Bellemave Full Size House Bed for Kids Instruction Manual

1. Safety Information

Please read and understand all instructions before assembling and using this product. Retain this manual for future reference.

• Maximum Weight Capacity: The bed is designed to support a maximum weight of 400 pounds. Do not exceed this limit.
• Assembly: Adult assembly is required. Ensure all parts are securely fastened before use.
• Regular Checks: Periodically check all bolts, screws, and fasteners to ensure they are tight and secure. Tighten if necessary.
• Placement: Place the bed on a flat, level surface. Avoid placing near windows where cords or blinds could pose a strangulation hazard.
• Mattress: Use a full-size mattress with appropriate thickness (recommended 8-10 inches) to ensure proper fit and safety.
• Supervision: Always supervise children, especially younger ones, when they are using the bed.
• No Jumping: Do not allow jumping on the bed, as this can cause damage to the frame and potential injury.

2. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Image: Exploded view of the Bellemave Full Size House Bed, showing all individual components including the house frame, bed frame, slats, and two storage drawers.

Components List:

• Headboard and Footboard panels
• Side Rails (Longitudinal supports)
• House Frame components (Roof and vertical supports)
• Bed Slats (8 pieces)
• 2 Storage Drawers (including drawer panels, wheels, and hardware)
• Support Legs
• Hardware Pack (screws, bolts, nuts, Allen wrench, etc.)

3. Setup & Assembly

Assembly requires two adults and approximately 1-2 hours. Ensure you have adequate space and all tools (usually an Allen wrench is provided, a screwdriver may be needed) before starting.

3.1. Assemble the Main Bed Frame

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Attach the side rails to the headboard and footboard using the provided bolts and nuts. Do not fully tighten all fasteners until the frame is complete.
3. Insert the central support beam (if applicable) and attach any additional support legs to the underside of the frame.
4. Once the main rectangular frame is formed, fully tighten all bolts and screws.

Image: The main bed frame assembled, showing the headboard, footboard, side rails, and slat supports.

3.2. Install Bed Slats

5. Place the wooden slats evenly across the bed frame's support ledges.
6. Secure each slat to the side rails using the provided screws. Ensure slats are spaced correctly for mattress support.

Image: A view of the bed frame with all wooden slats properly installed, ready for a mattress.

3.3. Assemble the House Frame

7. Attach the vertical house frame supports to the corners of the main bed frame using the designated hardware.
8. Connect the roof beams to the top of the vertical supports, forming the house shape. Ensure all connections are secure.

Image: The Bellemave Full Size House Bed fully assembled, showcasing the distinctive house-shaped frame.

3.4. Assemble and Install Storage Drawers

9. Assemble each drawer by connecting the side panels, front, and back panels, and then securing the bottom panel.
10. Attach the wheels to the bottom of each drawer.
11. Slide the assembled drawers under the bed frame.

Image: The Bellemave Full Size House Bed with one of its two storage drawers partially extended, demonstrating its functionality.

After completing all steps, ensure all connections are tight and the bed is stable before placing a mattress on it.

4. Usage Guidelines

• Mattress Placement: Place a full-size mattress directly onto the bed slats. No box spring is required.
• Storage Drawers: The two integrated drawers provide convenient storage for toys, bedding, or other items. Ensure items are evenly distributed and do not overload the drawers.
• Low Height Design: The bed's low height is designed for easy access for children, promoting independence.
• Decorative Potential: The house-shaped frame can be decorated with lights, fabrics, or other child-safe embellishments to personalize the space.

Image: The Bellemave Full Size House Bed fully assembled and decorated, showing its intended use in a child's room.

5. Maintenance

• Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish.
• Dusting: Regularly dust the frame to prevent buildup.
• Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any that have become loose to maintain structural integrity.
• Drawer Care: Keep drawer tracks clean and free of debris to ensure smooth operation.

6. Troubleshooting

7. Specifications

Image: A technical diagram illustrating the precise dimensions of the Bellemave Full Size House Bed, including length, width, height, and drawer measurements.

8. Warranty and Support

For any questions regarding assembly, missing parts, or product defects, please contact Bellemave customer support. Refer to your purchase documentation for specific warranty details and contact information.

You can typically find support contact information on the retailer's website where the product was purchased or directly through the Bellemave brand store.

Bellemave Store Link: Visit the Bellemave Store on Amazon