Introduction
This instruction manual provides essential information for the safe and effective use of your LIGE Smartwatch Charger. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage to the charger or your smartwatch.
The LIGE Smartwatch Charger is designed to provide a reliable and convenient charging solution for compatible LIGE smartwatch models. Its magnetic design ensures a secure connection for efficient power transfer.
Product Overview
The LIGE Smartwatch Charger features a USB-A connector on one end and a magnetic charging puck with two contact pins on the other. The cable is designed for durability and flexibility.
Image: The LIGE Smartwatch Charger showing the USB-A plug and the magnetic 2-pin charging connector.
Key Features:
- Magnetic Connection: Ensures a secure and stable connection to your smartwatch, preventing accidental disconnections during charging.
- 2-Pin Design: Compatible with LIGE smartwatches requiring a 2-pin magnetic charging interface.
- Durable Cable: Constructed to withstand repeated bending, enhancing the product's lifespan.
- Compact and Portable: Lightweight design makes it easy to carry for use at home, office, in the car, or while traveling.
Image: Diagram illustrating the charger's dimensions, including a 60cm cable length and 4.0mm pin spacing on the magnetic connector.
Image: Illustration demonstrating the charger cable's ability to withstand repeated bending up to 180 degrees without damage.
Image: The LIGE Smartwatch Charger cable shown coiled, indicating its compact nature for storage and portability.
Setup
Before charging, ensure your LIGE smartwatch is compatible with a 2-pin magnetic charger.
- Prepare Power Source: Connect the USB-A end of the charger cable to a compatible USB power source, such as a computer's USB port, a USB wall adapter (5V/1A recommended), or a power bank.
- Position Smartwatch: Place your LIGE smartwatch on a flat, stable surface.
- Connect Charger: Bring the magnetic charging puck close to the charging contacts on the back of your smartwatch. The magnets will automatically align the charger with the smartwatch's charging pins. Ensure the pins on the charger align correctly with the contacts on the smartwatch.
Image: A close-up view of the magnetic charging connector, highlighting the two contact pins.
Operating Instructions
Once the charger is securely connected to both the power source and your smartwatch, the charging process will begin automatically. The smartwatch display should indicate that it is charging.
- Charging Indicator: Refer to your smartwatch's user manual for specific charging indicators (e.g., battery icon, LED light).
- Charging Time: Charging time may vary depending on the smartwatch model, battery level, and power source.
- Disconnection: To disconnect, gently pull the magnetic charging puck away from the smartwatch. Then, unplug the USB-A connector from the power source.
Image: The charger depicted in different usage scenarios, emphasizing its portability for office, home, car, and travel.
Maintenance
Proper maintenance will extend the life of your LIGE Smartwatch Charger.
- Cleaning: Use a soft, dry cloth to wipe the charging contacts on both the charger and your smartwatch. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tangling the cable.
- Handling: Do not pull the cable forcefully to disconnect the charger. Always grasp the USB plug or the magnetic puck.
Troubleshooting
If you encounter issues with your LIGE Smartwatch Charger, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Smartwatch not charging. |
|
|
| Slow charging. |
|
|
| Charger feels warm. | Normal during operation. | A slight warmth is normal. If it becomes excessively hot, disconnect immediately and contact support. |
Specifications
- Brand: LIGE
- Product Dimensions (L x W x H): 5 x 3 x 1 cm (1.97 x 1.18 x 0.39 inches)
- Weight: 10 grams (0.35 ounces)
- Cable Length: Approximately 60 cm (23.6 inches)
- Connector Type: USB-A to 2-pin Magnetic
- Number of Pins: 2
- Connector Gender: Male to Female
- Cable Type: Smartwatch Charging Cable
- Compatible Devices: LIGE Smartwatches (Models: 290, 1290, 327, 328, 329, ST1, ST2, ST3)
- Special Feature: Magnetic Connection
- Recommended Use: Charging
- Standards Complied: Qi (Note: This is a wired charger; the Qi standard may refer to internal component compatibility.)
- Usage Environment: Indoor
- Manufacturer: LIGE
- ASIN: B0BN8CBWW6
Warranty and Support
For any questions, concerns, or technical support regarding your LIGE Smartwatch Charger, please contact the seller or refer to the official LIGE support channels. Keep your purchase receipt for warranty claims, if applicable.
Please note that specific warranty terms and conditions may vary by region and retailer. It is recommended to consult the seller's return and warranty policy at the time of purchase.
