Besia ERF3J80H Universal Replacement Remote Control

1. Introduction

This manual provides instructions for the Besia ERF3J80H universal replacement remote control. This remote is designed to function with various Hisense 4K UHD Android Smart TV models without requiring any programming or setup. Simply insert batteries, and it is ready for use.

1.1 Compatibility

The ERF3J80H remote control is compatible with the following Hisense 4K UHD Android Smart TV series and models:

• A6G Series: 75A6G, 70A6G, 65A6G, 60A6G, 55A6G, 50A6G, 43A6G
• U6G Series: 55U68G, 65U68G, 55U6G, 50U6G, 65U6G, 75U6G, 50U68G, 75U68G
• U8G Series: 55U8G, 65U8G

Note: This remote control does not support voice command functionality.

2. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

• 1 x Besia ERF3J80H Infrared (IR) Remote Control

Batteries are not included and must be purchased separately.

3. Setup

3.1 Battery Installation

To begin using your remote control, you must install two AAA batteries.

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the battery compartment cover downwards to open it.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Figure 3.1: Steps for inserting AAA batteries into the remote control. The image shows the battery cover being removed, batteries being placed with correct polarity, and the cover being reattached.

3.2 Initial Use

No programming or pairing is required for this remote control. Once batteries are correctly installed, the remote is ready for immediate use with compatible Hisense TVs.

4. Operating Instructions

The ERF3J80H remote control features a standard layout for easy navigation and control of your Hisense Smart TV. Below is a diagram illustrating the main buttons and their functions.

Figure 4.1: Overview of the ERF3J80H remote control buttons and their corresponding functions.

4.1 Button Functions

• INPUT: Changes the TV input source.
• Power (Red Circle): Turns the TV power on or off.
• Number Buttons (0-9): Enters channels or input numbers.
• Dash (-): Selects a digital sub-channel.
• CC: Turns Closed Captioning on/off and can turn Closed Captioning on when mute.
• Colored Buttons (Red, Green, Yellow, Blue): Special function buttons, their use may vary by application or TV menu.
• Home (House icon): Displays the Home screen.
• FAV: Press to enter your customized input source or app. Press and hold to enter customization settings.
• D-pad (Up, Down, Left, Right): Navigation buttons for menus and selections.
• OK: Confirms selections.
• Back (Arrow icon): Returns to the previous place in the menu or app.
• Menu (Three lines icon): Button for the Menu.
• VOL +/-: Adjusts volume up or down.
• CH +/-: Changes channels up or down.
• Mute (Speaker with cross): Mutes and restores sound.
• Media Control Buttons (Rewind, Play/Pause, Fast Forward): Controls media content.
• MTS: Chooses the audio language in DTV mode and sets MTS for Mono, Stereo, or SAP in ATV mode.
• APPS: Provides quick access to all applications.
• Dedicated App Buttons (Netflix, Prime Video, YouTube, Disney+, Tubi, Peacock): Quick access buttons to specific streaming applications.

Please note: This remote control does not include a voice control function. Any button resembling a microphone icon is non-functional for voice commands on this specific model.

5. Maintenance

5.1 Battery Replacement

When the remote control's performance diminishes or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in Section 3.1 to replace the old batteries with new AAA batteries.

5.2 Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe the remote. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components. Ensure no liquid enters the remote control.

5.3 Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can cause damage. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your ERF3J80H remote control, please refer to the following common problems and solutions:

• Remote is not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace the batteries with new AAA batteries.
  • Ensure there are no obstructions between the remote control and the TV's infrared sensor.
  • Confirm the remote is pointed directly at the TV.
• Buttons are not working or are sticky:
  • Clean the remote control as described in Section 5.2.
  • If individual buttons are unresponsive, the remote may be damaged and require replacement.
• Remote range is limited:
  • Ensure batteries are fresh.
  • The maximum effective range is approximately 10 feet (3 meters). Operating beyond this distance may result in inconsistent performance.
  • Bright light sources or other infrared devices can interfere with the signal.
• Voice command function is not working:
  • This remote control model (ERF3J80H) does not support voice command functionality. This is an intended design and not a defect.

7. Specifications

8. Warranty Information

This product comes with a limited warranty. For specific details regarding the warranty period and coverage, please refer to the documentation provided at the time of purchase or contact customer support.

9. Customer Support

Should you have any questions, concerns, or require assistance with your Besia ERF3J80H remote control, please do not hesitate to contact our customer support team. We are available to help with any queries you may have.

Please refer to your purchase documentation for specific contact methods (e.g., email, phone number, website) for Besia customer support.