1. Important Safety Information
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture. If you are unsure about electrical wiring, consult a qualified electrician.
- Bulb Type: Use only E12 base bulbs with a maximum wattage of 40W. Compatible with LED, Halogen, and Incandescent bulbs.
- Glass Shade: The milky white glass shade is fragile. Handle with care during installation and cleaning to prevent breakage.
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to moisture or outdoor elements.
- Dimmable Feature: This fixture is dimmable. Ensure compatible dimmable bulbs are used for optimal performance.
2. Package Contents
Verify that all components are present before beginning installation:
- Gold Globe Wall Sconce Fixture (x2)
- Milky White Glass Shade (x2)
- E12 Base Bulb (x2)
- Mounting Hardware Kit (screws, anchors)
- Plug Cord (pre-attached)
- Instruction Manual
Image: Two beatineon Gold Globe Wall Sconces, showcasing the complete product package including the E12 bulbs and power plugs.
3. Setup and Installation
These wall sconces offer two installation options: plug-in or hardwired.
3.1. Component Overview
Image: A detailed view highlighting the E12 lamp holder, the dimmable switch on the base, the frosted glass lampshade, and the US standard plug.
3.2. Bulb and Shade Installation
- Carefully unthread the retaining ring from the E12 lamp holder.
- Gently place the milky white glass shade over the lamp holder.
- Secure the shade by threading the retaining ring back onto the lamp holder until snug. Do not overtighten.
- Screw the E12 bulb into the lamp holder.
Image: A step-by-step visual guide showing the process of installing the E12 bulb and securing the glass shade onto the sconce.
3.3. Mounting the Sconce
The sconce can be mounted using the provided hardware. For plug-in use, ensure the power cord can reach an outlet. For hardwired installation, professional assistance is recommended.
Image: This image illustrates the two installation methods: plug-in with the cord visible, and hardwired for a seamless appearance.
- Determine the desired mounting location.
- Mark the positions for the mounting screws using the sconce base as a template.
- Drill pilot holes and insert wall anchors if mounting into drywall.
- Secure the sconce base to the wall using the provided screws.
4. Operating Instructions
The beatineon Gold Globe Wall Sconce features a dimmable switch for adjustable light intensity.
4.1. Powering On/Off
For plug-in installation, insert the plug into a standard 110-120V AC outlet. For hardwired installation, ensure the circuit breaker is turned on.
4.2. Adjusting Brightness
Locate the rotary dimmer switch on the base of the sconce. Rotate the knob clockwise to increase brightness and counter-clockwise to decrease brightness. Continue rotating counter-clockwise until a click is heard to turn the light off.
Image: A visual representation of the sconce's dimming capability, illustrating the range from off to full brightness.
5. Maintenance
5.1. Cleaning
- Always disconnect power before cleaning.
- Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
- Clean the glass shade with a soft, damp cloth and mild soap if necessary. Dry thoroughly.
5.2. Bulb Replacement
- Ensure the fixture is turned off and unplugged (or power is disconnected at the breaker).
- Allow the bulb to cool completely before touching.
- Carefully remove the glass shade by unthreading the retaining ring.
- Unscrew the old E12 bulb and replace it with a new E12 bulb (max 40W).
- Reattach the glass shade and retaining ring.
6. Troubleshooting
- Light does not turn on:
- Check if the plug is fully inserted into the outlet (for plug-in).
- Verify the circuit breaker is on (for hardwired).
- Ensure the bulb is securely screwed in and not burnt out.
- Confirm the dimmer switch is rotated past the 'off' position.
- Light flickers or dims inconsistently:
- Ensure you are using a dimmable E12 bulb. Non-dimmable bulbs may flicker with a dimmer switch.
- Check the bulb connection; tighten if loose.
- Glass shade is loose:
- Gently tighten the retaining ring that holds the shade in place.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | beatineon |
| Model Name | Globe Wall Sconces |
| Model Number | CD-BD |
| Color | Gold |
| Material | Glass, Metal |
| Product Dimensions | 13.5"L x 6"W x 9"H |
| Item Weight | 3.94 pounds (per sconce) |
| Power Source | Plug In Electric |
| Installation Type | Plug In (Optional Hardwired) |
| Special Feature | Dimmable |
| Control Method | Push Button (Dimmer Knob) |
| Light Source Type | LED, Halogen, Incandescent |
| Voltage | 110 Volts (AC) |
| Maximum Compatible Wattage | 40 Watts |
| Bulb Base | E12 |
| Shade Material | Glass |
| Indoor/Outdoor Usage | Indoor |
Image: A technical drawing illustrating the precise dimensions of the sconce, including height, width, depth, and cord length.
8. Warranty and Support
8.1. Warranty Information
This product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included in your package or contact beatineon customer service.
8.2. Customer Support
If you have any questions, require assistance with installation, or need to report a defect, please contact beatineon customer support. Refer to the contact information provided on the product packaging or the official beatineon website.