Hot Wheels Shelby Cobra 427 S/C Die-Cast Car Instruction Manual

1. Introduction

This instruction manual provides essential information for the Hot Wheels Shelby Cobra 427 S/C 1:64 scale die-cast model car. Please read this manual carefully before use to ensure proper handling and to understand product specifications and safety guidelines.

The Hot Wheels Shelby Cobra 427 S/C is part of the "Retro Racers" series, featuring iconic race cars designed for collection and play.

2. Safety Information

Warning: Not suitable for children under 36 months. Small parts may be generated.

This product contains small parts which may pose a choking hazard. Adult supervision is recommended during play, especially with younger children. While the manufacturer's general recommended age for some products is 0-3 years, this specific model carries a warning against use by children under 36 months due to small components.

3. Product Overview

The Hot Wheels Shelby Cobra 427 S/C is a meticulously crafted 1:64 scale die-cast replica. It features authentic details and a durable construction suitable for both display and play.

Figure 1: Front-side view of the Hot Wheels Shelby Cobra 427 S/C die-cast car, showcasing its design and details.

Figure 2: Top-down view of the Hot Wheels Shelby Cobra 427 S/C die-cast car, highlighting its iconic racing livery.

4. Setup and Operation

4.1 Unboxing

Carefully remove the die-cast car from its packaging. Dispose of packaging materials responsibly, noting the recycling information provided on the packaging (see Section 10).

4.2 Playing with Your Car

The Hot Wheels Shelby Cobra 427 S/C is designed for imaginative play and racing on compatible Hot Wheels tracks or other smooth surfaces. Ensure the play area is clear of small objects that could damage the car or pose a hazard.

This model is not intended for use with all Hot Wheels sets. Refer to specific Hot Wheels track set instructions for compatibility.

5. Maintenance and Care

To maintain the appearance and functionality of your Hot Wheels die-cast car:

• Cleaning: Wipe the car gently with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive materials, which can damage the paint finish.
• Storage: Store the car in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Handling: Handle the car with care to avoid bending axles, chipping paint, or breaking small plastic components.

6. Troubleshooting

As a static die-cast model, extensive troubleshooting is generally not required. If the wheels do not roll smoothly, check for any debris lodged in the axles. If the car appears damaged, refer to the warranty information in Section 8.

7. Specifications

8. Limited Lifetime Warranty

Mattel, Inc. warrants that any Hot Wheels Basic 1:64 scale car purchased in a single pack after January 1, 2013, will be free from defects in material or workmanship for the original purchaser's lifetime.

Claim Process: If defective, contact Mattel to make a claim via www.service.mattel.com. Mattel, in its sole discretion, may require proof of the product defect. Mattel will replace any defective car with a replacement car chosen in Mattel's sole discretion or with a voucher for a new Hot Wheels Basic 1:64 scale single-pack car.

Exclusions: This warranty does not cover damage resulting from accident, misuse, or abuse. This warranty is VALID ONLY IN THE U.S.A. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

9. Customer Support

For assistance or further information, please contact Mattel Customer Service:

• Website: Visit service.mattel.com
• Phone (US and Canada only): 1-800-524-8697
• International Contacts:
• Mattel Australia Pty. Ltd., Consumer Advisory Service: 1300 135 312
• Mattel East Asia Ltd., Hong Kong: (852) 3185-6500

Manufacturer: Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A.

Manufactured, imported or distributed by: Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. Mattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK.

Made in Malaysia.

10. Recycling Information

Please dispose of packaging materials responsibly. The packaging for this product typically includes:

• Paper Card: Check locally for recycling options. Remove from plastic tray before recycling.
• Plastic Tray: Note that plastic trays are often "Not recycled in all communities." Check local recycling guidelines.

For more information on recycling, visit how2recycle.info.