tectake Yonkers 2-Tier Side Table Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your tectake Yonkers 2-Tier Side Table. Please read these instructions carefully before assembly and use to ensure safe and correct operation. Keep this manual for future reference.

Image: Front view of the assembled tectake Yonkers 2-Tier Side Table, showcasing its industrial design with dark wood shelves and a black metal frame.

Safety Information

• Do not immerse the product in water or expose it to excessive liquids.
• Do not exceed the recommended weight limit of 25 kg per shelf. Overloading can cause damage or injury.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
• Place the table on a flat, stable surface to prevent tipping.
• Keep small parts away from children during assembly to prevent choking hazards.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Side Table Components (shelves, metal frame parts)
• Assembly Hardware (screws, adjustable feet)
• Assembly Manual

Image: Illustration of the side table components, including wooden shelves and black metal frame parts, ready for assembly.

Assembly Instructions

Assembly is required for this product. It is recommended that one person performs the assembly. A screwdriver is the only tool required, and all necessary assembly tools are included in the package.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Adjustable Feet: Screw the adjustable feet onto the bottom ends of the four vertical metal frame legs.
3. Assemble Frame: Connect the metal frame pieces according to the included diagram. Ensure all connections are aligned correctly.
4. Attach Bottom Shelf: Secure the bottom wooden shelf to the lower section of the metal frame using the provided screws. Do not overtighten initially.
5. Attach Top Shelf: Place the top wooden shelf onto the upper section of the metal frame and secure it with the remaining screws.
6. Tighten All Screws: Once all parts are in place, gradually tighten all screws until they are firm. Do not overtighten to avoid damaging the wood or stripping the screws.
7. Level the Table: Adjust the height of the adjustable feet to ensure the table is stable and level on your floor.

Image: Close-up view of a metal leg attachment point, illustrating how components connect during assembly.

Image: Detail of an adjustable leveling foot, showing its design for height adjustment and stability on uneven surfaces.

Usage Guidelines

The tectake Yonkers side table is designed for indoor use in various rooms such as living rooms, bedrooms, offices, or hallways. It serves as a versatile piece of furniture for holding decorative items, books, lamps, or beverages.

• Weight Capacity: Each shelf can support a maximum weight of 25 kg. Do not exceed this limit to prevent damage.
• Placement: Position the table on a stable, level floor. Use the adjustable feet to compensate for any unevenness.
• Intended Use: This table is suitable for light storage and display. Avoid using it as a step stool or for heavy-duty tasks.

Image: The side table positioned next to a sofa in a living room, holding a plant and a glass, demonstrating typical usage.

Image: The side table serving as a nightstand in a bedroom, holding a lamp and books, illustrating its versatility.

Care and Maintenance

• Cleaning: Wipe clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the surface finish.
• Spills: Immediately wipe up any spills to prevent water damage or staining to the wooden surfaces.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Environment: Avoid placing the table in direct sunlight or near heat sources, as this can cause fading or warping of the wood.

Troubleshooting

• Table is Wobbly:
  • Ensure all assembly screws are securely tightened.
  • Adjust the leveling feet on the bottom of the legs to stabilize the table on uneven floors.
• Parts Don't Fit:
  • Double-check the assembly instructions and diagrams to ensure parts are oriented correctly.
  • Do not force parts together. If a part seems incorrect, verify it against the parts list.
• Missing Hardware:
  • Carefully check all packaging materials for small parts that may have been overlooked.
  • Contact tectake customer support for replacement parts.

Product Specifications

Image: Technical diagram showing the precise dimensions of the tectake Yonkers side table, including overall height, width, depth, and shelf spacing.

Warranty Information

The tectake Yonkers 2-Tier Side Table comes with a limited warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or visit the official tectake website.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact tectake customer support:

• Website: www.tectake.nl (or your regional tectake website)
• Email: Refer to your purchase documentation for specific contact email.
• Phone: Refer to your purchase documentation for specific contact number.

Please have your model number (404666) and purchase date ready when contacting support.