Transformers Legacy Evolution Leader Transmetal II Megatron Toy Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the Transformers Legacy Evolution Leader Transmetal II Megatron action figure. This figure celebrates 40 years of Transformers history, featuring a detailed design inspired by Beast Wars: Transformers. It converts between robot and dragon modes and includes Evo-Fusion technology for dynamic play.

Figure in robot mode with fire blast accessory.

2. Safety Information

WARNING: Small parts may be generated. Not for children under 3 years. Adult supervision is recommended for younger users.

3. What's in the Box

• Transmetal II Megatron Figure
• Blast Effect Accessory
• Instruction Manual (this document)

Figure and packaging contents.

4. Setup

Carefully remove the figure and accessories from the packaging. Ensure all components listed in Section 3 are present. No assembly is required before transformation.

5. Operating: Transformation Instructions

The Transmetal II Megatron figure converts between robot mode and dragon mode in 33 steps. Follow the steps below for a smooth transformation.

5.1. Robot Mode to Dragon Mode

1. Begin with the figure in robot mode.
2. Fold the robot's hands into the forearms.
3. Rotate the waist 180 degrees.
4. Collapse the robot's legs and feet to form the dragon's rear legs.
5. Extend the dragon's neck and head from the robot's back.
6. Position the wings, which are attached to the robot's back, to extend outwards.
7. Adjust the dragon's tail, which forms from the robot's arm, into position.
8. Ensure all panels and joints are securely tabbed or clicked into place.

5.2. Dragon Mode to Robot Mode

1. Begin with the figure in dragon mode.
2. Collapse the dragon's neck and head back into the robot's torso.
3. Fold the dragon's rear legs to form the robot's legs and feet.
4. Retract the wings against the robot's back.
5. Transform the dragon's tail into the robot's arm and extend the hand.
6. Rotate the waist 180 degrees to face forward.
7. Ensure all panels and joints are securely tabbed or clicked into place.

Refer to the packaging for visual transformation steps.

5.3. Product Overview Video

Watch this official product overview video for a visual guide to the figure's features and transformation.

6. Features

• Evo-Fusion Technology: Experience the evolution and attach the blast effect to the figure’s dragon mode mouth to simulate fire breathing.
• Articulated Dragon Features: The dragon mode features an articulating neck, tail, and wings for dynamic posing.
• Size: The figure stands approximately 8.5 inches tall in robot mode and over a foot tall in dragon mode. The wingspan is approximately 1 foot.

Figure in dragon mode with fire blast accessory.

7. Specifications

8. Maintenance

To maintain the quality and longevity of your figure:

• Clean with a soft, dry cloth. Avoid harsh chemicals or abrasive materials.
• Store in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
• Handle joints and moving parts gently during transformation to prevent breakage.

9. Troubleshooting

If you encounter any issues with your figure, consider the following:

• Stiff Joints: Gently move the joint back and forth to loosen it. Do not force.
• Parts Not Aligning: Review the transformation steps carefully. Ensure all previous steps are completed correctly and parts are fully extended or retracted before attempting to align new sections.
• Missing or Damaged Parts: Refer to the Warranty & Support section for assistance.

10. Warranty & Support

For warranty information, product support, or to inquire about replacement parts, please contact Hasbro customer service. Contact details can typically be found on the product packaging or the official Hasbro website.