1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Varmilo Minilo VXT67 Mechanical Keyboard. The VXT67 is a compact 65% form factor keyboard featuring hotswap sockets for easy switch replacement, triple-mode connectivity (wired USB-C, 2.4GHz wireless, and Bluetooth), and RGB LED backlighting.
Please read this manual thoroughly before using the keyboard to ensure proper functionality and to maximize your user experience.
Figure 1: Top-down view of the Varmilo Minilo VXT67 Eucalyptus Mechanical Keyboard, showcasing its compact layout and keycap colors.
2. Package Contents
Upon opening the package, please verify that all the following items are included:
- Varmilo Minilo VXT67 Mechanical Keyboard
- USB-C to USB-A Cable
- 2.4GHz Wireless Receiver (USB Dongle)
- Keycap Puller
- Switch Puller
- User Manual (this document)
Figure 2: The Varmilo Minilo VXT67 keyboard displayed alongside its packaging box, indicating typical package contents.
3. Setup and Connection
The VXT67 keyboard offers three connection modes: wired, 2.4GHz wireless, and Bluetooth. Ensure the mode switch located on the bottom of the keyboard is set to the desired connection type.
3.1 Wired Connection
- Locate the USB-C port on the keyboard.
- Connect one end of the provided USB-C cable to the keyboard.
- Connect the other end (USB-A) to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
3.2 2.4GHz Wireless Connection
- Locate the 2.4GHz wireless receiver (USB dongle) in the package.
- Plug the 2.4GHz receiver into an available USB port on your computer.
- Ensure the mode switch on the bottom of the keyboard is set to "2.4G" or the corresponding wireless icon.
- The keyboard should automatically connect. If not, press Fn + 4 to activate 2.4G pairing mode.
3.3 Bluetooth Connection
The VXT67 can connect to up to three Bluetooth devices.
- Ensure the mode switch on the bottom of the keyboard is set to "BT" or the Bluetooth icon.
- To enter pairing mode for a specific slot, press and hold Fn + 1, Fn + 2, or Fn + 3 for 3-5 seconds until the corresponding indicator light flashes rapidly.
- On your device (computer, tablet, smartphone), open Bluetooth settings and search for new devices.
- Select "Varmilo VXT67" (or similar name) from the list of available devices to pair.
- Once paired, the indicator light will stop flashing and remain solid.
- To switch between paired Bluetooth devices, simply press Fn + 1, Fn + 2, or Fn + 3 (short press).
Figure 3: The underside of the Varmilo Minilo VXT67 keyboard, highlighting the mode switch for wired, 2.4GHz, and Bluetooth connections, along with the adjustable feet.
4. Operating Instructions
4.1 Function Key Combinations (Fn Layer)
The VXT67 utilizes an Fn (Function) key layer to access multimedia controls and system functions. Press and hold the Fn key, then press the corresponding key:
- Fn + F1-F12: Standard F-row functions (F1-F12 are typically accessed directly, but some keyboards use Fn for them. Assuming standard F-row is accessible via Fn layer for a 65% layout).
- Fn + Q/W/E: Switch between Bluetooth devices 1, 2, and 3.
- Fn + R: Switch to 2.4GHz wireless mode.
- Fn + T: Switch to Wired mode.
- Fn + Win: Lock/Unlock Windows key.
- Fn + Left Alt: Cycle through RGB lighting modes.
- Fn + Right Alt: Adjust RGB brightness (increase).
- Fn + Right Ctrl: Adjust RGB brightness (decrease).
- Fn + Arrow Keys: Adjust RGB lighting direction/speed (specific functionality may vary).
- Fn + Backspace: Reset keyboard to factory defaults (use with caution).
Refer to the keycap legends for specific Fn layer functions, as some keys may have secondary functions printed on them.
4.2 RGB Backlighting Control
The VXT67 features customizable RGB backlighting. Use the following key combinations to control the lighting:
- Fn + Left Alt: Cycle through various pre-programmed RGB lighting effects (e.g., static, breathing, wave, reactive).
- Fn + Right Alt: Increase backlight brightness.
- Fn + Right Ctrl: Decrease backlight brightness.
- Fn + Up Arrow: Increase lighting effect speed.
- Fn + Down Arrow: Decrease lighting effect speed.
- Fn + Left Arrow: Change lighting effect direction or color.
- Fn + Right Arrow: Change lighting effect direction or color.
Figure 4: The Varmilo Minilo VXT67 keyboard with its RGB backlighting illuminated, demonstrating the visual effects.
Figure 5: A detailed view of the Varmilo Minilo VXT67's RGB lighting, showing the illumination around and through the keycaps.
4.3 Battery and Charging
The keyboard is equipped with a rechargeable battery for wireless operation. When the battery is low, a flashing indicator light will warn you. The Escape key will light up while the keyboard is charging via the USB-C cable.
5. Maintenance
5.1 Cleaning the Keyboard
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and case.
- For dust and debris between keycaps, use compressed air or a small brush.
- Avoid using harsh chemicals or abrasive materials, as they may damage the keyboard's finish.
5.2 Replacing Keycaps and Switches (Hotswap Feature)
The VXT67 features hotswap sockets, allowing you to change mechanical switches without soldering.
- Removing Keycaps: Use the provided keycap puller to gently grip the keycap and pull straight up.
- Removing Switches: Use the provided switch puller. Align the prongs of the puller with the clips on the top and bottom of the switch. Squeeze the clips and gently pull the switch straight up.
- Installing Switches: Align the pins of the new switch with the holes on the PCB. Gently push the switch straight down until it clicks into place. Ensure the pins are not bent.
- Installing Keycaps: Align the keycap with the switch stem and push down firmly until it seats properly.
Figure 6: An angled perspective of the Varmilo Minilo VXT67 keyboard, highlighting the keycap profiles and the overall aesthetic, relevant for maintenance and customization.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keyboard not responding (Wired) | Loose cable connection, incorrect mode, driver issue. |
|
| 2.4GHz wireless not connecting | Receiver not plugged in, incorrect mode, interference, low battery. |
|
| Bluetooth connection issues | Not in pairing mode, already paired to max devices, low battery, device Bluetooth off. |
|
| RGB lighting not working or stuck | Lighting off, software conflict, temporary glitch. |
|
| Specific keys not responding | Faulty switch, debris under keycap/switch. |
|
7. Specifications
| Brand | Varmilo |
| Model | VXT67 |
| Keyboard Description | Mechanical |
| Connectivity Technology | Bluetooth, USB-C, 2.4GHz Wireless |
| Compatible Devices | PC |
| Keyboard Backlighting | RGB |
| Keycap Material | ABS Double Shot (1.5mm thick) |
| Special Features | Hotswap Sockets, Triple Mode, Indicator Light, Type-Cool Sound Dampening |
| Color (Switch Type) | Cherry MX Brown (Eucalyptus color scheme) |
| ASIN | B0BLPBYJW8 |
| First Available | November 7, 2022 |
8. Warranty and Support
Varmilo products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Varmilo website.
For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please contact Varmilo customer service through their official website or the retailer from whom you purchased the product.
Official Varmilo Store on Amazon: Varmilo Store
