1. Product Overview
These YHTAUTO Pocket Bolt-Riveted Style Fender Flares are designed to provide additional tire coverage and a distinct aesthetic to your vehicle. Constructed from durable polypropylene, they offer protection against road debris and harsh weather conditions while maintaining a lightweight profile. This kit includes all necessary hardware for installation.
Image 1.1: Complete set of YHTAUTO fender flares with included installation hardware.
2. Vehicle Compatibility
This product is specifically designed for the following vehicle models:
- 2021 Ford Bronco Sport
- 2022 Ford Bronco Sport
- 2023 Ford Bronco Sport
- 2024 Ford Bronco Sport
Important Note: This product is NOT compatible with the standard Ford Bronco model.
Image 2.1: Visual confirmation of compatibility for Ford Bronco Sport models (2021-2023 shown, also applies to 2024).
3. Package Contents
Verify that all components listed below are present in your package before beginning installation.
Image 3.1: Detailed view of all fender flare components and hardware included in the kit.
Component List:
- Front Left Flare
- Front Right Flare
- Rear Left Flare
- Rear Right Flare
Hardware Kit Includes:
- U-Clips
- Retainers
- Torx Screws (5/16 x 18 x 3/8")
- Washers (0.320 x 0.700 x 0.035")
- Jam Nylock Nuts (5/16-18)
- Torx Bit (T-45)
- Black Nylon Retainers (8 x 20mm)
- Edge Trim
- Edge Trim Tool
4. Installation Instructions
Safety First: Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation. Ensure the vehicle is parked on a level surface with the parking brake engaged. If you are not confident in your mechanical skills, it is recommended to seek assistance from a qualified professional.
Required Tools (Not Included):
- Drill (if drilling is required for specific mounting points)
- Socket Wrench Set
- Measuring Tape
- Marker or Pencil
- Cleaning Solution and Cloth
Step-by-Step Guide:
- Preparation: Clean the vehicle's fender areas thoroughly where the flares will be installed. Remove any dirt, debris, or existing rust. Ensure the surface is dry before proceeding.
- Apply Edge Trim: Carefully apply the provided edge trim along the inner lip of each fender flare. This trim helps protect the vehicle's paint and provides a finished look. Use the edge trim tool for proper seating.
- Test Fit: Hold each fender flare against its corresponding wheel well to ensure proper alignment and fit. Identify all mounting points.
- Secure Mounting Points: Depending on your vehicle and the flare design, you may use existing factory holes or need to drill new ones. Insert the U-clips and retainers into the designated mounting locations on the vehicle.
- Install Flares: Position the fender flare onto the vehicle, aligning the holes in the flare with the installed U-clips and retainers. Secure the flare using the provided Torx screws, washers, and nylock nuts. Do not overtighten.
- Repeat for Remaining Flares: Follow the same steps for the remaining three fender flares.
- Final Inspection: Once all flares are installed, visually inspect them to ensure they are securely attached and properly aligned. Check for any loose hardware.
Image 4.1: Example of YHTAUTO Pocket Style Fender Flares installed on a truck, showing front and rear views.
Image 4.2: Illustration of how fender flares can cover existing fender damage or rust.
5. Care and Maintenance
To ensure the longevity and appearance of your YHTAUTO fender flares, follow these maintenance guidelines:
- Regular Cleaning: Wash the fender flares regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the textured matte black finish.
- Rinse Thoroughly: After washing, rinse the flares thoroughly to remove all soap residue.
- Inspect Periodically: Periodically check the mounting hardware for tightness. Vibrations from driving can sometimes loosen fasteners over time.
- UV Protection: The polypropylene material is designed to resist UV rays, but prolonged exposure to extreme sunlight can still affect the finish over many years. Regular cleaning and occasional application of a UV protectant designed for automotive plastics can help maintain their appearance.
Image 5.1: Rinsing fender flares with water for easy cleaning.
6. Troubleshooting Common Issues
- Issue: Flares do not fit correctly.
Solution: Double-check the vehicle compatibility section (Section 2) to ensure the flares are designed for your specific Ford Bronco Sport model year. Ensure you have correctly identified front/rear and left/right flares. - Issue: Flares feel loose after installation.
Solution: Re-check all mounting hardware. Ensure screws, washers, and nuts are tightened securely, but do not overtighten to avoid stripping threads or cracking the plastic. - Issue: Gaps between the flare and the vehicle body.
Solution: Ensure the edge trim is properly seated along the entire length of the flare. Re-adjust the flare's position and tighten fasteners evenly. Minor gaps may be normal due to vehicle manufacturing tolerances.
7. Product Specifications
- Brand: YHTAUTO
- Model: Pocket Bolt-Riveted Style Fender Flares
- Item Model Number: YHTFF00023
- Material: Polypropylene
- Color: Black
- Exterior Finish: Textured Matte Black
- Item Weight: Approximately 9.58 pounds
- Package Dimensions: Approximately 42.1 x 17.2 x 5.4 inches
- Fit Type: Vehicle Specific Fit (2021-2024 Ford Bronco Sport)
8. Safety Precautions
Always prioritize safety during installation. Improper installation can lead to product failure or vehicle damage. If you lack the necessary tools, experience, or confidence to perform the installation, it is strongly recommended to consult with a professional automotive technician.
Image 8.1: Safety reminder regarding professional installation.
9. Warranty and Customer Support
YHTAUTO products are manufactured to high standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official YHTAUTO website. For any questions, technical assistance, or to report missing/damaged parts, please contact YHTAUTO customer support through their official channels or the retailer where the product was purchased.
You can visit the YHTAUTO store online for more information: YHTAUTO Store