Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bandai RG 1/144 Gundam SIDE-F Limited RX-93ff V Gundam model kit. The Real Grade (RG) series offers advanced articulation and intricate detail at a 1/144 scale, providing a realistic representation of the Mobile Suit. Please read all instructions carefully before beginning assembly.
Figure 1: Product packaging for the RX-93ff V Gundam model kit.
Safety Precautions
- Small Parts: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
- Sharp Edges: Some parts may have sharp edges or points. Handle with care during assembly to prevent injury.
- Tools: Use appropriate modeling tools (e.g., nippers, hobby knife) carefully. Adult supervision is recommended for younger builders.
- Ventilation: If using paints, glues, or markers, ensure adequate ventilation.
Package Contents
Verify that all components listed below are present before starting assembly:
- Main body runners (plastic parts for the Mobile Suit)
- Optional pair of hands (various hand gestures)
- Fin Funnel (long-range weapon system)
- Beam Saber (melee weapon)
- Beam Rifle (standard ranged weapon)
- Shield (defensive equipment)
- Tamashii Stage Joint (adapter for action bases, action base sold separately)
- Assembly instructions manual (this document)
- Decal sheet (for markings and details)
Figure 2: All included weapons and accessories.
Assembly Instructions (Setup)
Follow the numbered steps in the included pictorial guide for precise assembly. The following provides general guidance.
1. Preparation
- Carefully cut parts from the runners using nippers.
- Smooth any remaining nubs with a hobby knife or sanding stick for a clean finish.
- Organize parts by section (e.g., head, torso, arms, legs) to streamline the process.
2. Main Body Assembly
Assemble the core components of the Mobile Suit:
- Head Unit: Assemble the head, ensuring the clear visor piece is correctly positioned.
- Torso: Construct the chest, waist, and backpack units. Pay attention to internal frame details.
- Arms: Assemble the shoulder armor, upper arms, forearms, and attach the interchangeable hands.
- Legs: Build the thigh, knee, lower leg, and ankle armor sections.
- Combine: Connect the head, arms, and legs to the torso.
Figure 3: Assembled RX-93ff V Gundam in a dynamic pose.
3. Weapon and Equipment Assembly
Assemble the various armaments and defensive gear:
- Fin Funnel: Assemble the individual Fin Funnel units and connect them to the backpack mounting system.
- Beam Rifle: Construct the Beam Rifle, ensuring all scope and barrel components are secure.
- Shield: Assemble the shield, noting any movable parts or attachment points.
- Beam Saber: Assemble the Beam Saber hilt and attach the clear beam effect part.
Figure 4: Detailed view of the Fin Funnel.
4. Final Assembly and Posing
Attach all weapons and equipment to the Mobile Suit. Utilize the Tamashii Stage Joint if you plan to display the model on an action base for aerial poses.
Figure 5: RX-93ff V Gundam in an action pose.
Key Features and Articulation (Operating)
The RG RX-93ff V Gundam features advanced articulation and unique gimmicks:
- Advanced Inner Frame: The Real Grade inner frame provides a wide range of motion and stability for dynamic posing.
- Long Range Fin Funnel: The signature Fin Funnel can be deployed and articulated. Individual funnel units can be detached for display with effect parts (sold separately).
- Interchangeable Hands: Multiple hand options allow for various weapon-holding and expressive poses.
- Detailed Markings: The kit includes decals for intricate markings, enhancing the realistic appearance.
Figure 6: Rear view showcasing the Fin Funnel system.
Figure 7: Side view demonstrating the Fin Funnel's scale.
Care and Maintenance
- Cleaning: Dust your model regularly with a soft brush or compressed air. Avoid harsh chemicals.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent plastic degradation and color fading.
- Handling: Handle the model by its sturdy parts, such as the torso or legs, to avoid stressing delicate joints or accessories.
Troubleshooting
- Loose Joints: If a joint feels loose, a small amount of clear nail polish or hobby cement applied to the peg and allowed to dry can tighten it.
- Parts Not Fitting: Ensure parts are oriented correctly. If a part is too tight, gently sand the peg or hole. Do not force parts together.
- Missing Parts: Double-check the runners and packaging. If a part is genuinely missing, contact Bandai customer support.
Product Specifications
| Brand | BANDAI |
| Model Name | RX-93ff V Gundam |
| Scale | 1/144 |
| Material | Plastic |
| Product Dimensions (L x W x H) | 8.66 x 7.87 x 1.42 inches (packaging) |
| Item Weight | 1.94 pounds (0.88 Kilograms) |
| Included Components | Main body, Optional pair of hands, Fin Funnel, Beam Saber, Tamashii Stage Joint, Assembly instructions |
| Item Model Number | 4573102634108 |
Warranty and Customer Support
Bandai products are manufactured to high-quality standards. If you encounter any issues with missing or defective parts, please refer to the contact information provided on the product packaging or visit the official Bandai website for customer support. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the BANDAI Store on Amazon.
