in ECO Mode. This manual provides comprehensive instructions for setting up, operating, and maintaining your Miroir M700S projector.

2. Safety Information

Please read all safety instructions carefully before using the Miroir M700S projector. Keep this manual for future reference.

Electrical Safety: Do not expose the projector to rain or moisture. Do not open the casing; refer all servicing to qualified personnel. Ensure the power adapter is compatible with your local power supply.
Heat and Ventilation: Ensure adequate ventilation around the projector. Do not block ventilation openings. Avoid placing the projector on soft surfaces that may block airflow.
Eye Safety: Do not look directly into the projector lens when the lamp is on. The bright light can cause eye damage.
Battery Safety: The projector contains a built-in rechargeable battery. Do not expose the battery to excessive heat or direct sunlight. Do not attempt to replace the battery yourself.
Placement: Place the projector on a stable, level surface. Avoid placing it in direct sunlight or near heat sources.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. What's in the Box

Upon opening the package, verify that all the following items are included:

Miroir M700S Projector
Remote Control
AC Adapter
HDMI Cable
User Manual (this document)

4. Product Overview

Familiarize yourself with the various components and ports of your Miroir M700S projector.

Figure 4.1: Top view of the Miroir M700S projector, showing the sleek black casing and Miroir logo.

Figure 4.2: Front view of the Miroir M700S projector, highlighting the projection lens and ventilation grille.

Figure 4.3: Rear view of the Miroir M700S projector, displaying all available input/output ports.

4.1. Ports and Connections

Audio Out (3.5mm): Connect external speakers or headphones for enhanced audio.
USB Ports (x2): For connecting USB storage devices or other peripherals.
HDMI Port: Connect devices such as laptops, gaming consoles, or Blu-ray players. Supports HDR input.
DC IN: Power input for the AC adapter.
LAN (RJ45): For wired network connection.
Power Button: To turn the projector on or off.

Figure 4.4: The remote control for the Miroir M700S projector, showing various navigation and function buttons.

4.2. Remote Control Functions

The included remote control allows for easy navigation and control of the projector's features.

Power Button: Turns the projector on/off.
Navigation Pad: Used to move through menus and select options.
Back Button: Returns to the previous screen or menu.
Home Button: Returns to the main home screen.
Volume Buttons (+/-): Adjusts the audio volume.
Settings Button: Accesses the projector's settings menu.
Source Button: Selects input source (HDMI, internal streaming).

5. Setup

5.1. Initial Power On

Connect the AC adapter to the DC IN port on the projector and plug it into a power outlet.
Press the Power button on the projector or the remote control to turn it on.
The projector will boot up and display the home screen.

5.2. Focus and Keystone Adjustment

The Miroir M700S features automatic keystone correction. If the image appears distorted (trapezoidal), the projector will attempt to correct it automatically.

Automatic Keystone: The projector should automatically adjust the image shape. If it does not, try restarting the projector or checking for firmware updates.
Manual Keystone: If automatic correction is insufficient, navigate to the settings menu to manually adjust the keystone. This allows you to fine-tune the image to be perfectly rectangular.
Focus: Adjust the focus manually using the focus ring or controls on the projector until the image is sharp and clear.

5.3. Network Connection

Connect your projector to the internet for streaming and updates.

Wi-Fi Connection:
1. From the home screen, navigate to Settings.
2. Select Network or Wi-Fi Settings.
3. Choose your desired Wi-Fi network from the list.
4. Enter the Wi-Fi password using the on-screen keyboard and confirm.
Wired (LAN) Connection:
1. Connect an Ethernet cable from your router or network switch to the LAN (RJ45) port on the projector.
2. The projector should automatically detect and connect to the wired network.

5.4. Connecting External Devices

HDMI: Connect your laptop, gaming console, or other HDMI-enabled device to the HDMI port. Select the HDMI input source using the remote control.
USB: Insert a USB flash drive or external hard drive into one of the USB ports to access media files.
Bluetooth: Pair Bluetooth headphones or speakers for wireless audio. Navigate to Bluetooth settings in the menu, enable Bluetooth, and select your device to pair.

6. Operating the Projector

6.1. Navigating the Interface

The Miroir M700S features an intuitive interface. Use the navigation pad and select button on the remote to browse through menus, applications, and settings. The Home button will always return you to the main screen.

6.2. Streaming Applications (SYNQ TV)

The projector comes with SYNQ TV, providing access to various streaming services.

Access the SYNQ TV app from the home screen.
Log in to your accounts for services like Netflix, HBO Max, Prime Video, etc.
Note: Some users have reported issues with certain streaming apps or login processes. Ensure your projector's firmware is up to date for optimal performance.

Figure 6.1: The SYNQ TV interface showing various streaming application logos.

6.3. Game Mode

The Miroir M700S supports a dedicated Game Mode with less than 50ms response time, providing a smoother gaming experience.

Connect your gaming console via HDMI.
Navigate to the projector's settings and enable Game Mode for reduced input lag.

Figure 6.2: Image depicting the Miroir M700S being used for gaming, highlighting its low response time.

6.4. Audio Output

The projector has a built-in 3-watt speaker. For a more immersive experience, connect external speakers or a sound system using the 3.5mm audio out jack or via Bluetooth.

