LILYGO T7-S3

Download PDF
Contents

LILYGO T7-S3 ESP32-S3 Development Board User Manual

Model: T7-S3

1. Introduction

This user manual provides comprehensive instructions for the LILYGO T7-S3 ESP32-S3 Development Board. The T7-S3 is a versatile module based on the ESP32-S3-WROOM-1, featuring 16MB Flash and 8MB PSRAM. It supports Wi-Fi, Bluetooth 5, and Bluetooth Mesh connectivity, making it suitable for a wide range of IoT and embedded applications.

This document covers the board's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and detailed technical specifications.

2. Package Contents

Upon opening the package, please verify that all components listed below are present and in good condition:

  • 1 x LILYGO T7-S3 V1.1 Development Board
  • 2 x 2.0mm Long Female Pin Headers (1*10P)
  • 2 x 2.0mm Short Female Pin Headers (1*10P)
  • 2 x 2.0mm Male Pin Headers (1*10P)
  • 1 x JST 1.25mm 2-Pin Connector with wires
LILYGO T7-S3 package contents including the board and various pin headers

Figure 2.1: Contents of the LILYGO T7-S3 Development Board package. This image displays the main T7-S3 board, two sets of long female pin headers, two sets of short female pin headers, two sets of male pin headers, and a JST 1.25mm 2-pin connector with wires.

3. Board Overview and Pinout

The LILYGO T7-S3 board is designed for ease of use and integration into various projects. Below are images illustrating the board's physical layout and a detailed pinout diagram.

Front view of LILYGO T7-S3 ESP32-S3 Development Board

Figure 3.1: Front view of the LILYGO T7-S3 board, showing the ESP32-S3-WROOM-1 module, USB-C port, power switch, and boot button.

Back view of LILYGO T7-S3 ESP32-S3 Development Board

Figure 3.2: Back view of the LILYGO T7-S3 board, displaying the LILYGO branding and additional components.

Front and back view of LILYGO T7-S3 ESP32-S3 Development Board side by side

Figure 3.3: Combined front and back view of the LILYGO T7-S3 board, providing a comprehensive look at both sides.

Dimensions of LILYGO T7-S3 ESP32-S3 Development Board

Figure 3.4: Dimensions of the LILYGO T7-S3 board, indicating its compact size for integration into projects.

3.1 Pinout Diagram

Understanding the pinout is crucial for connecting peripherals and utilizing the full capabilities of the ESP32-S3. The diagram below details the function of each pin.

Detailed pinout diagram for LILYGO T7-S3 V1.1 ESP32-S3 Development Board

Figure 3.5: LILYGO T7-S3 V1.1 Pinmap. This diagram illustrates the various GPIOs, power pins, communication interfaces (UART, SPI), ADC, and Touch pins, along with indicators for charging and battery detection.

Key pin functions include:

  • GPIO Pins: General Purpose Input/Output pins for digital and analog signals.
  • Power Pins: 3V3, 5V, and GND for power supply.
  • Communication Interfaces: TXD/RXD for UART, CLK/TDO/TDI/TMS/TCK for JTAG/SPI.
  • Special Functions: Pins for ADC (Analog-to-Digital Converter), Touch sensors, and I2S.

4. Setup and Initial Use

4.1 Connecting the Board

  1. Power Supply: Connect the LILYGO T7-S3 board to your computer using a USB-C cable. The board can be powered via the USB-C port.
  2. Power Switch: Ensure the power switch on the board is in the "ON" position.
  3. Driver Installation: Your operating system may automatically install necessary drivers. If not, you might need to install the appropriate USB-to-serial drivers (e.g., CP210x or CH340, depending on the specific chip used on the board for USB communication).

4.2 Development Environment Setup

The LILYGO T7-S3 supports various programming languages and platforms:

  • Programming Languages: C/C++, MicroPython
  • Programming Platforms: Arduino-IDE, VS Code (with PlatformIO extension)

For detailed setup instructions and examples, please refer to the official LILYGO GitHub repository:

github.com/Xinyuan-LilyGO/T7-S3

This repository provides code examples, documentation, and community support to help you get started with your projects.

5. Operating the Board

5.1 Basic Operation

  • Power On/Off: Use the physical power switch to turn the board on or off.
  • Reset Button: Press the "RST" button to perform a hardware reset of the ESP32-S3 module.
  • Boot Button: The "Boot" button is typically used to put the ESP32-S3 into bootloader mode for flashing new firmware. Hold down the "Boot" button, press and release "RST", then release "Boot".

