PERFASCIN RG57A7-BGEF

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

PERFASCIN RG57A7/BGEF Replacement Remote Control User Manual

For Midea Air Conditioners

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your PERFASCIN RG57A7/BGEF replacement remote control. This remote is designed to be compatible with various Midea Air Conditioner models, including RG57A6/BGEFU1, CR166-RG57A6EU-6, RG57D/BGE, RG57B/BGE, RG57B2/BGE, RG57/BGE, and RG57A/BGE. Please read this manual thoroughly before using the remote control.

Front view of the PERFASCIN RG57A7/BGEF replacement remote control

Figure 1: Front view of the PERFASCIN RG57A7/BGEF replacement remote control, showing the display screen and various function buttons.

Setup

1. Battery Installation

The remote control requires two (2) AAA batteries (not included). Follow these steps to install the batteries:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards to open the compartment.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Back view of the remote control with battery compartment open

Figure 2: Back view of the remote control with the battery compartment open, showing where to insert two AAA batteries.

2. Initial Use

No programming or setup is required for this replacement remote control. Once batteries are correctly installed, the remote is ready for immediate use with compatible Midea Air Conditioners.

Important Note: This remote control displays temperature readings in Celsius only. It does not support Fahrenheit display.

Operating Instructions

Familiarize yourself with the buttons and their functions:

Angled view of the remote control showing all buttons clearly

Figure 3: Angled view of the remote control, highlighting the layout of the buttons.

  • ON/OFF: Powers the air conditioner on or off.
  • MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • FAN: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
  • TEMP ▲ / ▼: Increases or decreases the set temperature.
  • SLEEP: Activates or deactivates the sleep mode for quiet operation and energy saving.
  • TURBO: Engages maximum fan speed for rapid cooling or heating.
  • SELF CLEAN: Initiates the self-cleaning function of the air conditioner (if supported by the unit).
  • SWING: Controls the horizontal louver movement.
  • DIRECT: Adjusts the vertical louver position.
  • LED: Turns the display light on or off on the air conditioner unit.
  • MY TEMP: Recalls a preferred temperature setting.
  • ECO: Activates energy-saving mode.
  • TIMER ON: Sets a timer for the air conditioner to turn on.
  • TIMER OFF: Sets a timer for the air conditioner to turn off.
  • SHORT CUT: Recalls a frequently used setting.

Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.

Maintenance

1. Battery Replacement

Replace batteries when the remote control's response becomes sluggish or the display dims. Always replace both batteries simultaneously with new AAA batteries. Do not mix old and new batteries, or different types of batteries.

2. Storage

If the remote control will not be used for an extended period, remove the batteries to prevent potential leakage and damage to the device. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

3. Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the surface or internal components.

Troubleshooting

ProblemPossible CauseSolution
Remote control not responding.
  • Batteries are depleted or incorrectly installed.
  • Obstruction between remote and AC unit.
  • Remote control is too far from the AC unit.
  • Replace batteries with new AAA batteries, ensuring correct polarity.
  • Remove any objects blocking the signal path.
  • Move closer to the air conditioner unit.
Display on remote is dim or blank.Batteries are low.Replace batteries with new AAA batteries.
Air conditioner does not respond to specific commands.
  • AC unit may not support the specific function (e.g., SELF CLEAN).
  • Remote signal not reaching the AC unit.
  • Refer to your air conditioner's manual for supported features.
  • Ensure direct line of sight and proper distance.

If you continue to experience issues after attempting these solutions, please contact customer support.

Specifications

  • Model Number: RG57A7-BGEF
  • Brand: PERFASCIN
  • Compatible Devices: Midea Air Conditioners (models RG57A6/BGEFU1, CR166-RG57A6EU-6, RG57D/BGE, RG57B/BGE, RG57B2/BGE, RG57/BGE, RG57A/BGE)
  • Connectivity Technology: Infrared (IR)
  • Power Source: 2 x AAA Batteries (not included)
  • Product Dimensions: 6 x 3 x 0.5 inches (approximately)
  • Item Weight: 2 ounces (approximately, without batteries)
  • Special Feature: Ergonomic design
  • Temperature Display: Celsius only

Customer Support

For any questions, concerns, or assistance with your PERFASCIN RG57A7/BGEF replacement remote control, please contact our customer support team. We are committed to resolving any issues promptly and providing the best possible service.

Please refer to your purchase documentation or the seller's contact information for specific support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.