6.5. Battery Usage

The built-in rechargeable battery provides up to 2 hours of operation in ECO Mode. The battery indicator on the screen will show the remaining charge.

7. Maintenance

7.1. Cleaning the Projector

Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners or excessive pressure.
Exterior: Wipe the projector's casing with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but ensure no moisture enters the device.
Ventilation: Periodically check the ventilation grilles for dust accumulation. Use a soft brush or compressed air to gently clear any blockages.

7.2. LED Lamp Longevity

The Miroir M700S utilizes a long-lasting LED lamp.

Normal Mode: Up to 20,000 hours of lamp life.
ECO Mode: Up to 30,000 hours of lamp life. Using ECO Mode extends the lamp's lifespan and reduces power consumption.

8. Troubleshooting

If you encounter issues with your Miroir M700S projector, refer to the following common problems and solutions.

Problem	Possible Cause / Solution
No Image / Power On Issue	Ensure the AC adapter is securely connected to the projector and a working power outlet. Check if the power button on the projector or remote is pressed. If using battery, ensure it is charged.
Image is Distorted / Not Rectangular	The automatic keystone correction may not be functioning optimally. Go to Settings > Keystone Correction and try manual adjustment. Ensure the projector is placed on a level surface.
Image is Blurry / Out of Focus	Adjust the focus manually using the focus controls on the projector. Ensure the projection distance is within the recommended range.
Cannot Connect to Wi-Fi / Network	Verify your Wi-Fi password is correct. Ensure the projector is within range of your Wi-Fi router. Try restarting your router and the projector. If using a wired connection, check the Ethernet cable.
Streaming Apps Not Working (e.g., YouTube, Prime Video)	Ensure you have a stable internet connection. Check for available firmware updates for the projector. Go to Settings > About > System Update. Some apps may require specific login procedures or may have regional restrictions. Clear the app's cache or reinstall the app if possible.
No Audio Output	Increase the volume on the projector and any connected external audio devices. Check audio output settings in the projector's menu. If using external speakers, ensure they are properly connected (3.5mm or Bluetooth).
iOS Screen Mirroring Issues	Ensure both the iOS device and the projector are on the same Wi-Fi network. Check for firmware updates on the projector, as compatibility issues can be resolved with updates. Restart both devices.

9. Specifications

The following table lists the technical specifications of the Miroir M700S Portable Projector.

Feature	Detail
Model Number	M700S
Display Resolution	1920 x 1080 (Full HD)
Visible Screen Diagonal	Up to 120 inches / 305 cm
Lamp Type	LED
Lamp Life (Normal Mode)	Up to 20,000 hours
Lamp Life (ECO Mode)	Up to 30,000 hours
Connectivity Technology	HDMI, USB, RJ45 (LAN), 5G WiFi, Bluetooth
Built-in Speaker	3-watt
Battery	Rechargeable Lithium Ion (up to 2 hours in ECO Mode)
Game Mode Response Time	Less than 50ms
Product Dimensions	4.7 x 8.9 x 1.4 inches
Item Weight	1.75 pounds

10. Warranty and Support

10.1. Product Support

For technical assistance, troubleshooting beyond this manual, or general inquiries about your Miroir M700S projector, please visit the official Miroir support website or contact their customer service.

You can find more information and support resources on the Miroir Brand Store on Amazon.

10.2. Protection Plans

Extended protection plans are available for purchase to cover your Miroir M700S projector beyond the standard manufacturer's warranty. These plans offer additional coverage for various incidents.

2-Year Protection Plan: Provides coverage for 24 months.
3-Year Protection Plan: Provides coverage for 36 months.
Complete Protect: A monthly plan covering eligible past and future purchases.

For details on coverage and terms, please refer to the specific protection plan documentation provided at the time of purchase.

	Miroir M700S Projector Quick Start Guide Concise guide to setting up and using the Miroir M700S projector, including port identification, remote control functions, wired and wireless connection methods, image adjustment, and troubleshooting tips.
	Miroir L500S Full HD 1080p Projector User Guide A comprehensive guide to the Miroir L500S Full HD 1080p projector, detailing its features, connections, wireless setup, image adjustments, troubleshooting steps, and FCC compliance information.
	Miroir M190 Mini Pro Projector: Quick Start Guide Get started quickly with the Miroir M190 Mini Pro Projector. This guide provides setup instructions, feature descriptions, and troubleshooting tips for your portable projector.
	Miroir L710S Pro 1080p Smart LCD Projector with SYNQ TV - Quick Start Guide & Specifications Get started with your Miroir L710S Pro 1080p Smart LCD Projector. This guide covers setup, remote control, connections, settings, projection modes, Wi-Fi, screen mirroring, ceiling installation, specifications, troubleshooting, and safety information.
	Miroir M190 Mini Pro Projector: Quick Start Guide and Troubleshooting A concise guide to setting up and troubleshooting the Miroir M190 Mini Pro Projector, covering connections, basic functions, and common issues.
	Miroir M600 Full HD Pro Projector Quick Start Guide A quick start guide for the Miroir M600 Full HD Pro Projector, covering setup, troubleshooting, and device features in multiple languages.

Miroir M700S