PDEEY 6V DC/AC Adapter Charger Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use of your PDEEY 6V DC/AC Adapter Charger. This product is designed as a replacement power cord for various compatible Fisher-Price and Ingenuity baby swings. Please read this manual thoroughly before use and retain it for future reference.

Important Compatibility Note: This adapter is specifically designed for 6V systems. It is NOT compatible with Fisher-Price Rock & Play models or other brands/models requiring 5V, 8V, 9V, or 12V power supplies.

Setup Instructions

Verify Compatibility: Before connecting, ensure your baby swing model is listed as compatible. Refer to the "Compatible Models" section or your swing's original manual for voltage requirements. This adapter is for 6V systems only.
Locate Power Port: Identify the DC power input port on your baby swing. This is typically a small, round port.
Connect Adapter to Swing: Insert the DC barrel tip connector of the PDEEY adapter firmly into the power input port of the baby swing. Ensure a secure connection.
Connect to Power Outlet: Plug the AC adapter plug into a standard 100-240V wall electrical outlet.
Power On: Once connected, the swing should be ready for operation. Follow your swing's specific instructions to power it on.

Image: The PDEEY 6V DC/AC Adapter Charger. This image shows the compact design of the adapter and its attached power cord with a DC barrel tip connector.

Operating Instructions

The PDEEY 6V DC/AC Adapter Charger functions as a power supply for your compatible baby swing. Once properly connected as described in the "Setup Instructions" section, the adapter continuously supplies power to the swing from the electrical outlet.

Ensure the adapter is always plugged into a functional wall outlet.
The adapter is designed for continuous use with compatible devices.
There is no LED indicator on this adapter to avoid light disturbance, especially in a nursery environment.

Care and Maintenance

Cleaning: Disconnect the adapter from the power outlet and the swing before cleaning. Wipe the adapter and cord with a dry, soft cloth. Do not use liquid cleaners or immerse in water.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly winding the cable to prevent damage.
Inspection: Periodically inspect the adapter and power cord for any signs of damage, such as frayed wires, bent pins, or cracks in the casing. If any damage is observed, discontinue use immediately and replace the adapter.
Safety: Keep the adapter out of reach of children and pets. Do not attempt to open or repair the adapter yourself.

Troubleshooting

Problem	Possible Cause	Solution
Swing does not power on.	Adapter not securely connected. Wall outlet is not functional. Swing model is incompatible. Adapter or swing is faulty.	Ensure the DC connector is fully inserted into the swing and the AC plug into the wall outlet. Test the wall outlet with another device. Verify your swing model is listed as compatible (6V system). If issues persist, contact customer support.
Adapter feels warm during use.	Normal operation.	A slight warmth is normal. If the adapter becomes excessively hot to the touch or emits a burning smell, unplug it immediately and discontinue use.
Swing functions intermittently.	Loose connection or faulty adapter/swing.	Check all connections. If the problem continues, the adapter or swing may be faulty.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.

Product Specifications

Model: PDEEY-INLIGHTEN-SWING-CHARGER
Input: 100-240V AC, 50/60Hz
Output: 6V DC (Voltage is determined by the compatible swing's requirements)
Cable Length: 6.6 feet (approximately 2 meters)
Connector Type: DC Barrel Tip Round Connector
Safety Features: Built-in smart IC chip, Over voltage protection, Over current protection, Over-Heat protection.
Dimensions: 1.5 x 2.49 x 2.5 inches (adapter unit)
Item Weight: 1.76 ounces

Compatible Models (Partial List):

This adapter is compatible with various Fisher-Price Snugabunny Cradle 'N Swing, Ingenuity Swing, Rainforest Cradle Swing, Butterfly Ocean Wonders, and Papasan cradle swings, including but not limited to models:

BGB37, BMF36, BMB21, BMM94, CCF38, CDG12, CDJ49, CHM69, CHM76
J4205, J8518, K4227, K7923, K7924, L1958, L1960, L2144, L8339
M1187, M6156, M7590, P0097, P2255, P9236, R9951
T1456, T3747, T4522, V3667, V0099, V1179, V4958
W1666, W9507, W9510, X2535, X4400, X7051, X7340, X7345, X7347
Y5708, Y8648, Y9422

Incompatible Models: This adapter is NOT compatible with Fisher-Price Rock & Play models or any baby swings requiring 5V, 8V, 9V, or 12V power supplies.

Image: Diagram illustrating the cable length of the PDEEY 6V DC/AC Adapter. The cable measures approximately 6.5 feet (2 meters), providing ample reach.

Warranty Information

Specific warranty details for the PDEEY 6V DC/AC Adapter Charger may vary. Please refer to the product packaging or contact the seller directly for information regarding warranty coverage and terms. Typically, power adapters come with a limited manufacturer's warranty covering defects in materials and workmanship under normal use.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact the PDEEY customer support team through the retailer where the product was purchased. Please have your product model number (PDEEY-INLIGHTEN-SWING-CHARGER) and purchase date available when contacting support.

You can often find contact information on the seller's page or through your order history on the purchasing platform.

PDEEY PDEEY-INLIGHTEN-SWING-CHARGER