Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SOLLA 65W Smart LED Security Light, Model A26-U54. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Features
- 65W 8000LM Brightness: Provides powerful illumination for outdoor areas.
- Smart Control: App-enabled control via Bluetooth Mesh for various settings.
- Dimmable & Tunable White: Adjustable brightness (1-100%) and color temperature (2700K-6500K).
- Motion Sensor: High-sensitivity motion detection with 180° sensing angle and up to 72ft detection distance.
- Multiple Operating Modes: Auto Mode, Dusk to Dawn (D2D) Mode, Test Mode, Strobe Mode, and Manual Mode.
- Adjustable Heads: Three independently adjustable light heads for flexible coverage.
- Durable Design: IP65 waterproof, heat-resistant, and snowproof for all-weather performance.
- Easy Installation: Designed for straightforward wall or soffit mounting.
Image: SOLLA 65W Smart LED Security Light, showing the three adjustable light heads, motion sensor, and a smartphone displaying the control app.
Package Contents
Verify that all components are present before beginning installation:
- SOLLA 65W Smart LED Security Light (Model A26-U54)
- Iron Plate x 1
- Screws x 3 (various sizes)
- Silicone Plug x 1
- Wiring Cover x 1
- User Manual (this document)
Image: Components included for installation, such as the iron plate, screws, silicone plug, and wiring cover.
Installation
Safety Precautions
- Ensure power is turned off at the circuit breaker before installation.
- Consult a qualified electrician if you are unsure about wiring procedures.
- Wear appropriate safety gear, including gloves and eye protection.
- Do not install on unstable surfaces.
Mounting Options
The SOLLA Smart LED Security Light can be mounted on a wall or soffit.
Image: Illustration demonstrating the two primary mounting methods: soffit mounted (under an overhang) and wall mounted.
Installation Steps
- Prepare Wiring: Turn off power at the circuit breaker. Remove the existing fixture if applicable.
- Attach Mounting Plate: Secure the iron mounting plate to the desired surface (wall or soffit) using the provided screws. Ensure it is level and firmly attached.
- Connect Wiring: Connect the household wiring to the light fixture's wires (Live, Neutral, Ground) according to local electrical codes. Use the provided wiring cover and silicone plug to ensure a waterproof seal.
- Mount Fixture: Align the light fixture with the mounting plate and secure it. The design allows for easy attachment after wiring.
- Adjust Light Heads: Loosen the adjustment screws on each light head and the motion sensor. Position them to cover the desired area. Tighten the screws to lock them in place.
- Restore Power: Turn power back on at the circuit breaker.
Image: Detail of the adjustable light heads, illustrating their range of motion for directing illumination.
Operating Instructions
Initial Power-Up and Pairing
- After installation and restoring power, the light will enter pairing mode.
- Download the "SOLLA SMART" app from your device's app store.
- Open the app and follow the on-screen instructions to add your new device. The light uses Bluetooth Mesh for connection.
App Control Features
The SOLLA SMART app provides comprehensive control over your security light.
- Brightness Adjustment: Stepless dimming from 1% to 100%.
- Color Temperature Adjustment: Tunable white from 2700K (warm white) to 6500K (cool white).
- Operating Modes: Select from Auto Mode, Dusk to Dawn (D2D) Mode, Test Mode, Strobe Mode, and Manual Mode.
- Motion Sensor Settings: Adjust motion sensitivity and detection range (up to 72ft).
- Timer Function: Schedule ON/OFF times for energy saving.
- Group Control: Control multiple SOLLA Smart lights simultaneously.
Image: The SOLLA SMART app interface, demonstrating options for adjusting motion sensitivity, minimum brightness, and color temperature.
Image: The SOLLA SMART app's timer function, allowing users to set specific ON/OFF schedules for the light.
Manual Control Buttons
The light fixture also features physical buttons for basic control:
- DIST: Adjusts motion detection distance (e.g., 20ft, 40ft, 72ft).
- MODE: Cycles through operating modes (e.g., Test, D2D, Auto).
- DIM: Adjusts brightness levels or duration.
Image: Physical control buttons on the light fixture for adjusting distance, mode, and dimming.
Maintenance
- Cleaning: Periodically clean the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the motion sensor lens is clear of dirt and debris for optimal performance.
- Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening.
- Weather Resistance: The light is IP65 waterproof, heat-resistant, and snowproof. However, avoid directing high-pressure water jets directly at the fixture.
Image: The SOLLA security light operating under rainfall, highlighting its IP65 waterproof feature.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power; faulty wiring; light sensor obstructed. | Check circuit breaker. Verify wiring connections. Ensure light sensor is not blocked. |
| Motion sensor not detecting. | Incorrect sensitivity setting; sensor obstructed; incorrect angle. | Adjust sensitivity in the app or using the DIST button. Clean sensor lens. Adjust sensor angle. |
| Light stays on or flashes randomly. | Continuous motion detected; sensor malfunction; interference. | Check for objects causing continuous motion. Reset the light by cycling power. Ensure sensor is clean. |
| Cannot connect to app. | Bluetooth off; light not in pairing mode; app issue; out of range. | Ensure Bluetooth is enabled on your phone. Cycle power to the light to re-enter pairing mode. Restart the SOLLA SMART app. Ensure phone is within range (max 131ft/40m). |
| Light is not as bright as expected. | Brightness setting is low; D2D mode active with low brightness. | Adjust brightness to 100% via the app or DIM button. Check D2D settings in the app. |
Image: Illustration of Bluetooth connection ranges: Phone to Device (max 131ft/40m) and Device to Device (max 98ft/30m).
Specifications
| Feature | Detail |
|---|---|
| Brand | SOLLA |
| Model Number | A26-U54 |
| Wattage | 65 watts |
| Brightness | 8000 lumens (Max) |
| Color Temperature | 2700K-6500K (Tunable White) |
| Dimmable | Yes (1-100%) |
| Motion Sensor Angle | 180 degrees |
| Motion Detection Distance | Up to 72 feet |
| Control Method | App (Bluetooth Mesh), Physical Buttons |
| Indoor/Outdoor Usage | Outdoor |
| IP Rating | IP65 Waterproof |
| Power Source | Corded Electric |
| Voltage | 120 Volts (US style) |
| Product Dimensions | 6.5"L x 6.5"W x 5.8"H |
| Item Weight | 2.09 pounds |
| Material | Aluminum (Shade) |
| Finish Type | Powder Coated |
Warranty and Support
For warranty information and technical support, please contact SOLLA customer service. Refer to the product packaging or the official SOLLA website for the most current contact details.
SOLLA SMART is committed to providing high-efficiency and energy-saving lighting solutions. For app-related inquiries or assistance with smart features, please reach out to SOLLA support.
You can visit the SOLLA Store for more information: SOLLA Store on Amazon