Feit Electric WLR2000/TRIPOD
Feit Electric 48 in. 4-Panel Each 5 W LED Work Light (WLR2000/TRIPOD) Instruction Manual
Model: WLR2000/TRIPOD
Introduction
This manual provides essential information for the safe and effective operation of your Feit Electric 48 in. 4-Panel Each 5 W LED Work Light. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
- Always ensure the work light is placed on a stable, level surface to prevent tipping.
- Do not look directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
- Keep the work light away from flammable materials.
- Do not expose the work light to extreme temperatures or direct sunlight for prolonged periods.
- This product is water resistant, but not submersible. Avoid prolonged exposure to heavy rain or submersion in water.
- Do not attempt to disassemble or modify the work light. Refer all servicing to qualified personnel.
- Keep out of reach of children.
Package Contents
Verify that all items listed below are included in your package:
- Feit Electric 48 in. 4-Panel Each 5 W LED Work Light (WLR2000/TRIPOD)
- Charging Block
- Charging Cable
- Canvas Carrying Bag

Image: The product packaging, highlighting key features and included accessories like the charging block, cable, and carrying bag.
Setup
- Unpack the Work Light: Carefully remove all components from the packaging.
- Extend the Tripod: Place the work light on a flat surface. Extend the tripod legs outwards until they are fully splayed and stable.
- Adjust Height: Loosen the locking collars on the telescopic pole sections. Extend the pole to the desired height (up to 4 feet) and then securely tighten the locking collars to prevent slippage.
- Position Light Panels: The four LED light panels are adjustable. Gently pivot each panel to direct light as needed. They can be folded inwards for compact storage or spread out for wider illumination.
- Charging: Before first use, fully charge the work light. Connect the charging cable to the USB-C charging port on the unit and plug the other end into the charging block, then into a power outlet. The battery indicator lights will show charging progress.

Image: The Feit Electric 4-Panel LED Work Light shown fully assembled on its tripod, ready for use.
Operating Instructions
The Feit Electric Work Light features intuitive controls for brightness and color temperature.
- Power On/Off: Press the power button located on the base of the light to turn the unit on or off.
- Adjust Brightness: Repeatedly press the power button to cycle through different brightness levels (High, Medium, Low).
- High: 2000 Lumens (approx. 2 hours run time)
- Medium: 1000 Lumens (approx. 4 hours run time)
- Low: 700 Lumens (approx. 9 hours run time)
- Change Color Temperature: Press the color temperature button (often indicated by a sun or color icon) to switch between Cool White and Daylight White light outputs.
- Detachable Head: The light head can be detached from the tripod for portable use. It can be placed on a tabletop, hung using the built-in hook, or attached to metal surfaces via integrated magnets.
Maintenance
- Cleaning: Wipe the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, collapse the tripod and fold the light panels for compact storage in the provided carrying bag. Store in a cool, dry place away from direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the unit regularly, even if not in active use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the work light fully. |
| Light output is dim. | Low battery or incorrect brightness setting. | Recharge the battery or adjust brightness to a higher setting. |
| Light flickers or turns off unexpectedly. | Low battery or internal issue. | Charge the battery. If the problem persists, contact customer support. |
| Tripod is unstable. | Legs not fully extended or locking collars not tightened. | Ensure tripod legs are fully splayed and all locking collars are securely tightened. Place on a level surface. |
Specifications
- Model: WLR2000/TRIPOD
- Brand: Feit Electric
- Brightness: Up to 2000 Lumens
- Wattage: 5 Watts
- Light Source: LED (4 panels)
- Color Temperatures: Cool White or Daylight White
- Power Source: Rechargeable Battery (Corded Electric for charging)
- Max Height: 4 feet (collapses to 18 inches)
- Features: Detachable Head, Water Resistant, Impact Resistant, Portable, Built-in Hook, Magnets
- Control Method: Push Button
- Material: Plastic
- Item Weight: Approximately 0.01 Ounces (Note: The provided weight of 0.01 ounces may be a data entry error and does not reflect the actual product weight.)
Warranty and Support
This Feit Electric product comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the official Feit Electric website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, visit the Feit Electric Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
