Introduction
Welcome to the user manual for your Campfire Audio Orbit True Wireless Earbuds. This guide provides detailed instructions on setting up, operating, maintaining, and troubleshooting your new earbuds to ensure optimal performance and longevity.
The Campfire Audio Orbit earbuds are designed to deliver high-quality audio with the convenience of true wireless technology, featuring Bluetooth 5.2, long battery life, and a durable, water-resistant design.
What's in the Box
Your Campfire Audio Orbit package includes the following components:
- Campfire Audio Orbit True Wireless Earbuds
- Wireless Charging Case
- USB-C to USB-C Charging Cable
- 3x Pairs of Foam Ear Tips (Small, Medium, Large)
- 3x Pairs of Silicone Ear Tips (Small, Medium, Large)
- Campfire Audio Pin (promotional item, not functional)
Image: All components included in the Campfire Audio Orbit package, neatly laid out.
Setup
Initial Charging
Before first use, ensure your Orbit earbuds and charging case are fully charged. The charging case supports both USB-C wired charging and Qi-compatible wireless charging.
- Wired Charging: Connect the provided USB-C to USB-C cable to the charging port on the case and a compatible power source. A full wired charge takes approximately 1 hour.
- Wireless Charging: Place the charging case on a Qi-compatible wireless charging pad. A full wireless charge takes approximately 2.5 hours.
Image: The Orbit charging case being recharged wirelessly, highlighting the charging indicator.
Pairing Your Earbuds
Follow these steps to pair your Campfire Audio Orbit earbuds with your device:
- Open the charging case. The earbuds should be inside.
- On your device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
- Locate the small pairing button inside the charging case, between the earbuds.
- Press and hold this pairing button for 5 seconds until the LED lights on the case flash three times. This indicates the earbuds are in pairing mode.
- On your device's Bluetooth settings, select "Orbit" from the list of available devices.
- Once connected, the device will show "Orbit" as connected, and the earbuds are ready for use.
Video: An official Campfire Audio video demonstrating the pairing process for the Orbit earbuds with a smartphone.
Image: Visual representation of Bluetooth 5.2 connection and supported audio codecs (SBC, AAC, AptX).
Image: The Orbit earbuds in their charging case, illustrating the location of the pairing button and battery level indicators.
Operating Your Earbuds
Touch Controls
The Campfire Audio Orbit earbuds feature intuitive touch controls on the outer surface of each earbud. The control area allows for various functions:
| Action | Left Earbud | Right Earbud |
|---|---|---|
| 1 Tap | Play/Pause, Answer Call | Play/Pause, Answer Call |
| 2 Taps | Previous Track | Next Track |
| 3 Taps | Voice Assistant | Voice Assistant |
| Hold | Volume Down | Volume Up |
Image: A visual guide to the touch controls on the Orbit earbuds, showing single tap, double tap, triple tap, and hold functions.
Using the Companion App
For advanced customization and control, download the official Campfire Audio companion app. The app allows you to:
- Adjust equalizer settings (EQ) to personalize your sound profile.
- Select from preset EQ modes.
- Update earbud firmware.
- Monitor battery levels.
Battery and Playtime
The Campfire Audio Orbit earbuds offer extended listening times:
- Earbud Playtime: Up to 8.5 hours of playback on a single charge (at 80% volume).
- Total Playtime with Case: An additional 30 hours of reserve power is available from the charging case, providing a total of approximately 38.5 hours of listening time.
Image: Illustration detailing the battery storage capacity of both the Orbit earbuds and their charging case.
Maintenance and Care
To ensure the longevity and optimal performance of your Campfire Audio Orbit earbuds, follow these care guidelines:
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. For ear tips, remove them and clean with mild soap and water, then dry completely before reattaching. Avoid using harsh chemicals or abrasive materials.
- Water Resistance: The Orbit earbuds have an IPX5 water resistance rating, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for workouts and light rain. Do not submerge the earbuds in water. The charging case is not water-resistant.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.
- Ear Tip Selection: Experiment with the included foam and silicone ear tips to find the best fit for your ears. A proper seal is crucial for sound quality and comfort.
Image: Visual representation of the IPX5 water resistance rating, highlighting protection against splashes and sweat.
Troubleshooting
If you encounter issues with your Campfire Audio Orbit earbuds, try the following solutions:
Connectivity Issues (Earbuds not pairing or disconnecting)
- Re-pair Earbuds: Place both earbuds back into the charging case. Close the lid, wait a few seconds, then open it. Follow the pairing steps outlined in the "Setup" section.
- Forget Device: On your device's Bluetooth settings, "forget" or "unpair" the "Orbit" device, then attempt to re-pair.
- Reset Earbuds: If issues persist, perform a hard reset. Consult the Campfire Audio support website or the companion app for specific reset instructions, as this may vary.
- Interference: Ensure there are no strong Wi-Fi signals, other Bluetooth devices, or physical obstructions between your device and the earbuds that could cause interference.
Sound Issues (No sound, low volume, unbalanced sound)
- Check Volume: Ensure the volume on both your device and the earbuds is turned up.
- Clean Earbuds: Earwax or debris can block the sound output. Gently clean the earbud nozzles and grilles using a dry cotton swab or a small, soft brush.
- Proper Fit: Ensure the ear tips are correctly seated on the earbuds and that you have a good seal in your ear. Try different sized ear tips.
- Battery Level: Low battery can affect sound quality. Ensure both earbuds and the charging case are sufficiently charged.
Charging Issues
- Check Cable/Charger: Ensure the USB-C cable and power adapter are working correctly. Try a different cable or power source.
- Clean Charging Ports: Ensure the USB-C port on the case and the charging contacts on the earbuds and inside the case are free of dust or debris.
- Wireless Charging Pad: If using wireless charging, ensure the case is properly aligned on the charging pad and the pad is powered on.
Specifications
Key technical specifications for the Campfire Audio Orbit True Wireless Earbuds:
| Feature | Detail |
|---|---|
| Model Name | Orbit |
| Connectivity Technology | Wireless (Bluetooth 5.2) |
| Supported Codecs | SBC, AAC, AptX |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 10 Millimeters |
| Frequency Range | 5Hz–20 kHz |
| Earbud Battery Life | 8.5 Hours |
| Case Battery Life | 30 Hours (additional) |
| Charging Time (Wired) | Approx. 1 Hour |
| Charging Time (Wireless) | Approx. 2.5 Hours |
| Charging Interface | USB-C, Qi Wireless |
| Water Resistance Rating | IPX5 (Earbuds only) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Item Weight | 3.17 ounces |
| UPC | 729440685652 |
Image: A detailed view of the Orbit earbud's design, showcasing its form factor.
Warranty and Support
Campfire Audio provides a limited warranty for the Orbit True Wireless Earbuds. Please refer to the official Campfire Audio website or the warranty card included with your product for specific terms and conditions.
For technical support, warranty claims, or further assistance, please visit the Campfire Audio Store on Amazon or their official website.
