TRACER TRABAT47063 MAGNI 50000 mAh Power Bank User Manual

Introduction

Thank you for choosing the TRACER TRABAT47063 MAGNI 50000 mAh Power Bank. This device is designed to provide portable power for your electronic devices, featuring advanced fast charging technologies such as QC3.0, PD, SCP, and Vooc. Please read this manual carefully before using the product to ensure safe and optimal performance. Keep this manual for future reference.

Important Safety Information

• Do not expose the power bank to extreme temperatures (above 60°C or below 0°C), direct sunlight, or fire.
• Do not immerse the power bank in water or other liquids.
• Avoid dropping, hitting, or disassembling the device.
• Keep out of reach of children.
• Use only certified charging cables and adapters.
• If the power bank swells, emits smoke, or shows other abnormalities, discontinue use immediately.
• Dispose of the power bank according to local regulations for electronic waste.

Package Contents

Please check the package for the following items:

• TRACER TRABAT47063 MAGNI 50000 mAh Power Bank
• USB Type-C Charging Cable
• User Manual (this document)

Product Features

• High Capacity: 50000 mAh polymer battery for extended power.
• Multiple Fast Charging Protocols: Supports Quick Charge 3.0 (QC3.0), Power Delivery (PD), SuperCharge Protocol (SCP), and Vooc for rapid charging of compatible devices.
• Versatile Connectivity: Equipped with USB Type-C port for input and output, along with other standard USB output ports.
• Intelligent Protection: Built-in safeguards against overcharge, over-discharge, overcurrent, and short circuit.

Setup and Initial Use

Charging the Power Bank

1. Before first use, fully charge the power bank.
2. Connect the provided USB Type-C cable to the power bank's input port.
3. Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a charger that supports Power Delivery (PD) or Quick Charge (QC).
4. The LED indicators will illuminate to show the charging status. Once all indicators are solid, the power bank is fully charged.

Operating Instructions

Charging Your Devices

1. Connect your device's charging cable to one of the power bank's output ports (USB-A or USB-C).
2. Connect the other end of the cable to your device.
3. The power bank will automatically begin charging your device. If not, press the power button once to activate charging.
4. The LED indicators will show the remaining battery level of the power bank.
5. Disconnect your device once it is fully charged or when you no longer need to charge.

Checking Battery Level

Press the power button once to check the remaining battery level. The LED indicators will light up to display the current charge status.

LED Indicator Guide

The power bank features LED indicators to display its battery status and charging activity. While the exact number of LEDs is not specified, a common configuration is:

• 1 LED lit: 0-25% battery remaining
• 2 LEDs lit: 25-50% battery remaining
• 3 LEDs lit: 50-75% battery remaining
• 4 LEDs lit: 75-100% battery remaining
• Flashing LED(s): Indicates the power bank is currently charging.
• All LEDs solid: Power bank is fully charged.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the power bank. Do not use harsh chemicals or abrasive materials.
• Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the power bank to about 50-75% every three months to prolong battery life.
• Avoid Over-Discharge: Do not allow the power bank to completely discharge for extended periods, as this can reduce battery lifespan.

Troubleshooting

Specifications

Warranty and Support

TRACER products are designed and manufactured to the highest quality standards. For information regarding warranty terms, technical support, or service, please refer to the warranty card included with your purchase or visit the official TRACER website. Please retain your proof of purchase for warranty claims.