1. Introduction
Thank you for choosing the CJOY 107cm White Ceiling Fan with Light. This product combines the functionality of a ceiling fan and an LED light, designed for comfort and energy efficiency. It features a DC reversible motor, 6 speed settings, 3 color temperature memory, dimmable light, and a sleep mode, all controllable via a multi-function remote. Please read this manual thoroughly before installation and use to ensure proper operation and safety.
2. Safety Information
- Always turn off the power at the main circuit breaker before installation, cleaning, or maintenance.
- Ensure all electrical connections comply with local codes and ordinances, as well as national electrical codes. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- The fan must be mounted with a minimum of 2.3 meters (7.5 feet) clearance from the floor to the fan blades.
- Ensure the mounting structure can support the weight of the fan (approximately 4.9 kg).
- Do not bend the blade holders during installation or cleaning.
- Do not insert objects into the path of the fan blades while the fan is operating.
- This product is designed for indoor use. While it is rated for humid environments, avoid direct exposure to rain.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- LED Light Module
- Fan Blades (3 pieces)
- Remote Control
- Receiver
- Lampshade
- Mounting Screws and Hardware
- Downrod
- Instruction Manual
Figure 3.1: Included Components
4. Setup (Installation)
Most of the ceiling fan's assembly is pre-done, making the remaining installation steps straightforward. For optimal performance and safety, follow these guidelines:
- Power Disconnection: Before starting, ensure the power supply to the installation area is completely turned off at the circuit breaker.
- Mounting Bracket: Securely attach the mounting bracket to the ceiling joist or a suitable electrical junction box capable of supporting the fan's weight.
- Wiring: Connect the electrical wires according to the provided wiring diagram. Ensure all connections are tight and properly insulated.
- Fan Assembly: Attach the fan motor assembly to the mounting bracket.
- Blade Installation: When installing the fan blades, it is recommended to loosely attach all three blades first. Once all blades are in position, tighten all screws evenly to ensure proper balance and prevent vibrations.
- Lampshade and LED: Install the LED light module and then secure the lampshade.
- Remote Receiver: Ensure the remote control receiver is correctly wired and placed within the canopy.
While installation is generally designed to be completed within 30 minutes, some users may find certain steps challenging. If you encounter difficulties, consider consulting a professional electrician or referring to online video tutorials for similar ceiling fan installations.
Figure 4.1: Easy Installation Overview
5. Operating Instructions
The CJOY ceiling fan is operated using the included multi-function remote control. Ensure batteries are installed correctly in the remote.
5.1 Fan Operation
- Power On/Off: Press the central button (often depicted as a fan icon) to turn the fan on or off.
- Speed Control: Use buttons labeled "1" through "6" to select one of the six available fan speeds. Speed 1 is the lowest, and Speed 6 is the highest.
- Sleep Mode: Press the moon icon button to activate Sleep Mode. In this mode, the fan cycles automatically through speeds 1, 2, and 3 every 20 seconds, simulating a natural breeze for comfortable sleep.
Figure 5.1: CJOY Ceiling Fan with Remote Control
Figure 5.2: Fan Speed and Timer Functions
5.2 Light Operation
- Light On/Off: Use the "LIGHT ON" and "LIGHT OFF" buttons to control the light.
- Color Temperature Adjustment: Press "WW" for Warm White (3000K), "NW" for Natural White (4200K), and "DW" for Cool White (6500K).
- Continuous Color Adjustment: Long-press "WW" to continuously adjust the color temperature from Cool White (6500K) to Warm White (3000K). Long-press "DW" to adjust from Warm White (3000K) to Cool White (6500K).
- Brightness Adjustment (Dimmable): Use the "+" and "-" buttons to adjust the light brightness from 10% to 100%. The light output is a minimum of 200lm and a maximum of 2900lm.
Figure 5.3: Customizable Light Effects
5.3 Timer Function
The fan includes a timer function to automatically turn off after a set period:
- Press "1H" for 1 hour, "3H" for 3 hours, or "6H" for 6 hours.
- Once the timer is set, the fan will automatically turn off at the end of the selected duration.
