1. Introduction
This manual provides essential information for the safe and efficient use of your Cecotec Bolero Flux DT 908002 Glass White 90cm Decorative Extractor Hood. Please read these instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.
Image 1: Front view of the Cecotec Bolero Flux DT 908002 Glass White 90cm Decorative Extractor Hood.
2. Safety Instructions
Always adhere to the following safety guidelines to prevent injury or damage to the appliance:
- Ensure the electrical installation complies with local regulations.
- Do not operate the hood if the power cord is damaged.
- Maintain adequate ventilation in the room when the hood is used simultaneously with gas or other fuel-burning appliances.
- Do not flambé under the range hood.
- Clean filters regularly to prevent grease accumulation, which can be a fire hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
3. Package Contents
Verify that all components are present in the package:
- 1 x Cecotec Bolero Flux DT 908002 Extractor Hood
- 1 x Mounting Kit
- 1 x User Manual
- 2 x Carbon Filters (Ø176)
4. Product Overview and Features
The Cecotec Bolero Flux DT 908002 is a 90cm decorative extractor hood designed for efficient air purification in your kitchen. Key features include:
- High Suction Power: 800 m³/h with a 210W motor.
- Energy Efficiency: Class A++.
- Advanced Controls: Touch control panel with 3 power levels plus a Booster function.
- Hand Movement Control: Operate the hood with simple hand gestures.
- Delay Function: Automatic shut-off after a set period.
- Effective Filtration: Includes a 5-layer aluminum grease filter and two Ø176 carbon filters for odor elimination.
- Illumination: LED and Bluelit lighting for enhanced visibility and ambiance.
Image 2: Angled view of the extractor hood installed in a modern kitchen setting.
Image 3: The extractor hood showcasing its LED and Bluelit illumination in a kitchen.
5. Setup and Installation
Installation should be performed by a qualified technician or in accordance with the provided mounting kit instructions. Ensure the mounting surface is strong enough to support the hood's weight (approximately 19.44 kg).
- Unpacking: Carefully remove all packaging materials and inspect the hood for any damage.
- Mounting: Follow the detailed instructions in the mounting kit to securely attach the hood to the wall. Ensure proper distance from the cooking surface as per local regulations.
- Ducting: Connect the exhaust ducting (150mm diameter recommended) to an external vent. For recirculation mode, ensure carbon filters are installed.
- Electrical Connection: Connect the hood to a grounded 230V power supply.
Image 4: The extractor hood correctly installed above a cooking surface.
6. Operating Instructions
The hood features a touch control panel and Hand Movement Control for ease of use.
6.1 Touch Control Panel
Image 5: Detailed view of the touch control panel.
The touch panel allows you to:
- Power On/Off: Press the power symbol to turn the hood on or off.
- Adjust Power Levels: Cycle through 3 power levels (low, medium, high) using the speed control buttons.
- Booster Function: Activate maximum extraction power for intense cooking fumes.
- Light Control: Turn the LED and Bluelit lights on or off.
6.2 Hand Movement Control
This feature allows you to control the hood with simple hand gestures, reducing the need to touch the panel.
Image 6: Diagram showing how to use hand gestures to control the hood's functions.
- Power On/Off: Wave your hand across the sensor area.
- Increase/Decrease Speed: Move your hand left or right over the designated sensor areas to adjust the extraction speed.
6.3 Delay Function
The Delay Function allows the hood to continue operating for a short period after cooking is finished, then automatically turn off.
Image 7: Visual representation of the Delay Function, indicating automatic shut-off.
Activate this function via the touch control panel. The hood will run for a preset duration (e.g., 5 minutes) before powering down, ensuring complete air purification.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your extractor hood.
7.1 Cleaning the Grease Filters
The 5-layer aluminum grease filters capture cooking fats. They should be cleaned regularly (e.g., monthly) to maintain efficiency.
Image 8: Diagram showing the multi-layer structure of the aluminum grease filter.
- Turn off the hood and disconnect it from the power supply.
- Remove the grease filters by releasing their latches.
- Wash the filters by hand in hot soapy water or in a dishwasher.
- Allow filters to dry completely before re-installing.
7.2 Replacing the Carbon Filters
If your hood is used in recirculation mode, the carbon filters absorb odors. They cannot be washed and must be replaced every 3-6 months, depending on usage.
Image 9: Two carbon filters, essential for odor removal in recirculation mode.
- Turn off the hood and disconnect it from the power supply.
- Remove the grease filters to access the carbon filters.
- Twist or unclip the old carbon filters and remove them.
- Install new carbon filters, ensuring they are securely in place.
- Re-install the grease filters.
7.3 Exterior Cleaning
Clean the exterior surfaces with a soft cloth and a mild, non-abrasive detergent. Avoid harsh chemicals or abrasive materials that could damage the glass or stainless steel finish.
8. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on | No power supply Faulty power cord | Check power connection and circuit breaker Contact service for inspection |
| Low suction power | Clogged grease filters Blocked ducting Incorrect power level | Clean grease filters Check ducting for obstructions Increase power level or activate Booster |
| Excessive noise | Loose components Improper installation Ducting issues | Check for loose parts and tighten Verify installation according to manual Inspect ducting for bends or restrictions |
| Lights not working | Faulty LED module | Contact service for replacement |
If the problem persists after attempting these solutions, please contact Cecotec customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | 02928 |
| Brand | Cecotec |
| Product Dimensions | 42.5 x 90 x 48.5 cm (Depth x Width x Height) |
| Weight | 19.44 kg |
| Color | White |
| Material | Stainless Steel, Glass |
| Voltage | 230 Volts |
| Motor Power | 210W |
| Airflow Capacity | 800 m³/h |
| Noise Level | 64 Decibels |
| Energy Efficiency Class | A++ |
| Lighting Type | LED |
| Filter Type | Carbon, Aluminum Mesh |
| Control Type | Touch |
| Special Features | Hand Movement Control |
| Ventilation Type | Ducted/Vented |
10. Warranty and Support
Your Cecotec Bolero Flux DT 908002 Extractor Hood comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact Cecotec customer support through their official website or the contact information provided in your warranty documentation.
Availability of spare parts in the EU is guaranteed for 10 years from the product's first availability date.