5.2 Programming and Uploading

Once your development environment is set up, you can write and upload your code to the T7-S3 board. The process generally involves:

  1. Writing your C/C++ or MicroPython code.
  2. Selecting the correct board model (ESP32-S3 Dev Module) and COM port in your IDE.
  3. Compiling and uploading the code to the board. The IDE will typically handle putting the board into flashing mode automatically, or you may need to manually use the Boot button as described above.

6. Maintenance

To ensure the longevity and optimal performance of your LILYGO T7-S3 Development Board, follow these maintenance guidelines:

  • Handle with Care: Avoid dropping the board or subjecting it to physical shock.
  • Static Electricity: Always handle the board in an anti-static environment or take precautions to discharge static electricity before touching it.
  • Cleanliness: Keep the board free from dust, dirt, and moisture. Use a soft, dry brush or compressed air to clean it if necessary. Do not use liquids or solvents.
  • Storage: When not in use, store the board in an anti-static bag or a protective enclosure to prevent damage.
  • Power Supply: Use only appropriate power sources (e.g., 5V via USB-C) to avoid damaging the board.

7. Troubleshooting

If you encounter issues with your LILYGO T7-S3 board, consider the following troubleshooting steps:

  • Board Not Detected by Computer:
    • Ensure the USB-C cable is securely connected to both the board and your computer.
    • Verify the power switch on the board is in the "ON" position.
    • Install or update the necessary USB-to-serial drivers (e.g., CP210x or CH340).
    • Try a different USB port or cable.
  • Failed to Upload Code:
    • Check if the correct COM port is selected in your IDE.
    • Ensure the board is in flashing mode (often achieved by holding "Boot" and pressing "RST", then releasing "Boot").
    • Verify that the correct board type (ESP32-S3 Dev Module) is selected in your IDE.
    • Close any other applications that might be using the serial port.
  • Unexpected Behavior / Code Not Running:
    • Perform a hard reset using the "RST" button.
    • Double-check your code for logical errors or syntax mistakes.
    • Ensure all external components are correctly wired according to the pinout diagram.
    • Check power supply stability.

For more advanced troubleshooting or specific issues, consult the LILYGO GitHub repository or relevant online forums for ESP32-S3 development.

8. Technical Specifications

Below are the detailed technical specifications for the LILYGO T7-S3 ESP32-S3 Development Board:

LILYGO T7-S3 V1.1 Specifications overview

Figure 8.1: LILYGO T7-S3 V1.1 Specifications. This image summarizes key features such as MCU, connectivity, memory, programming languages, and physical attributes.

FeatureSpecification
MCUESP32-S3-WROOM-1 Xtensa® 32-bit RISC-V MCU
Flash Memory16MB
PSRAM8MB
Wireless ConnectivityWi-Fi, Bluetooth 5 + BluetoothMesh
Programming LanguagesC/C++, MicroPython
Programming PlatformsArduino-IDE, VS Code
USB InterfaceUSB-C (Support USB 3.0)
Battery Connector1.25mm JST connector
Battery DetectionIO02
Programmable LEDIO17
Charging IndicatorBlue LED
Dimensions (L x W x H)Approx. 3.9cm x 3.1cm x 0.6cm (1.54 x 1.2 x 0.21 inches)
Item WeightApprox. 1.44 ounces
Operating SystemRTOS or Lightweight Operating System
Country of OriginChina

9. Warranty and Support

9.1 Warranty Information

Specific warranty details for the LILYGO T7-S3 Development Board are typically provided at the point of purchase or on the official LILYGO website. Please retain your proof of purchase for any warranty claims. Generally, electronic development boards are covered against manufacturing defects for a limited period.

For information regarding returns or replacements, please refer to the seller's return policy. The standard return policy for this product is 30 days for refund/replacement.

9.2 Technical Support

For technical assistance, programming guides, and community support, the primary resource is the official LILYGO GitHub repository:

github.com/Xinyuan-LilyGO/T7-S3

This resource contains up-to-date information, example code, and a platform for reporting issues or asking questions. You may also find helpful information on the LILYGO store page on Amazon or by contacting the seller directly.

LILYGO T7-S3 ESP32-S3 Development Board User Manual

© 2024 LILYGO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.