- Important Note: After setting the timer, avoid pressing any other buttons on the remote, as this may invalidate the timer setting.
Figure 5.4: Timer Function for Night Use
5.4 Reversible DC Motor (Seasonal Use)
The fan features a reversible DC motor, allowing for year-round use:
- Summer Mode (Counter-clockwise rotation): The fan blades push air downwards, creating a cooling effect and accelerating indoor airflow.
- Winter Mode (Clockwise rotation): The fan blades draw warm air upwards from the ceiling, distributing it evenly throughout the room to help circulate heat.
- To switch modes, press the reverse arrow button on the remote control.
Figure 5.5: Reversible Motor for Seasonal Comfort
5.5 Memory Function
The fan's light settings include a memory function:
- To save a light setting (color temperature and brightness), select your desired setting and keep the light on for more than 3 seconds.
- Then, turn off the light and ensure it remains off for at least 10 seconds.
- The next time you turn on the light, it will recall your last saved setting.
- Note: If the light is turned back on less than 10 seconds after being turned off, the color temperature may change.
Figure 5.6: Automatic Memory Function
5.6 Remote Control and Wall Switch
The fan is primarily controlled by the multi-function remote. A wall switch (not included) can be used to turn the light and fan on/off, but it will not allow for intensity or speed adjustments. The remote control comes with a wall-mountable holder for convenient storage.
Figure 5.7: Control Modes (Remote vs. Wall Switch)
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: To clean the fan, wipe the blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure the power is off before cleaning.
- Blade Balance: If the fan wobbles, check that all blade screws are securely tightened. An unbalanced fan can cause noise and reduce efficiency.
- LED Light Module: The LED light module is replaceable. If the light stops working, consult the warranty information or contact customer support for a replacement module.
Figure 6.1: Replaceable LED Light Kit
7. Troubleshooting
If you experience issues with your CJOY ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Loose wiring; Remote control battery dead. | Check circuit breaker; Verify all wire connections; Replace remote control batteries. |
| Light does not work | Loose wiring; LED module failure; Remote control battery dead. | Check wiring connections; Contact support for LED module replacement; Replace remote control batteries. |
| Fan wobbles or makes excessive noise | Loose blade screws; Unbalanced blades; Improper mounting. | Ensure all blade screws are tightened evenly; Check mounting bracket for secure installation; Re-balance blades if necessary. |
| Remote control not responding | Dead batteries; Receiver issue; Obstruction. | Replace remote batteries; Ensure no obstructions between remote and fan; Contact support if issue persists. |
| Timer function not working | Other buttons pressed after setting timer. | Ensure no other buttons are pressed on the remote after activating the timer. Reset the timer if needed. |
If the problem persists after attempting these solutions, please contact CJOY customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | CJOY |
| Model Number | 42-1113 |
| Color | White |
| Dimensions (L x W x H) | 107 x 107 x 32 cm (42 x 42 x 12.6 inches) |
| Weight | 4.9 Kilograms |
| Motor Type | Brushless DC Motor (Energy-saving) |
| Number of Speeds | 6 |
| Noise Level | Below 35 dB (Ultra-silent) |
| Airflow | Up to 4500 CFM |
| Power Consumption | 28 Watts (Max) |
| Voltage | 220 Volts (50Hz) |
| Light Type | Integrated LED (Dimmable) |
| Color Temperature | 3000K (Warm White), 4200K (Natural White), 6500K (Cool White) |
| Lumen Output | 180-2900 LM |
| Control Method | Remote Control |
| Material | Acrylonitrile Butadiene Styrene (ABS), Metal Blades |
| Certifications | CE Compliant |
Figure 8.1: Product Dimensions and Key Specifications
Figure 8.2: Energy Label
Figure 8.3: Product Information Sheet. For more details, visit the EPREL database.
9. Warranty & Support
CJOY is committed to customer satisfaction and provides comprehensive support for its products.
- Warranty: This product comes with a 24-month (2-year) worry-free warranty from the date of purchase.
- Technical Support: We offer 24-hour technical assistance. Should you encounter any issues during use or installation, please do not hesitate to contact us.
Figure 9.1: Warranty and Support Information
