johgee Salon Rolling Cart Instruction Manual

1. Introduction

Thank you for choosing the johgee Salon Rolling Cart. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cart. Please read these instructions carefully before use and retain them for future reference.

2. Safety Information

• Ensure all components are securely fastened before use.
• Do not overload the cart. Refer to specifications for weight limits.
• Keep hands and fingers clear of moving parts, especially during height adjustment.
• Use on a flat, stable surface to prevent tipping.
• Clean the cart regularly to maintain hygiene and prevent material buildup.
• Keep away from open flames or excessive heat sources.

3. Package Contents

Verify that all parts are present before beginning assembly:

• Main Tray with Wig Fixing Plate and Tool Holders
• Adjustable Support Pole
• Five-Star Base
• 5 x Stickless Wheels (Casters)
• 2 x Magnetic Bowls
• Assembly Hardware (screws, Allen wrench)

Image: All components of the johgee Salon Rolling Cart, including the main tray, support pole, five-star base, wheels, and magnetic bowls.

4. Assembly Instructions

Follow these steps to assemble your johgee Salon Rolling Cart:

1. Assemble the Base: Insert the five arms into the central hub of the five-star base. Ensure they click securely into place.
2. Attach the Wheels: Insert each of the five stickless wheels into the designated holes at the end of each base arm. Push firmly until they are fully seated.
3. Secure the Support Pole: Place the adjustable support pole into the central opening of the assembled five-star base. Secure it by tightening the screw at the bottom of the base using the provided Allen wrench.
4. Attach the Tray: Slide the main tray onto the top of the adjustable support pole. Ensure it is properly aligned and stable.
5. Install Magnetic Bowls: Place the two magnetic bowls onto the designated magnetic areas on the tray. They can be positioned on top or below the tray as needed.
6. Insert Tool Holders: Place the high-temperature resistant cups into the circular openings on the side attachment of the tray.

Image: Visual guide illustrating the assembly process, from attaching wheels to the base, inserting the pole, and mounting the tray.

5. Operating Instructions

5.1 Height Adjustment

To adjust the height of the tray:

1. Locate the retractable fixed knob on the support pole.
2. Loosen the knob by turning it counter-clockwise.
3. Adjust the tray to your desired height (between 27.7" and 43.3").
4. Tighten the knob by turning it clockwise until the pole is securely fixed.

Image: The cart illustrating its adjustable height range, from 28.7 inches to 43.3 inches.

5.2 Using Magnetic Bowls and Tool Holders

• The two magnetic bowls can be placed on the main tray surface or attached to the underside, providing flexible storage for hair color, solutions, or other small items.
• The integrated tool holders are designed to securely hold curling irons, brushes, scissors, and hair clips, keeping them organized and within reach. The cups are high-temperature resistant for hot tools.
• The wig fixing plate, located on the edge of the tray, is ideal for holding hair extensions or wigs during styling, coloring, or cutting.

Image: A close-up view of the tray, highlighting the magnetic attachment bowls and the various tool holders for salon equipment.

Image: The wig fixing plate in use, demonstrating how it holds hair extensions for easy access during styling.

5.3 Mobility

The five stickless wheels provide 360-degree rotation for smooth and quiet movement across various floor surfaces. The design helps prevent hair and debris from accumulating in the casters.

Image: The stable five-star base and the stickless wheels, designed for smooth movement and easy cleaning.

6. Maintenance

• Cleaning: Wipe down all metal and plastic surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners that may damage the finish.
• Wheel Care: Periodically check the wheels for any accumulated hair or debris and remove it to ensure smooth rolling.
• Fasteners: Regularly inspect all screws and connections to ensure they remain tight. Re-tighten as necessary.
• Storage: Store the cart in a dry, cool place when not in use.

7. Troubleshooting

• Cart is unstable: Ensure the base arms are fully inserted and the support pole screw is tightened. Verify the cart is on a level surface.
• Wheels not rolling smoothly: Check for hair or debris caught in the wheels and clean them. Ensure wheels are fully inserted into the base arms.
• Height adjustment knob is loose: Tighten the knob firmly by turning it clockwise.
• Magnetic bowls not holding: Ensure the bowls are placed directly on the magnetic areas. Clean any residue from the magnetic surfaces.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official johgee website. Keep your purchase receipt as proof of purchase.