Introduction
The PopBloom T30 LED Aquarium Light is a high-performance, smart-controlled lighting unit designed for marine aquariums, supporting SPS (Small Polyp Stony), LPS (Large Polyp Stony), and mixed reef tanks. This system provides a full spectrum output optimized for coral growth and includes advanced programming capabilities to simulate natural day/night cycles and lunar phases. This manual provides detailed instructions for the proper installation, operation, and maintenance of your T30 LED Aquarium Light system.
Safety Information
- Always disconnect power before performing any maintenance or installation.
- Do not operate the light if any part is damaged.
- Ensure the power supply and controller are kept dry and away from water splashes.
- This product is designed for indoor use only, specifically for aquarium lighting.
- Keep out of reach of children.
- Do not look directly into the LED lights when they are on, as this may cause eye strain.
Package Contents
Verify that all items listed below are included in your package:
- 3x T30 LED Light Panels (29cm fan light)
- 1x Smart Controller
- 3x Power Supplies & Plugs (compatible with local standards)
- 3x Arm Mount Kits
- 1x User Manual
- 2x Rail Kits (for connecting multiple panels)
Image: Contents of the PopBloom T30 LED Aquarium Light package, showing three light panels, a smart controller, three power supplies, three arm mount kits, and the user manual.
Product Overview
The PopBloom T30 system is designed for optimal reef tank illumination, featuring a modular design and intelligent control.
Smart Controller
The Turing Controller features a large LCD screen for easy monitoring of mode, time, and channel settings. It allows for simple setup and advanced programming to create a 24-hour cycle that mimics natural light conditions.
Image: Detailed view of the PopBloom Smart Controller, highlighting the LCD screen displaying channel percentages, current time, and mode, along with five operational buttons (Esc, -, +, Shift, Set).
LED Panel Specifications
Each T30 panel measures 29x12x5.5cm (11.4"L x 4.7"W x 2.2"H) and consumes a maximum of 100 Watts. The system is powered by an AC Adaptor (100-265V worldwide suitable). The LED array is divided into 4 programmable channels:
- Channel 1: 10x 20000K Cool White, 1x 14000K White
- Channel 2: 2x 470nm Blue, 1x 520nm Green
- Channel 3: 10x 470nm Blue, 1x 450nm Royal Blue
- Channel 4: 4x 450nm Royal Blue, 2x 395nm UV, 2x 410nm Purple, 4x 14000K White, 2x 520nm Green, 1x 660nm Red
Image: Diagram illustrating the T30 LED panel dimensions, power consumption, and the spectral distribution of its four channels, including CIE 1931 Color Graph, Photometric Spectrum, and PAR spectrums.
Setup
Mounting the Light
The T30 light comes with arm mount kits designed to attach the light panels to the sides of your aquarium. These kits fit rimless or rimmed tanks with a maximum glass thickness of 4cm. Securely attach the arm mounts to your tank, then slide the light panels onto the mounts. Ensure the lights are positioned to provide even coverage over your tank.
Connecting the System
The T30 system supports real daisy chain connectivity. Connect the light panels to each other using the provided daisy chain cables. Then, connect the smart controller to the first light panel. Finally, connect the power supplies to each light panel and plug them into a suitable power outlet. All connected lights will be controlled by the single smart controller.
Initial Controller Setup
Follow these steps to set up the date, time, and initial operating mode:
- Step 1: Set Date & Time
Navigate to the 'Date & Time' setting on the controller. Adjust the current date and time. You can also sync with phone time or set a time offset. - Step 2: Select Preset Mode
After setting the time, choose a preset operating mode. Options include '4 Season & Lunar', 'Slow Acclimate', 'Vivid Color', and 'Coral Cut & Frag'. Select the mode that best suits your aquarium's needs.
Image: Flowchart illustrating the easy setup process for the Smart Controller, showing steps for setting date and time, and then selecting a preset mode such as 'Slow Acclimate' or 'Vivid Color'.
Operating Instructions
The Smart Controller allows you to manage the light's operation through various modes and settings.
Preset Modes
The controller offers several pre-programmed modes to suit different aquarium environments:
- Slow Acclimation Mode: Recommended for the first month to help your tank adapt to the new lighting environment.
- Vivid Color Mode: Enhances the coloration of corals and fish.
- 4 Season Mode: Simulates seasonal light changes.
- Moonlight Mode: Provides gentle illumination during nighttime hours.
24-Hour Cycle Running
The system can mimic natural day/night cycles and lunar phases with smooth dimming down to 0.1%. This includes a gentle sunrise, full daylight, sunset, and faint moonlight, providing a natural environment for your aquatic life.
Advanced Programming
For users who require more precise control, the advanced programming feature allows customization of time and brightness values for each of the 4 channels. This enables the creation of limitless spectral combinations to meet your tank's specific needs.
- Access the 'Program SunCycle' option in the controller menu.
- Select 'Set Channel' for each of the four channels (1-4).
- For each channel, set specific time points and corresponding brightness percentages. For example, you can set Channel 1 to 0% at 05:00, 30% at 07:00, and 55% at 09:30.
- Repeat for all desired channels and time points to create your custom light cycle.
Image: Screenshot of the Smart Controller's 'Advanced Program Mode' interface, showing options to set individual channels. Below, a graph illustrates a customized 24-hour light cycle with varying intensity for each of the four channels, alongside images of an aquarium at different times of the day.
Maintenance
Cleaning
Regularly clean the light panels and controller to ensure optimal performance. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or immerse any part of the unit in water. Ensure the unit is unplugged before cleaning.
Smart Cooling System
The T30 features smart fans for LED temperature control. These fans automatically activate when the LED temperature reaches 104 degrees Fahrenheit (40 degrees Celsius) to maintain optimal operating conditions. At very low-intensity levels, fan operation may not be required. Ensure the fan vents are not obstructed to allow for proper airflow.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; loose connection; controller issue | Check power plug and outlet. Ensure all cables are securely connected. Verify controller is powered on. |
| Lights are dim or flickering | Incorrect brightness setting; power supply issue | Check brightness settings on the controller. Ensure power supplies are functioning correctly. |
| Controller screen is blank | No power to controller; controller malfunction | Ensure the controller is properly connected to the light system and receiving power. If problem persists, contact support. |
| Fans are not running | LED temperature is low; fan malfunction | Fans only activate above 104°F (40°C). If lights are hot and fans are off, ensure vents are clear. If still not working, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model | T30 LED Aquarium Light |
| Panel Dimensions (each) | 29cm L x 12cm W x 5.5cm H (11.4"L x 4.7"W x 2.2"H) |
| Power Consumption (Max) | 100 Watts per panel (0.8 KWH/day) |
| Input Voltage | AC 100-265V |
| Light Source Type | LED |
| Number of Channels | 4 Programmable Channels |
| Material | Aluminum (body), Glass (shade) |
| Mounting | Arm Mount Kit (fits up to 4cm glass thickness) |
| Special Features | Dimmable, Full Spectrum, Smart Controller, Daisy Chain Function |
Image: Chart displaying PAR (Photosynthetically Active Radiation) values at various depths (0" to 36") for the T30 LED light, indicating high penetration suitable for reef coral growth.
Warranty and Support
PopBloom products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official PopBloom website. Please retain your proof of purchase for warranty claims.
